Digital Kaos >
The Garage >
Airbag, ChipTuning, Dash, ECU, IMMO, Locksmith, Radio, SatNav >
IMMO > renault clio 14, no aircon , sirius 32 , S110030304 D immo off flash needed please.
View Full Version : renault clio 14, no aircon , sirius 32 , S110030304 D immo off flash needed please.
raptureready
16th October, 2014, 09:47 PM
hi there
can anyone help with a tested immo off file for the flash chip am29f200bb from this Sirius 32 ecu for Renault clio 14 petrol without aircon,
the part no is, S110030304 D
8200024377
7700110471
thank you so much
kind regards282045
digi men
17th October, 2014, 01:19 AM
Here your file off !
cut 58 pin in ecu
raptureready
17th October, 2014, 05:58 AM
Here your file off !
cut 58 pin in ecu
thanks so much digi men, will try today and let you know if working, also wheres the best place to cut line 58, or do you bend the pin 58 so it does not enter plug? haven't done one before , all the best to you :joyous:
morfej
17th October, 2014, 07:14 AM
The best way is to disconnect immo line inside ecu.... by removing a resistor.
mananjohughie
17th October, 2014, 07:26 AM
hi morjef! where si the resistor that will be removed? is it available for sirius 32 and 34?
raptureready
17th October, 2014, 07:31 AM
thanks morfej, so I just follow where pin 58 comes into ecu on that track to the 1st resistor and then remove that resistor? thanks for the help!
raptureready
17th October, 2014, 10:58 AM
just tried this immo off file and the car swings and immo light flashes but does not start, i took resister off on line 58, if anyone else can give me a immo off dump for this flash file it would be great, my original flash dump of car is in my 1st post.
thanks digi men for your help anyway, kind regards
autodigitec
17th October, 2014, 11:23 AM
cut immo line
EDIT: SORRY POSTED VIRGIN FILE, NOT IMMO OFF, it might still work if you cut immo line but i havent tested
raptureready
17th October, 2014, 12:17 PM
thanks for the file , this file is immo off now or virgin , sorry not sure on this, also if a immo off file is correct will the immo light go out and car starts or stay solid or flash and car starts? never done one before so not sure on this also
the uch eeprom for key data is damaged and also tracks badly damaged, ive also bought a julie universal imulater but cant work out where to change data so it will work with imulator, thanks again guys
digi men
17th October, 2014, 12:26 PM
I newer removed some resistor, cut line 58 change file from 4000 to 8000 with FF and thats it, the light will still blinking and car starts normal, than open the tacho and if there is bulb take it out, some have led !
raptureready
20th October, 2014, 10:36 PM
ive tried both dumps for immo off and car swings but wont start, is there anyone else that can try immo off my flash file in post 1, would really appreciate it, all the best to you
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.