VIRGIN SAM 5WK45090 SMART FOR TWO

[storycars]

Hello,

i want to virgin new SAM for SMART, if i read 9S12 on board the dump not the sam at each reading and if i want to change dump by writing with UPA USB , I have error
If you have solution and dump virgin can you help me

thanks

[storycars]

the old sam is dead !

[storycars]

can you help me please ?

[bearheroes]

in order to read the SAM you have to lift one pin...

[electrones]

Hi friend

You can try this: form SAM V013 Smart roadster

Cheers

[pipina]

282393

282394

Hi, here you have all you need. 100% working R/W with UPA and vergin file ready to program with star or other tool.

regards

[storycars]

thanks for all, you are the best

[storycars]

i' m very happy, i programed as said pipina and it is good i managed. thanks pipina :top:
but with how to program with DAS ?

[petarcanev]

HI,PIPINA PASS PLEASE :) I HAVE SAME PROBLEM

[Multipla]

Hi all, I should not but I verginize transfer the file from the original to a donor bsi. My bsi is convertible and bsi donor is coupe. Thanks in advance I would like to know if you can do.

[auto ele]

hello can you give me the password please?thanks in advance

[fedorov12]

Hello can you give me the password please?
Thanks in advance.

[pititec]

Hi, help me please, I need too this dump. Thank you

[toni_18674]

hi pipina i have the same problem can you send me the pass please?
sam_vergin.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=282394&d=1413719450)

[rmkeizer]

282393

282394

Hi, here you have all you need. 100% working R/W with UPA and vergin file ready to program with star or other tool.

regards

Hi guys, i'm newbe with this subject but want to learn from you guys. i've got an old SAM and want to build a complete Smart to work on the table. To start this i want to virgin the SAM and EDG to work from schratch. Can someone tell me how this is done and what i need for the job?
Starters wit the pass for this RAR file.
And please be pation with me :girlshoite:

[diagpro]

may i have password please.

[elecman]

hi, can you send me the password please.

[amanha]

Hi , i would like to have password if possible, i have erased my flash.... thanks

[naruto123]

please can give the pasword . thanks

[naruto123]

please virgin this file , thanks

[diagpro]

try this one, inside was 2 file depend on what processor you have.
401509

[afmotorsport]

Hello. Can you give me the pass 2K79X please? Unfortunelly, I was try read eeprom with X Prog and for 5 times it reads, but always give me a buffer error in verification.<br>When I try to read the flash for backup, it gives same error and fails. I try read eprom one more time, it give same error, and in verification said that can?t identificate mcu.<br>After this, Xprog never read mcu anymore. In car the SAM don?t works. Do you have sugestions?<br>Now I?m trying to find a new SAM.

[bearheroes]

Firstly disable verification after read. Secondly you have to lift one pin.


Sent from my iPhone using Tapatalk

[afmotorsport]

I follow pipina connections and with upa, now I can read and write mcu. But, with this I found a problem.. Sam don?t works in car because it losts data, maybe when I try
read mcu with xprog something happens and it lost data. So, I have here the first file that I could read with XPROG

Can you check please if it is complete or corrupted? And, if it was correct, can you reset odometer data on it please?

Thank you in advance

[audiomeca]

file corrupt, try new read

[afmotorsport]

Lifting a chip pin, I can read and write eeprom and flash correctly. But I have a big problem: I wrote the v013 flash file and virgin eeprom file with xprog, but now
the sam don?t work, I connect it in car and turn ignition on, and nothing works, no lights, no info by sam in dash, no turn lights, nothing. It dies. Any ideas?

[kojara]

Hi Pipina can i get pw for virgin file ?
Thanks in advance

[dar7914]

Hello, can you send me the password please?
Thanks in advance.

[Boyang]

Hello! Pipina, may I have the pass word?

[ECU SOLUTION]

Pass please in pm please.....:star:

[ECU SOLUTION]

Pass in privat,thanks:applause:

[GTTURBO2540]

Hello can you share thw password, thanks

[alberto29011978]

try this one, inside was 2 file depend on what processor you have.
401509
Hello can you share thw password, thanks

[rock313]

Please provide the pass .thank you

[bymoe]

try this one, inside was 2 file depend on what processor you have.
401509

Great, I'll give a try. Thanks

[Brat]

Can i get the pass?

[pipina]

Can i get the pass?

Hi, here it is.

Regards

[Multipla]

I all comunity, a question in evidence can help me? In evidence red, is condenzator or other? and if is condenzator what is your valor? Tanks in advance.

[SAMDoctor]

Most of these are 10nf capacitor, haven't measured that one, but most likely would be. Let me know if you need any more help, I always have SAM units around.

[alberto29011978]

Pipina can you send me pass for this archive virgine Sam

[valdii]

Hi, here it is.

Regards

Hi, pipina .
Can i get the pass?

[joaopereira6]

282393

282394

Hi, here you have all you need. 100% working R/W with UPA and vergin file ready to program with star or other tool.

regards

Hi
I SAW you have the solution for put virgin Sam Smart Roadster.
Can you give-me the file password please?
Thankyou

[billys vtec]

Hi, here it is.

Regards

pass bro??

[papalos_]

Hi,

May I've virgin file for this used SAM?

Best Regards

[pipina]

Hi, here it is.

Regards

[smartprog]

Hi friend, can you send me password please??

Best regards

[easylectric]

Hi, can i also have pass please?

[apavlic008]

hi
can you send me a pass pipina
thanks

[darksool]

hi pipina,
can you send me the pass plz _0_

[cubica1]

Hi,
anybody has virgin file for SAM 3L40K, smart 454, 5WK4 5104C, or can make virgin from this file?
Thanks in advance,
cuby

[honkytonky]

hi guys,

can anyone help my witk a virgin dump for a roadster SAM orig in attachment

[honkytonky]

ups the dump ...