Isuzu Bosch ecu read DTC question

[ghostridersa]

Good day members of DK

I am helping a friend who is trying to scan the fault codes on an 2007 model Isuzu KB200 petrol which has a Bosch motronic ecu in it made in south africa.We havent been able to scan it with actia, snap-on, launch, bosch kts, avdi and don't have tech2. I also don't find a wiring diagram for the ecu or obd2 plug anywhere. It seems this vehicle has an old opel ascona engine in it but the ecu made in SA as a bosch motronic x20ne engine. (details included in pics)
Could the members please take a look at the pics I have included here and give me any their thoughts on how we can scan this one even if it means tapping directly into ecu.

Many thanks in advance

282263282264282265282266282267

[daniersms]

I think you must try and read it as flashcode with the testlight like in the older Corsas

[PierreTheron]

Try Scan with opcom as 1999 Omega x20se ecu .(Bosch Motronic )

Or try like this .... How to read ECU fault codes from some GM cars - Everything2.com (http://everything2.com/title/How+to+read+ECU+fault+codes+from+some+GM+cars)

Pierre

[BigJ]

Howzit Guys.:hello:

Done these before with Autocom.

But having said that, Im sure you have noticed there are not a lot of "diagnostic options" available on Isuzu's locally, albeit with Launch, Autoboss, etc.

Regards
J:)