IMMOBILIZER ACTIVE on vw dashboards HOW TO REMOVE IT?

[gomarota]

Ive done some immo off on edc15 and edc16 and edc17, but sometimes it shows the ugly message, immobilizer active or immo on in dashboard on display.like this photo:

282360




It possible to solve this for not to show that message?
how?

thanks

[16eddi67]

Im Byte 01E0 habe ich den Wert von F4 auf 74 und im Byte 01E1 von F7 auf 77 ge?ndert.

Best regards Eddy

[sepistar]

Im Byte 01E0 habe ich den Wert von F4 auf 74 und im Byte 01E1 von F7 auf 77 ge?ndert.

Best regards Eddy

Nacher alles ok?
Br.

[gomarota]

thanks for reply, an example, my last work was m7.5 golf iv

i attach ori file, i cannot found 1E0 value F4 and 1E1 value F7

[16eddi67]

thanks for reply, an example, my last work was m7.5 golf iv

i attach ori file, i cannot found 1E0 value F4 and 1E1 value F7

the address in the dashboard

[gokey]

if you have working key
leave the ignition on 1h

[gomarota]

thanks both, will try it

[jmcartec]

That's a good idea
im gonna test it in some days

[gomarota]

seems not working, one friend reported me:

I have try it, the immo and glow plug lamp is off, but also the other lamps (lima, handbrake,..) are off.
But the biggest problem, all ****og instrument (Speed, rpm, Gasoline, temperature) do not work

[chli1976]

seems not working, one friend reported me:

I have try it, the immo and glow plug lamp is off, but also the other lamps (lima, handbrake,..) are off.
But the biggest problem, all ****og instrument (Speed, rpm, Gasoline, temperature) do not work

It is golf IV 2001 engine AJM dashboard VDO 09 1J0920825C

I have also tried to set 1E0 alone and 1E1 alone. When i change only one byte i happens nothing, it is works as before

[audivwauto]

the checksum must be wrong ,just code a transponder to the cluster

[chli1976]

Can not learn a transponder, have tried it often, so i made immo off

[potatodog]

At all VDO (Golf4, Golf5, Golf6 and similar) dash it is possible at the config-bytes to disable immo complete

[gomarota]

How to do that ? I made some cars and they went away with same dash display

[DottoreBL]

At all VDO (Golf4, Golf5, Golf6 and similar) dash it is possible at the config-bytes to disable immo complete

how u do that ?

[sepistar]

At all VDO (Golf4, Golf5, Golf6 and similar) dash it is possible at the config-bytes to disable immo complete

i also can affirm that on config bytes,can make car fly like a helicopter!
but i have to prove this:stung:
br.

[potatodog]

So, i can make car fly like a helicopter!
Old Fabia dash 6Y0919880C with Immo on and off

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=290757&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=290758&stc=1

[obdsystems]

Got Audi A3 '06 faulty dash - its lost all coding (CS/MAC + Keys) but seems to have config data?

[DottoreBL]

I will realy appreciate if someone tell me how to dissable immo error on instrument cluster ?

[boubou93]

hi, i'm interresting for disable immo on dashboard VDO ;)

[sepistar]

So, i can make car fly like a helicopter!
Old Fabia dash 6Y0919880C with Immo on and off

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=290757&stc=1http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=290758&stc=1

so,please make this dump off for me.
299870
thanks
br.

[lupu_sandu]

You can try this:

[sepistar]

thanks,but not work like this.
already done the 2 adresses.
all lights are off but speedo and rpm not work.
br.

[boubou93]

At all VDO (Golf4, Golf5, Golf6 and similar) dash it is possible at the config-bytes to disable immo complete

Interesting ;)

[haingoben]

very interresting post

[anjo008]

In VDO Seat Leon the light appear sometimes. Inmo is disabled and working perfectly.


I cant put something in front of screen because inmo light is in digital screen.

Any solution?

Remove of transporders keys with VagTacho? Disconect transponder receiver?


Regards

[kiszka]

..........

[anjo008]

I will try first disconect transponder receiver.

[kiszka]

..........

[anjo008]

ok. I will try erase transponder keys. But Im not sure if i can remove with tacho or I need directly read 24c in dash.......

[kiszka]

..........

[xoslox]

Work change byte 01E0 from F4 to 74 and 01E1 from F7 to 77 ? I'll try disable "Immobil Activated" message by Dash Dump Edit software, but not succes.

[kiszka]

Work change byte 01E0 from F4 to 74 and 01E1 from F7 to 77 ? I'll try disable "Immobil Activated" message by Dash Dump Edit software, but not succes.
Who did you write this for? The last post was written four years ago

[xoslox]

I'm asking if it worked ?