Fiat Ullyse FAP DISABLE PLEASE...

[GolfmkI]

Hello , I have a litlle problem with this car, and I think best solution is to disable forever.

I have been trying to make myself, but I must recognise I am a bit newbey with winols....Even
when last months I?ve improved my knowledge about winols...I am not able at the moment.

Ecusafe dont work, it makes no changes....
Tried as a Citroen c8 but result given is not good.

FIAT ULLYSE


0281011522
EDC15C2
9655816780
9640968180
1039S05856
VAR:V A6Z
FE 07 072117


AM29F400BT INSIDE

Perhaps someone could help me?

Thanks Beforehand!!!

[tunertool]

Looks bad read?

[bobolin4o]

This file is useless.
How you readed it?

[GolfmkI]

Read with Willem in socket as always this 29f400....

It is possible to use other file from same Ecu??? Making Virgin obviously...

I have checked again and Willem took the same dump...... Perhaps Ive corrupted it...

[tunertool]

I think its bad read... why didnt you read it by OBD?

[Vasily.U]

Your file 283160 , but not use your programmer))). You can write file via OBD or in boot mode .
Your programmer read only first half of file 0 to 40000, chek contact pin 3 or jumpers on your willem.

[GolfmkI]

Thanks Vasily.U!!!

All of you are rigth, I have 2 problem:

One problem in my willem device.I am checking...Thanks for tips!!
One problem in my head, .....Why I have not used by obd???.....:banghead:. Was a long nigth, you know...

I supose car will start, as far as I know in EDC15C2 inmo related info is in backside eeprom. Isnt it??

One more time . Thanks to all!!!

[Vasily.U]

In EDC15C2 immo code in 5p08, but if you need immo off must change flash.

[GolfmkI]

In EDC15C2 immo code in 5p08, but if you need immo off must change flash.


As should be car start ok.
I have not make a ride to test , suppose Fap will not give me anymore headache...

Thanks again...