View Full Version : PCR 2.1 DPF OFF
kospoz
25th October, 2014, 08:31 AM
Hi all friends finally i have read pcr2.1 ecu.03L906023LP CAYC
Can someone help me to do dpf off please?283263
gttuning
25th October, 2014, 07:01 PM
Hi all friends finally i have read pcr2.1 ecu.03L906023LP CAYC
Can someone help me to do dpf off please?283263
dpf off.pass pm
kospoz
25th October, 2014, 10:10 PM
thank you my friend i will test it and report
konczer
25th October, 2014, 11:08 PM
after write unlock eeprom
ruscic
25th October, 2014, 11:18 PM
after write unlock eeprom
he must unlock to write.
kospoz
26th October, 2014, 09:00 AM
after write unlock eeprom
Friend what do you mean after write?First i will unlock the eeprom and then i will write.Am i wrong?
cool2503
26th October, 2014, 09:20 AM
No.is ok. First unlock and after write file
ruscic
26th October, 2014, 09:23 AM
Friend what do you mean after write?First i will unlock the eeprom and then i will write.Am i wrong?
you cant write until you unlock it.
when you unlock it, you can write via obd.
gttuning
26th October, 2014, 11:46 AM
did you take ecu out from this car to unlock for writing?
kospoz
26th October, 2014, 12:04 PM
did you take ecu out from this car to unlock for writing?
Yes the ecu has been unlocked and on Monday i will write it
gttuning
26th October, 2014, 10:03 PM
Yes the ecu has been unlocked and on Monday i will write it
so you r ok.if you see message ### correct checksum### press yes and follow instructions.and thats it.
kospoz
30th October, 2014, 09:35 AM
so you r ok.if you see message ### correct checksum### press yes and follow instructions.and thats it.
Today i have programmed the car and work well but one time i saw a little smoke is ok?Thank you my friend for your help
gttuning
30th October, 2014, 07:41 PM
file is tested done many of this,have you any DTC.
what car is this again?
mach1alex
31st October, 2014, 12:25 AM
Hi all friends finally i have read pcr2.1 ecu.03L906023LP CAYC
Can someone help me to do dpf off please?283263
Hello,how is the procedure for open,read and unlock this ECU?i have the same on my car and for read/write i have fgtech.
thanks.
gttuning
31st October, 2014, 12:36 AM
what toll have you?
mach1alex
31st October, 2014, 03:36 AM
what toll have you?
i have fgtech v53
Enviado desde mi GT-S6500 usando Tapatalk 2
kospoz
31st October, 2014, 07:30 AM
i have fgtech v53
Enviado desde mi GT-S6500 usando Tapatalk 2
First you must reset the value from the dpf i did it with autocom
Then you open it and follow the instructions that v53 telling you
Because i have v53 and it has problem with can bus via obd please test first if you can read it and if it will read it then procced with unlock and write
mach1alex
31st October, 2014, 10:10 AM
First you must reset the value from the dpf i did it with autocom
Then you open it and follow the instructions that v53 telling you
Because i have v53 and it has problem with can bus via obd please test first if you can read it and if it will read it then procced with unlock and write
ok,so i understand that the ECU it must be opened after the reset with autocom?!or all the procedures goes via obd!?
thanks
Enviado desde mi GT-S6500 usando Tapatalk 2
kospoz
31st October, 2014, 12:46 PM
ok,so i understand that the ECU it must be opened after the reset with autocom?!or all the procedures goes via obd!?
thanks
Enviado desde mi GT-S6500 usando Tapatalk 2
No be carefull!!! important first opening and do eeprom unlock and then via obd can read write.Can your tool read it because mine is doing only unlock
mach1alex
31st October, 2014, 01:08 PM
ok,understand now.....i will try and report
thanks
Enviado desde mi GT-S6500 usando Tapatalk 2
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.