KESS V2 need master

[salkapone]

Hello Everyone


I am looking for a master,, therefore possess alientech KESSV2 and I stopped cooperation with the previous master, so I need advice for someone who has good experience with some of the master with reasonable prices and sound files,,,

[ominimicu]

Is your tool slave? or master?
if its salve u can replace MCU and get tit working as master. if its master u can use any files in the world from any supplier

[chriskross]

which mcu and where can we get it??

[ominimicu]

get china MCU and tool becomes master! using original hardware and PCb :P

[morgano]

LPC2478FBD208

From china, farnell, digikey,...etc.

[moky]

or last nxp 2.07 with euro dealer..it will be better no? 1.89 is obsolete now...

[chriskross]

LPC2478FBD208

From china, farnell, digikey,...etc.



must the chip no be programmed? just desolder and solder will do it ?

[morgano]

Of course need to be programmed.

[ominimicu]

they sell already programmed, with 6o tokens i think, if u get the j arm link u can reprogram yourself

[morgano]

Already programmed chips come locked normally, no way to refill tokens with jlink. Best choice is blank chip and ensure you program it with non locked firmware.


Regards,

[salkapone]

no no....i wont find regular master,,without opening device...

thanks an advice ,,

[bondiblu]

Already programmed chips come locked normally, no way to refill tokens with jlink. Best choice is blank chip and ensure you program it with non locked firmware.


Regards, Or as Moky says, invest in something newer and better !

[morgano]

Yes, that is other chioce but a bit more expensive ;)


Regards,

[putopunto]

Yes, that is other chioce but a bit more expensive ;)


Regards,
Yes, a little more, but cost like china clone when first came, you get money back quickly. Bosch EDC17C46, EDC16C31 /35 , Ford MED17.2, Denso KS / DT, EDC17CP14, EDC17CP18, Magneti Marelli MJ8DF + also more tested. For now, I'm happy people don't buy it :) can mean I'm a step ahead of others lol

[morgano]

True ;) but you will pay again when tokens run out.


Regards,

[putopunto]

True ;) but you will pay again when tokens run out.


Regards,
No, not true ;) , already rest token 1 time. Maybe another supplier has this rule

[morgano]

You mean your supplier reset token in your unit every time you run out of them at no cost?

[b10m7]

or last nxp 2.07 with euro dealer..it will be better no? 1.89 is obsolete now...

Who sells NPX MCU 2.07 or 2.08?

[daniel guerra]

True ;) but you will pay again when tokens run out.


Regards,

I've reset mine once, and no charges!

[putopunto]

Who sells NPX MCU 2.07 or 2.08? I never seen NXP for sale, on new firmware.

[OVERSPEED]

it never was clear, the tokens count is only for MEDC17 or other older ECU types will lower down count ?

[moky]

I never seen NXP for sale, on new firmware.

I know one reseller who can (if stock..)

[bondiblu]

it never was clear, the tokens count is only for MEDC17 or other older ECU types will lower down count ? Its a write count, any write procedure lowers the count, it normally around ~ 30 tokens, you start seeing low tokens after 20.


I never seen NXP for sale, on new firmware. I'm sure all suppliers could do this, but they choose not to. My supplier,
don't supply just the NXP because, for a good solution, just NXP on a china clone is not enough for reliability.

[chiptorque]

any partner could send the MCU File 2.07 V or 2.08? and software?
and has more protocols? thanks and regards !!!

[peko]

i also interested ;)