Passat '96 1.9 TDI Immo off

[Fec001]

Can someone check if my immo off procedure ok in this dump? Car start only for 1-2 sec. I didn't disconnect the immobox because it is "pain in the ass"
ECU:
0 281 001 368/369
028 906 021AT
eprom B58253/24c02

[vlado kljucar]

when you made off you need to disconect immobox or lock eeprom...

[Fec001]

is the file ok?

[tqnata83]

file is correct
cut immo line pin 61 (ecu 1 plug ALL pin 68 ) or remove immo box

[vlado kljucar]

yes file is good and remove immobox

[Shmortz]

when remove immobox you need to short K line and W line, otherwise ECU diagnostic is impossible...

[Fec001]

so the best way is cut wire at pin 68( because ECU has 1 plug). Should I reprogram the ecu eprom again or just cut that line?

[TPS]

283849
my friend the best way is :

1. put in ecu immo off file
2. remove big plug from immobox or immobox
3. put ECU and start the car
4. on immobox plug joint W and K lines for diagnostic / use my info /

regards

[Fec001]

Hi!
I still having problems with this car. today removed immo box, write immo off file again, put back ECU to car and it starts only for 1 second after cut out. Uploaded the atual read of the eprom it has some difference. Never suck so much with TDI immo offs.... Car starts normally with immobox and trasponder in antenna.

[sepistar]

put this and start the car:
284117
br.

[Fec001]

will try this on monday!!!

[Shmortz]

here is your dump off

[Fec001]

Shmortz's file works perfect, cut immo line and all ok. Next time will try sepistar'S file.