PDA

View Full Version : Pinout Bosch edc7uc31 truck



chiptuner8
29th October, 2014, 04:10 PM
Hi guys,

anyone have pinout for this ecu? (Bosch edc7uc31 2 connectors)

I see what there are people what can do external read with galletto.

Thank you very much

Baddog84
29th October, 2014, 04:45 PM
Hi guys,

anyone have pinout for this ecu? (Bosch edc7uc31 2 connectors)

I see what there are people what can do external read with galletto.

Thank you very much

hope it helps

283799

warrio67
29th October, 2014, 04:52 PM
hi this is the pinout for this ecu
283801

chiptuner8
29th October, 2014, 07:14 PM
Thanks for your help!

MarcioFB
21st July, 2016, 03:02 PM
hi

Can you send me the Bosch EDC7UC31.pdf (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=283801&d=1414597946) please

My email is marcio-fb@hotmail.com

thank you so much

best regards

dominik.m
21st July, 2016, 04:40 PM
PINOUT Bosch EDC7 UC31

oem
21st July, 2016, 08:43 PM
Galletto will kill ecu by this pinout!

I killed two ecus with this pinout. Then repair by BDM, but is very hard work. Need resyhcro by diagnostic! This is not easy work because need engineering code from dealer for recync!

I have BDM pinout diagram on the top side. No need to open backside.

bayti
21st December, 2016, 08:54 PM
Galletto will kill ecu by this pinout!

I killed two ecus with this pinout. Then repair by BDM, but is very hard work. Need resyhcro by diagnostic! This is not easy work because need engineering code from dealer for recync!

I have BDM pinout diagram on the top side. No need to open backside.

Pleace send it here!

Act Tuning
21st December, 2016, 09:16 PM
Just flip the port and read with bdm and Ktag,

MagicProg
14th October, 2018, 02:24 PM
Galletto will kill ecu by this pinout!

I killed two ecus with this pinout. Then repair by BDM, but is very hard work. Need resyhcro by diagnostic! This is not easy work because need engineering code from dealer for recync!

I have BDM pinout diagram on the top side. No need to open backside.
CAN YOU SHARE THIS pinout plz ,,!!!!!