BMW E46 328 TUNE

[daveE46328]

Hello friends

Can anyone help me out and make a tune for my BMW E46? Car has headers and BMW 330i intake manifold.

Cheers,
Dave283900

[daveE46328]

Can anyone help out with a tune?

[mexanico1971]

Hi Dave !
that is a kind of car hard to do in the "dark" if you know what I mean !
I advice you get some knock device and AFR gauge , there allready exist MS42 tuning guide on web !
before check all vacuum pipes , and spark"s !
them advance inginicion tiil you start get knocking , them calibrate AFR

good luck

BR

[Cloudforce]

Hello friends

Can anyone help me out and make a tune for my BMW E46? Car has headers and BMW 330i intake manifold.

Cheers,
Dave283900

Well, i made an xdf for MS42 so that everyone can tune their cars themselfe. Problem is, there are several softwareversions and unfortunally yours is different to the one i made the xdf for. To be precise, your ecu uses 01100CA
and the xdf was written for 01100AD

When you?re using the xdf, your maps have offsets:

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=294761&stc=1

Nevertheless, if you want to use the xdf i can send you a virginized full-flash file which you can upload to your ecu in boot-mode and use the xdf.


Hi Dave !
that is a kind of car hard to do in the "dark" if you know what I mean !
I advice you get some knock device and AFR gauge , there allready exist MS42 tuning guide on web !
before check all vacuum pipes , and spark"s !
them advance inginicion tiil you start get knocking , them calibrate AFR

good luck

BR

Any hint on where to find that tuning guide?

[betrescudan]

Well, i made an xdf for MS42 so that everyone can tune their cars themselfe. Problem is, there are several softwareversions and unfortunally yours is different to the one i made the xdf for. To be precise, your ecu uses 01100CA
and the xdf was written for 01100AD

When you?re using the xdf, your maps have offsets:

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=294761&stc=1

Nevertheless, if you want to use the xdf i can send you a virginized full-flash file which you can upload to your ecu in boot-mode and use the xdf.



Any hint on where to find that tuning guide?
is the same guide like MS41

[Cloudforce]

Honestly i wouldn?t trust that guide to much ;) Its definately not usable at MS42 and i really doubt it works at MS41. Injection at part-throttle looks somewhat off, in my opinion.

[betrescudan]

Honestly i wouldn?t trust that guide to much ;) Its definately not usable at MS42 and i really doubt it works at MS41. Injection at part-throttle looks somewhat off, in my opinion.
bad opinion...

[Cloudforce]

bad opinion...

Really?

Basic injection at MS42 (2L) looks like this:

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295056&stc=1


Full-load injection correction looks like this:


http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295055&stc=1

How?s it possible to have a lambdamap with precision of 2, if the engine is equipped with narrowband lambda sensors that just can detect Lambda>1 and Lambda<1? How is that sensor possible to acchieve precision of 2? ;)

I may have a bad opinion, but that particular guide is definately lacking seriousness.

[betrescudan]

i maked somees remaps using the guide for MS41...and cars runs well without any probblems...remaps maded 2-3 years ago...so,no probblems if you like the "paper and the pencil"...i like real tests and real results...regards
and other thing mate...the WORLD was created without "paper and pencil " or " engineering calculator"

[bogdanwmw]

you need measuring instruments mixture . Gauge AFR. if you want to do it perfectly...