PDA

View Full Version : Sprinter DPF problem



credoline
30th October, 2014, 02:11 PM
Hi friends. Sprinter 311 2.1 is come to me with DTC 2078-8 (Particular filter differential pressure sensor - not plausible). DPF is physicaly removed and in flash is DPF removed with ESUSafe 1.93 or 2.0 (do it the same thing), but after engine good warm car go slow and after ignition off and ignition on engine go in Safe mode. ECUSafe remove DTC table and not any DTC is present. If i remove DPF with Volta, DTC table is enabled and i get DTC 2078-8. I can not find any other problem with car, all parameters are OK. ECU is Bosch 0 281 013 811.
Here is atached original file readed via OBD. Can anyone hlep with this ?
Thank you

16eddi67
30th October, 2014, 02:30 PM
try and report,pass PM.
disconnect connector from temperatur sensof and sensor diff.pressure
Best regards Eddy

credoline
30th October, 2014, 03:36 PM
File tested and worked excellent.
With disconnected sensors.
Great job.

argegsm
4th November, 2014, 09:16 PM
eddi great man for dpf off ..;)

cavignac
6th November, 2014, 11:08 PM
hi! DK's
I need this file fap off, Mercedes Sprinter 315CDI 906,633 EDC16cp31 A 0281014200
thank you in advance

16eddi67
7th November, 2014, 05:22 PM
try and report,pass PM.
disconnect connector from temperatur sensof and sensor diff.pressure
Best regards Eddy

cavignac
7th November, 2014, 09:26 PM
hi! DK's
the password is not good
the exact word password please

vladoford1
17th May, 2017, 09:54 PM
please help I need this file fap off egr off end more power, Mercedes Sprinter 2.2cdi a6461501677

vladoford1
17th May, 2017, 09:55 PM
450725
original file