Immo Off Fiat Punto bosch 0 281 001 955 help...

[Ricardoferreira]

Hi Friends...
I need your help for remove immo Fiat Punto 1.9 JTD year 2001
Bosch 0 281 001 955
What eprom i need to read?
Somebody can help me?
I send the photo
284052

Many thanks...
Good work...

[nikostzimis]

Programming the EEPROM 95P08 (5p0c3) will find a corner two eprom


Eprom new reference 95080

I have virgin and immo off

[Ricardoferreira]

Programming the EEPROM 95P08 (5p0c3) will find a corner two eprom


Eprom new reference 95080

I have virgin and immo off

I need to read eprom 95080?
And after i need send dump?
sorry friend but i don?t understand...
Can you explain me better?
Many many thanks friend...

[aem]

bosch med 7.6.1 ? bosch med 7.6.2 ? with 95080 inside?

[Ricardoferreira]

bosch med 7.6.1 ? bosch med 7.6.2 ? with 95080 inside?

I can?t find 95080 eprom in my ecu...
But now i don't have ecu with me...
I has send photo...Can you see?
Thanks friend

[aem]

is bad photo,i can see nothing.look inside after 5p08 eprom.read it and give us dump.

[Ricardoferreira]

is bad photo,i can see nothing.look inside after 5p08 eprom.read it and give us dump.
Ok friend..
But I read 5p08 as 95080 eprom? Or Other? I have carprog...
Many thanks

[aem]

1024 bytes have to be read.if not working with clip directly ,remove eprom.

[nikostzimis]

Read file, did not understand and that is all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AND POST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[nikostzimis]

READE EPROM EEPROM 95P08 OR (5p0c3)
SEND ME FILE

[nikostzimis]

hi aem bosch med 7.6.2 =st-10f275
bosch med 7.6.1=st-10f275

[aem]

i did not see from the begining ......955 and he dont know what is inside,anyway......

[nikostzimis]

284095284096
here foto galletto

[nikostzimis]

RICARDOFERREIRA read the eprom ?????Τhe eprom for Fiat Punto Bosch 0 281 001 955 is 95P08 (5p0c3) and 95 080 reads

and download the file here.......

[aem]

why you repeat?u need posts to be member not junior? :)

the file needs to be upload here not download. :)

[Positron2200]

Dear, Please post a new and clear picture for both sides. Maybe i can help you

[Ricardoferreira]

Dear, Please post a new and clear picture for both sides. Maybe i can help you

My Best friends here the file....
Read 95P08 eprom...
So now is for you...
Many Thanks for all and good work...

I can?t upload the file...why?

[Ricardoferreira]

284120

Here the file friends...

[Positron2200]

Dear, first you need zip or rar your file and after upload here.

[Ricardoferreira]

Hi friends....
I write the file in eprom and the car start....Ok....
so... first week car start, no problem...
Second week car sometimes start and sometimes doesn?t work...engine light on...
I read fault codes and appears "Checksum error"
I remove immo because the car only start if i disconnect battery cables....
The key have transponder...
Somebody know why?...
I read eprom on board and i write off board...
Please i need help...
many thanks for all...Good work!!!

[Ricardoferreira]

Nobody know how i can do?or what i do wrong?
Thanks...

[aem]

your tool make checksum when write ?

[Ricardoferreira]

your tool make checksum when write ?
My tool is carprog...I don?t know if make cheksum...Can you help me friend?
Thanks

[aem]

carprog not make checksum when you read directly eeprom.
.read again the file and give me to make checksum

[Ricardoferreira]

ok friend...
You need the file that i wrote? or you need the original file?
Many thanks friend...
If you need the file that i wrote is better dessolder first the eprom or i can read with her solded???