PDA

View Full Version : Audi edc17cp14 problem after modification



seba_m_
2nd November, 2014, 09:13 AM
Hi guys, can someone look at the correctness of software modifications? The problem is that in the higher gears slipping clutch. The clutch is driven 25,000. Audi A4 B8 2.0TDi CR EDC17CP14. The original software problem does not occur.

Babos
2nd November, 2014, 09:47 AM
it can be clutch problem!
But try less torque and check slipping or no.
Mod file look good but i look just maps no data but see that must be good job.

seba_m_
2nd November, 2014, 10:19 AM
Only the original file that does not exist. And you can help reduce torque?

gezame
2nd November, 2014, 10:55 AM
Hi
I think problema is in mod file.
Br.

seba_m_
2nd November, 2014, 10:57 AM
it will help someone solve the problem ??

betrescudan
2nd November, 2014, 11:16 AM
it will help someone solve the problem ??
i think this will be better

seba_m_
2nd November, 2014, 11:37 AM
Thanks friend. I'll check on and give a report.

seba_m_
4th November, 2014, 08:14 AM
It is much better but still on the 4th gear clutch slipping. On Friday, I assume a new clutch and I will inform about the results. Thank you all for your interest in my problem and the resultant help.

betrescudan
4th November, 2014, 09:28 AM
It is much better but still on the 4th gear clutch slipping. On Friday, I assume a new clutch and I will inform about the results. Thank you all for your interest in my problem and the resultant help.
clearly sommes problems with clutch...with a new one,you can return to the old remap...regards