Honda New Civic 2010 not start.

[datapage]

I have problem honda civic 2010 ecu imo and can not marry, can program transponder = ok.
I married ecu immo + = not ok.
tested with ECU used 3, 4 imos.
fly100, hds = same result.
tests:
ecu scanner = ok
immobilizer scanner = ok
LED imo flashing .

[okura]

married ecu/immo with bcm - fuse box?

[Ashraf6119]

married ecu/immo with bcm - fuse box?


Yes I agree you have to match again ECU, IMMO, BCM go in to immobiliser system diagnose it and follow the instruction of matching and you should be fine.......Or if you have Lunch Tool use that it has that option for matching.....

[datapage]

honda hds, I use fly100, xhorse MVCI 1.4.8,
Tried to marry ecu imo.
bcm needs to marry? I saw no option hds.

[datapage]

Photo servicehttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=284340&stc=1

[datapage]

install version HDS 3.013.016 MVCI FOR INTERFACE MVCI XHORSE. (HONDA, TOYOTA, VOLVO). 1- Install MVCI Driver for HONDA 1.4.5.msi.
2 TEST-DETECT IF IT WORKS SO INTERFACE MVCI XHORSE. (HONDA, TOYOTA, VOLVO)
3-RENAME FOLDER C: \ GenRad TO C: \ GENRADBACK.
4-RESTART PC.
3,013,016 HDS-5 INSTALL FOLLOW INSTRUCTIONS unzip and install. AFTER INSTALLING MAKE SURE IT WORKS
6-RESTART PC.
7-PATCH GNA600.
8-RESTART PC.
9-BETWEEN SECURITY MODE (F8)
10-enter the folder C: \ GENRADBACK COPY ALL CONTENT DiagSystem.
11-ENTERS THE FOLDER C: \ GenRad NECKLACE ALL CONTENT (REPLACE YES, ALL)
12-RESTART PC.
13-REINSTALLING MVCI Driver for HONDA 1.4.5.msi.
RESTART PC.
TEST NEW HDS 3.013.016. 100% OK WITHOUT BUGS.

[datapage]

solved with new bcm.