GaizkaV8
3rd November, 2014, 07:36 AM
Hello. I need to change the elv of vw passat 2006. I read the dump of the ecu. its simos ppd1.1.
Its posible to know the login with the dump I post?
Thanks in advance284310
Dmythross
3rd November, 2014, 07:49 AM
Give it a try with 40176
naelraddad
3rd November, 2014, 07:53 AM
try 40176
regards
GaizkaV8
3rd November, 2014, 09:57 AM
Ok perfect. But someone knows how to adapt with vagcom?
thanks
GaizkaV8
3rd November, 2014, 06:39 PM
Ok. solved
Providing the vehicle PIN works as expected please follow the next steps:
Make sure a battery charger is connected so the voltage is maintained.
[25-Immobilizer]
[Adaption - 10]
Leave channel at "00"
[Read]
[Save]
[Done, Go Back]
[Security Access-16]
Enter the vehicle PIN in a 5 digit format.
[Do it!]
[Adaption - 10]
Read Channel 051.
The Stored Value will be 32000. Enter the PIN in the New Value box.
[Test]
Wait | N/A | N/A | N/A Will be displayed. Wait until the ID numbers are transferred into the first 2 boxes. If you aren't sure, be patient and wait at least 30 seconds!
[Save] (Note: if Save is not available and the data in the last step has transferred continue by exiting)
[Done, Go Back]
Check fault codes in all installed control modules and clear them as needed
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.