PDA

View Full Version : DTC remove P2602 and P2600 Continental Simos 10.12



mariusica_boy
3rd November, 2014, 08:21 PM
Could some one help with remove P2602 and P2600 VW GOLF VI 1.2 TSI ?

DTC P2602 and P2600 Continental Simos 10.12

Thanks in advance

boomeer
3rd November, 2014, 09:58 PM
hi mate!
pass pm!

mariusica_boy
4th November, 2014, 07:18 PM
Your file working. Thank you very much.

spider-wifi
15th February, 2018, 01:59 PM
Hi,

I need DTC OFF from SIMOS10.12
O2 sensor2 is good, heating is working, but in ECU is resistance wrong.

Is possible DTC OFF in ECU? dump in attachment

Thanks

DTC: P0141 00 [039] and P0138 00

Address 01: Engine Labels: 03F-906-070-CBZ.CLB
Control Module Part Number: 03F 906 070 HT HW: 03F 907 309 AB
Component and/or Version: SIMOS10.12AH10 5422
Software Coding: 001900D6230400080000
Work Shop Code: WSC 73430 031 00208
ASAM Dataset: EV_ECM12TFS02103F906070HT 004006 (SK35)
ROD: EV_ECM12TFS02103F906070FS.rod
VCID: 7B8CFC9463798A2E0D-802E
1 Fault Found:

6385 - Oxygen (Lambda) Sensor B1 S2; Heating Circuit
P0141 00 [039] - Malfunction
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 164720 km
Date: 2061.14.29
Time: 15:45:58

Engine speed: 650.00 /min
Normed load value: 12.2 %
Vehicle speed: 0 km/h
Coolant temperature: 92 °C
Intake air temperature: 38 °C
Ambient air pressure: 960 mbar
Voltage terminal 30: 14.082 V
Unlearning counter according OBD: 40
Lambda probe voltage: bank 1: probe 2: 0.859 V
Heated oxygen sensor bank 1: sensor 2: resistance-Lambda probe heater: resistance: bank 1: probe 2: 65535 Ohm
Sensor control factor: output value-Lambda control value: bank 1: -1.503 %
Adaptive long-term value of mix. condition after cat. conv-LAMB_DELTA_I_LAM_ADJ[1]: 0.00000


Readiness: 0110 0101

johak
15th February, 2018, 02:11 PM
here you go

spider-wifi
15th February, 2018, 03:32 PM
Thanks!
I forgot to add delete DTC P013800 ?

johak
15th February, 2018, 03:41 PM
Thanks!
I forgot to add delete DTC P013800 ?


this is the file with p0138 and p0141

spider-wifi
16th February, 2018, 04:13 PM
this is nightmare, now after passing about 1km began to write:
1 Fault Found:

6429 - Oxygen (Lambda) Sensor B1 S2
P0136 00 [101] - Malfunction in Circuit
Not Confirmed - Tested Since Memory Clear


it is best to remove it too, I hope it will be good
:dead:

johak
16th February, 2018, 04:20 PM
this is nightmare, now after passing about 1km began to write:
1 Fault Found:

6429 - Oxygen (Lambda) Sensor B1 S2
P0136 00 [101] - Malfunction in Circuit
Not Confirmed - Tested Since Memory Clear


it is best to remove it too, I hope it will be good
:dead:

this is your file DTCs off
if you want use it

spider-wifi
19th February, 2018, 10:00 AM
Now OK, thanks