BMW E87 CAS2 EDC16C35 make it work

[kanzus]

Hello friends,
I have BMW Serie 1 E87 120D 2004 year.
After burnt org CAS2, I took second hand, change VIN and adapt keys, now ignition is OK without crank. I cannot make virgin and sync DDE7/CAS2 (have AVDI), I tryed IUD3 and Volta for eep and fla to make EDC16C35 virgin, it does not work for me.

Please help to make this ECU virgin so I can sync and start the car.

Thanks
284505
284506

[Rtronics]

if you copy eeprom data from damaged dump to donor, no need to sync or program anything. did you try that ?

[kanzus]

CAS eeprom original is no longer readable, I tryed to sync with second hand CAS after adaptation with AVDI Key tag for CAS2 with DDE7 but always SYNC NOT Possible.
more info: i changed new elv, and car is automatic gearbox.

Could you help me find ISN from CAS and DDE to make it sync.
Please help.

[raimi.s]

Read ISN from ecu and write to cas and do sync

[kanzus]

Do you know location of ISN in both items CAS and DDE7 ?
Please help !

[bram380]

write this dump and do syn dde-cas

[kanzus]

@BRAM820
Thank you for help, but still cannot sync DDE/CAS with files you sent.
Do you think EGS can prevent starting ?
When I read synchro codes with AVDI it shows only A42A in DME Line (bizarre).
Or synchro from CAS2 is 35 D5 isnt it ?
Do you think is better start from ECU and change synchro in CAS2 to 19 5E instead ?

[16eddi67]

try and report,pass PM.

Best regards Eddy

[kanzus]

Thank your for help.
Tryed with, but unfortunatly it doesn't work.
I think the problem is donor CAS2 its is different version, I must re-flash it with same FLASH and eeprom as original.
Please could you share CAS2 dump of this version:
CAS2
61.35-6943759
61.35 - 6 943 759
HW 02
SW 13.2
Cod 05
Diag 6A0

[kanzus]

Any help please ?