dominik.m
4th November, 2014, 11:27 PM
1. Read Your original file from ecu ( boot mode pin 20) and save it.
2. Unpack file "FIAT FLASH" and write to ecu
3. Connect two connector and turn ignition on and off several times
4. Write Your original file to ecu.
5. Done
- Car start , immo lamp on dashboard is off.
I tested it with different HW and SW number.
I am sorry for my English
2. Unpack file "FIAT FLASH" and write to ecu
3. Connect two connector and turn ignition on and off several times
4. Write Your original file to ecu.
5. Done
- Car start , immo lamp on dashboard is off.
I tested it with different HW and SW number.
I am sorry for my English