PDA

View Full Version : Reading problem EDC15C7 Ducato/Boxer/Jumper by OBD



Fec001
5th November, 2014, 10:08 AM
Hi!
Anyone knows what could be the problem while trying to read these cars by OBD?
China galetto2 can't read, Galetto EU v54 can't read, KWP can't read.
It's very annoying I have to desolder flash all time I get a van with this ECU.

Vasily.U
5th November, 2014, 10:12 AM
Not need desolder flash, just read in boot mode.

Fec001
5th November, 2014, 10:21 AM
Put boot mode doesn't help. Cannot read in boot mode either.

Vasily.U
5th November, 2014, 10:24 AM
It's strange, i use mpps china clone and all ok.

Fec001
5th November, 2014, 10:27 AM
OBD or Boot?

Vasily.U
5th November, 2014, 10:30 AM
Usually OBD, if without car boot.

Vasily.U
5th November, 2014, 10:32 AM
Maybe problem in drivers or com port settings ?

Fec001
5th November, 2014, 10:36 AM
Don'T know, every other type works perfect with v54. Only Honda EDC16 is the other type what can't be done through OBD, always have to do by BDM. If fomeone know solution maybe will share :)

k1champion
5th November, 2014, 05:27 PM
This Ecu can easy read by boot mode with mpps galletto 2 dont work !, you need to deslder immo eeprom in back side of the ecu, to read by boot!

Fec001
5th November, 2014, 07:57 PM
I got that info about desoldering immo eprom before. Next time will try that, but first ask about why it doesn't goes by OBD :)

k1champion
5th November, 2014, 08:15 PM
Because your immobox not working and disable to download by obd

Fec001
6th November, 2014, 08:32 AM
So when there is immo problem, then not possible programming by obd?

miha99
6th November, 2014, 08:35 AM
YES or make immo off and you can read ECU without immo box.

tunertool
6th November, 2014, 09:40 AM
Just desolder eeprom and all be ok. ;)

overs0ull
6th November, 2014, 10:11 AM
yes i have the same problems like this with this kind ecu but with desolder immo eeprom all is fine in boot mode with MPPS v12 ,and is litlle bit easy of this to desolder the flash .

k1champion
6th November, 2014, 03:53 PM
YES or make immo off and you can read ECU without immo box.
You cant ! again need to remove ecu and desolder immo eeprom.
B.r

johnxxl
19th November, 2017, 02:43 PM
I have a problem with reading the map boxer EDC15C7 immo broken, immobox is disconnected but reading over EOBD is not possible. Somebody help.

maajkii
19th November, 2017, 04:33 PM
I have a problem with reading the map boxer EDC15C7 immo broken, immobox is disconnected but reading over EOBD is not possible. Somebody help.

so just read it via bootmode.... :)

immokill
19th November, 2017, 07:04 PM
What tool use for obd? I always read via bootmode.

johnxxl
20th November, 2017, 06:17 PM
What tool use for obd? I always read via bootmode.

read galetto V54.