colouny
5th November, 2014, 11:09 AM
Hi all,
I must admit, i was stupid enough to to update firmware on my newly acquired MVCI. I got the device with 1.4.8 and updated to 2.0.1, just because i was unlucky setting up Honda HDS.
When i finally got to a point where the HDS was working fine, except two options. I was not able to connect to IMMO and Keyless Access ECU. Thout might help updating firmware, apparently that didn't help, it only bricked the device.
Anyway tried to re flash it with 1.4.7 firmware, it flashes ok, but wont connect to a car, when USB plugged in, it lights up Radio led, when applied +12V, power lights up, but USB led doesnt blink. And i can confirm that i was sort of working before, as i have added OEM RC engine starter to my friends accord.
My device is with RED pcb, v1.3 stamped on it.
If some one could help me to restore it working position, or maybe someone has the 1.4.8 firmware file, or any hint would be great.
Here are the pictures of the PCB: 1 (https://dl.dropboxusercontent.com/u/3512313/Photos/Photo%2003-11-2014%2009%2045%2014.jpg) 2 (https://dl.dropboxusercontent.com/u/3512313/Photos/Photo%2003-11-2014%2009%2045%2027.jpg)
Thanks everyone in advance,
I must admit, i was stupid enough to to update firmware on my newly acquired MVCI. I got the device with 1.4.8 and updated to 2.0.1, just because i was unlucky setting up Honda HDS.
When i finally got to a point where the HDS was working fine, except two options. I was not able to connect to IMMO and Keyless Access ECU. Thout might help updating firmware, apparently that didn't help, it only bricked the device.
Anyway tried to re flash it with 1.4.7 firmware, it flashes ok, but wont connect to a car, when USB plugged in, it lights up Radio led, when applied +12V, power lights up, but USB led doesnt blink. And i can confirm that i was sort of working before, as i have added OEM RC engine starter to my friends accord.
My device is with RED pcb, v1.3 stamped on it.
If some one could help me to restore it working position, or maybe someone has the 1.4.8 firmware file, or any hint would be great.
Here are the pictures of the PCB: 1 (https://dl.dropboxusercontent.com/u/3512313/Photos/Photo%2003-11-2014%2009%2045%2014.jpg) 2 (https://dl.dropboxusercontent.com/u/3512313/Photos/Photo%2003-11-2014%2009%2045%2027.jpg)
Thanks everyone in advance,