PDA

View Full Version : Siemens PPD 1.2 Hot start problem?



Fec001
5th November, 2014, 02:18 PM
Hi!
Mechanics ask me to repair hot start error in siemens PPD. As I know there is no "problem" with start maps in PPD software.

mishu_b
5th November, 2014, 02:49 PM
it can be solved from sw as well, if the complete mechanical system is OK.

Fec001
5th November, 2014, 02:54 PM
It has got timing belt changed so maybe that is the source of the problem.

mishu_b
5th November, 2014, 03:24 PM
first be sure that the complete mechanical system is 100% OK.
usually the last thing for this is to mod the sw in order to fix the HotStart

atomiczen
5th November, 2014, 03:55 PM
i know 140cv ppd1.2 have this problem also

jopaf
5th November, 2014, 07:24 PM
If it was from the change of the timing belt probably you would have problem not only with the hot start. But mates are right, check all the mechanics before looking for software solution. Good luck!

Fec001
5th November, 2014, 07:54 PM
mechanics readjust "shafts timing", all seems fine now. Thank you for infos!!!!