PDA

View Full Version : Yaris D4D 2004 immo info



Autofix
5th November, 2014, 02:20 PM
Hi,

I have a 2004 Yaris D4D with a Bosch ECU number 89660-5C010.

Can anyone tell me if this has an immo box or is the immo data in the ECU?

It is a lost key problem if anyone has a virgin dump for it that would be good.

Thanks

Autofix
5th November, 2014, 02:54 PM
If the data is in the ECU I will post later looking for virgin. If it has immo box behind the heater I will post in a couple of days when I get time to remove it.

Autofix
5th November, 2014, 06:29 PM
Someone has been at this before me.

Numbers on the other side of the ECU
0 281 011 126
89661-52890

Eeprom is burned but I can read 950xx. Could be 95020, 95040 etc. Anyone know what is should be?

Anyone have a virgin dump?

Autofix
6th November, 2014, 10:16 AM
Eeprom is 95080 but burned and data lost.

Anyone have original file for this ecu 95080.

keysph
6th November, 2014, 10:52 AM
Your ECU is Bosch so must have a 95080.
But from my knoledge if it is 2004 must have a immo box.
Post a picture with your car.

Autofix
6th November, 2014, 11:44 AM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=284838&stc=1

keysph
6th November, 2014, 12:07 PM
That's a 4c toyota.
Read memory from ECU and post here with tiris data from 4c chip.

Autofix
6th November, 2014, 01:26 PM
Thanks,

That is the problem. The other shop burned the eeprom so i do not have a dump for 95080. I need one.

caliskan71
6th November, 2014, 04:54 PM
virgin files in here

super jumbe
6th November, 2014, 09:06 PM
Read key data we will send you file to write to the new 95080 eeprom to the ECU to start the car.

Autofix
8th November, 2014, 02:55 PM
super jumbe, i will post tiris data on Tuesday.

Thanks for the help. So far nothing has worked.

The other shop has given me a file that they say is original. Could someone check it and tell me if it looks good please?

Can anyone tell me where the key data is in this file?

Thanks

cjawahir
9th November, 2014, 12:28 PM
Try this file and use the data to make new key , or send print screen of 4c key data and i will edit dump for u .

cj

Autofix
11th November, 2014, 01:56 PM
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=285577&stc=1

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=285578&stc=1

Autofix
11th November, 2014, 01:58 PM
key data photos above.

thanks in advance

cjawahir
11th November, 2014, 07:07 PM
hello try this file let me know if work

cj

Autofix
11th November, 2014, 11:10 PM
Thanks to all for the help.

CJ, thank you. that worked.
I think my dump was wrong because the LED is flashing all the time. I will take a look at that tomorrow but it starts now and drives good.