Passat 1.9 Tdi immo -off

[armpower]

Hallo

I've a Passat 1.9 Tdi year 2000 ecu N. 038906018GA 0281010170.
The car came with a no start fault.
Start for 2 second than cut and die.
Seems a Immobilizer related problem.
In engine ecu there is a P1570 error.Ecu locked.
In instrument and immo there aren't any error or fault related to some malfunction.
I've tried to apply a immo emulator to the car but with no success.
So i've take apart the ecu, read the 24C02 and make a immoff with immo decoding 3.2
The question is.Can you taka a look to the files and told me if the immo-off applied with immo decoding is correct?

Which wire have i to cut or short in the engine ecu to prevent immo communication?
I want to be able to do diagnostic session also after immo-off.
Please any advice is welcome.

Cheers

[dantetimoc]

for this ecu: 038906018GA 0281010170 must be a 2 plug ecu with 24c02 and motor code must be AVG.
you will not have a separate immo box, immo box must be incorporated in dash! you dont need to disconect anything.
put atached file in ecu eeprom and car must be start. i have tested this solution is 100% ok!

[armpower]

Hallo

I've tried the solution but don't work.
LAter i will try to find what's happen.
ANy idea or solution?

Thanks

[dantetimoc]

hmmm...
maybe this:

[armpower]

Hallo mate

Good job.Thank you very much.
The car work like a charm.
Instead the file generated with immodecoding 3.2 not work.

Thanks again

Cheers

[bogdanwmw]

For vag edc15 works best vag commander 1.4...

[JIMMYQ]

i have similar ecu same part but cant find the 24c02 ? no eeprom says 24c02

[locksmith383]

%100 working thank you so much

[robert1232]

hi frends immo off too
24c02
0281010170
038906018GA

060-60
080-60 not wort

[kiszka]

hi frends immo off too
24c02
0281010170
038906018GA

060-60
080-60 not wort

https://mega.nz/file/gvhijLQa

[brend]

hi frends immo off too
24c02
0281010170
038906018GA

060-60
080-60 not wort


Old school.
Need to be blind not to make an immo-off in this eeprom.

Open kiszka options and you will see , what I mean.

[kiszka]

Old school.
Need to be blind not to make an immo-off in this eeprom.

Open kiszka options and you will see , what I mean.

you're right BREND I did it right
but apparently he had a file made in the same way
but the problem with immo is not only the lack of synchro, there are also other faults that appear the same
regards
I think it's the next one that can't check if it's an immo problem

[robert1232]

frends car start with a key and without a transponder no. as I uploaded the file that I converted it does the same

[rafal]

frends car start with a key and without a transponder no. as I uploaded the file that I converted it does the same

Find out other problem with car

[kiszka]

frends car start with a key and without a transponder no. as I uploaded the file that I converted it does the same

this is the only solution, and you will not get another one because there is no other solution

[robert1232]

here is good one car start
thanks frends for replay any way

[brend]

here is good one car start
thanks frends for replay any way

About immo off!

Mate!...........Don't mislead people!

Totaly ''''''bull.shut'''' .

Open in hex and look at better , this dump from another ecu and this is stock and no immo off in here !

[kiszka]

About immo off!

Mate!...........Don't mislead people!

Totaly ''''''bull.shut'''' .

Open in hex and look at better , this dump from another ecu and this is stock and no immo off in here !

my friend it's a pity to talk to him let him work ecu we'll see how long
what you said is enough
He is the Elder and will stay that way