Audi A4 2006 2.0 tdi bosch edc16u31 need hotstart fix

[catala20032004]

Hello,
Need help with hot start fix problem to audi a 4 20tdi bosch edc16u31. Full read attached.
Thanks

[Vasily.U]

Your fix
285050

[catala20032004]

with this dump the car doesn't start anymore. can anyone tell me if its read ok? my thinking is that maybe the cr has tuning protection and I didn't read the file correctly. I used for reding byteshooter. after writing Vasily solution the car didn't recognize the ecu. Anyone has a original file 03G906016FC ? full read 512?
??

[gttuning]

did you try to write back your ori file,if tp you wont be fit to read at all.

[Vasily.U]

Your ori not full. It's full 285080
And fix without cs correction 285081

[catala20032004]

I've put the original back into the car. It's a nightmare this type of ecu to write with byteshooter. I think i tried to write it at least 50 times untill succeded to complete writing original back to ecu. Ecu was bloking everytime to a different percentage. After 2 hours, and i dont exagerate here, finaly succeded.

[catala20032004]

So Vasily wich file should i write into car? So i take it that my reading original is ok?

[Vasily.U]

I never use byteshooter , haven't it. Mayby you have MPPS or BDM ? Your ori good only for byteshooter other tools need file 2 mb. My first fix too right for byteshooter. I dont know why you have this problem, maybe problem in hw or soft your pc or byteshooter?

[gttuning]

if car starts now better get bdm,or different toll that will read 2mb file,some times happens that edc16 will not start(happen to me twice with fgtech) but mpps has slow speed recovery mode and most times can write back ori.

[Vasily.U]

if car starts now better get bdm,or different toll that will read 2mb file,some times happens that edc16 will not start(happen to me twice with fgtech) but mpps has slow speed recovery mode and most times can write back ori.
if i have problem with vag edc16 after write I desolder 95320 doing immo off and after that can write any file without problem by obd any tools.