FGTech Injector Code file Qashqai

[baltazar3]

Qashqai 2008 EDC16CP33
0281013855 ...forgot to read injector codes before write ...
Need correct Injectore code file from FGTech "INJECTOR CAN CODER".
Here is my file after write readed by FGTech

Thanks in advance !

[pulsar2000]

had same happen x trail, does she start - Probably no,
you need Consult to recode, and in order 4321, from injectors and all will be good, had same slip up before... hope u get sorted

[baltazar3]

Solved ...coded injector with KTS,read CODE file and rewrite with same file.

[pulsar2000]

great 2 hear, did u have no start due to inj codes, ? ok yes Bosch KTS,,,, V Good

[Walid khalifa]

Hi mate
I have a pronlem with nossan quashqai 2.0 dci with injector code lost after removibg FAP.
could you help by explaining what should i do exactly? Even the original backup couldn't start the car

[baltazar3]

Hi mate
I have a pronlem with nossan quashqai 2.0 dci with injector code lost after removibg FAP.
could you help by explaining what should i do exactly? Even the original backup couldn't start the car
Write this with FGTech "injector CAN coder"
DO NOT write without key in (with keyless)

[Walid khalifa]

please what do you mean by injector can coder;
thanks

[pulsar2000]

please what do you mean by injector can coder;
thanks

what tool you lose codes with ? whilst flashing

[Walid khalifa]

what tool you lose codes with ? whilst flashing
Fg tech galetto

Sent from my SM-A710F using Tapatalk

[pulsar2000]

please what do you mean by injector can coder;
thanks

what tool you lose codes with ? whilst flashing

go to inj coding - under nissan and use the guys file he supplied, and write it. then dont start car, clear codes and try
if doesnt work, do same again and instead write back orig,
problem you got is ecm chain of command error its a headache but can be sorted,

[Walid khalifa]

what tool you lose codes with ? whilst flashing

go to inj coding - under nissan and use the guys file he supplied, and write it. then dont start car, clear codes and try
if doesnt work, do same again and instead write back orig,
problem you got is ecm chain of command error its a headache but can be sorted,
I will try and let you know

Sent from my SM-A710F using Tapatalk

[pulsar2000]

please what do you mean by injector can coder;
thanks

what tool you lose codes with ? whilst flashing

go to inj coding - under nissan and use the guys file he supplied, and write it. then dont start car, clear codes and try
if doesnt work, do same again and instead write back orig,
problem you got is ecm chain of command error its a headache but can be sorted,

[pulsar2000]

important not to start and clear error i found then recover last time i had one fail then recoverd with kess recovery mode, different for you, tho as fgtech
worst case scenario manually recode using Consult or Launch, then clear code - its the ecm chain of command that wont allow start, then once started BDM that ecu,
as only real way to read and write without headaches

[Walid khalifa]

important not to start and clear error i found then recover last time i had one fail then recoverd with kess recovery mode, different for you, tho as fgtech
worst case scenario manually recode using Consult or Launch, then clear code - its the ecm chain of command that wont allow start, then once started BDM that ecu,
as only real way to read and write without headaches
Thanks for the info I will try and report .
I will write the eeprom with obd with key in place, erase fault then try to start the car .

Sent from my SM-A710F using Tapatalk

[pulsar2000]

Thanks for the info I will try and report .
I will write the eeprom with obd with key in place, erase fault then try to start the car .

Sent from my SM-A710F using Tapatalk

Eeprom NO- Flash you need to write

[Trojan001]

...........