PDA

View Full Version : Toyota Corolla virgin dump



Jur
11th November, 2014, 11:38 AM
Hi! have this problem.
ECU 89661-1A770
I didn't find any 8 pins in ecu,only driver 1251 Lucent.
I need swap ecu.What?
The car is equipped with only the old diagnostic connector 21 pin,not OBD.
I can not connect pin 13 to ground, as is the OBD for synchronization IMMO.
Immo have 93lc66 and 1 black key tiris 14 96 3D 03

ngakson2002
11th November, 2014, 03:14 PM
[QUOTE=Jur;2415665]Hi! have this problem.
ECU 89661-1A770
I didn't find any 8 pins in ecu,only driver 1251 Lucent.
I need swap ecu.What?
The car is equipped with only the old diagnostic connector 21 pin,not OBD.
I can not connect pin 13 to ground, as is the OBD for synchronization IMMO.
Immo have 93lc66 and 1 black key tiris 14 96 3D 03[/QUOTE

Hello,
Should be a serial eeprom in this ECU.Have checked both side of the ECU PCB .However, Bridge Terminal T1 and E1 for 30 minutes.

Regards

ngakson2002
11th November, 2014, 03:22 PM
..................................................

Jur
11th November, 2014, 05:11 PM
No 8 pins serial eeprom on booth and front side

doolittle
11th November, 2014, 06:38 PM
sorry read that wrong

Jur
12th November, 2014, 09:36 AM
"Bridge Terminal TE1 and E1 for 30 minutes." problem not solved.
I need help :)

MrMike
16th November, 2014, 03:09 PM
This car you can swap ecu without problem, no need for sync, immo is controlled only by immo box
What is the problem with the car?