View Full Version : Peugeot 307 SID803 EGR off
Shmortz
11th November, 2014, 12:57 PM
I need proper EGR off solution for SID803, here is dump from micro
smt
11th November, 2014, 07:07 PM
your file with egr off,let your tool correct the check sum
Shmortz
12th November, 2014, 08:15 AM
thanks, I'll try and report!
Shmortz
12th November, 2014, 10:42 AM
your dump is not correct, it is a try to remove fap but without switch...
carmageddon
12th November, 2014, 10:58 AM
I need proper EGR off solution for SID803, here is dump from micro
hysteresis control : 55A80 and 55AA0, set to zero
smt
12th November, 2014, 11:34 AM
tested 100% only you need to correct checksum
Shmortz
12th November, 2014, 11:58 AM
hysteresis control : 55A80 and 55AA0, set to zero
only those 2 adresses or from first to last set to zero?
tested 100% only you need to correct checksum
I did FAP and EGR with more corrections suggested from another user and car is OK for now, chk is corrected with writing...
carmageddon
12th November, 2014, 12:33 PM
your first post dont say that you need dpf-fap off and i do only egr.
dpf-fap off only pm
Shmortz
12th November, 2014, 05:02 PM
Yes, this is true. Then it turned out that there are problems with FAP and found a way to remove both.
gilleone
21st November, 2016, 11:01 PM
Please , help me I need a full back up for a Peuugeot 307 2.0 Hdi with this features : HW:9655041480 ,SW:9655474580 .
Act Tuning
21st November, 2016, 11:12 PM
Post full info of the ecu,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.