PDA

View Full Version : mazda 626 diesel 2001 how to program



ARKAN
11th November, 2014, 04:56 PM
hello please can help me i have mazda 626 diesel 2000
how to program transponder key and what the number 8C or ID 13
and pin code
please advice
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=285621&stc=1

shortys shaker
11th November, 2014, 07:48 PM
pin code 66747642

8c chip manual programming with pin code

ARKAN
12th November, 2014, 08:54 AM
thanx . please how to program manual tell me please
thanx foe advice

shortys shaker
12th November, 2014, 10:39 AM
http://adusa.us/data/documents/13.14_Manual_MAZDA-P.467-490.pdf

ARKAN
12th November, 2014, 04:37 PM
thanx for every thing but the car not work . please can help me need imo off
please advice
thanx

shortys shaker
12th November, 2014, 07:49 PM
never done one? dont think its possible

tmkz
12th November, 2014, 07:58 PM
Example Codeword: 23******
Using a virgin key:


Turn the ignition ON and OFF 5 times quickly, leaving it off on the last turn (on later vehicles, 2000MY onwards, do not turn the ignition on and off- merely insert and remove the key from the ignition barrel)


The warning light will be flashing at 1.2 second intervals


Turn the ignition ON when the light is out and wait for the light to flash twice then turn the ignition OFF






Again turn the ignition ON when the light is off and wait for it to flash three times.


Turn ignition back OFF and repeat for the subsequent numbers of the code


When the last digit of the code is entered, the warning light will be on solid with the ignition OFF - turn the ignition ON and wait for the light to go out, repeat with new additional keys




NOTE: If you have entered the code correctly the security light will stop flashing and stay on.


NOTE: Failure to enter programming mode is caused by incorrect transponder chips and incorrect programming procedures or by not using a virgin key




immo OFF not possible !

tmkz
12th November, 2014, 08:05 PM
this MAZDA is transponder ID 33 ! :)

Mazda 626 ? TEMIC 12, not 13.

ARKAN
15th November, 2014, 11:37 AM
please i have problem in imo if any one help me need imo off ....................................

tmkz
15th November, 2014, 01:58 PM
immo off not possible.

must code transponder from eeprom (ecu,immobox)
use TANGO TRANSPONDER PROGRAMMER

okura
15th November, 2014, 07:36 PM
only with emulator possible make immo off

totalkey
15th November, 2014, 09:43 PM
This is 8c id


iPhone Tapatalk