Milicija
13th November, 2014, 09:17 AM
Hello, I have Jaguar XF 2008 which needs new instrument cluster. I have changed used one, but the immo is blocking the car...
In the instrument cluster there is an EEPROM ST24C64, also MAC7131 MCU. I have tried to change the EEPROM, but no luck, instrument cluster wont even light... (I soldered good, both clusters do the same with different EEPROM).
I have red both instrument cluster EEPROMS, tried chaning only VIN number, but no luck.
Old dash is VISTEON PWB15123 VP8X2F-14A608-AB and the new one is VISTEON PWB16398 VP8X2F-14A608-AC.
I was wondering if someone could tell me what I could only change in new EEPROM dump that the IMMO would accept. Or IMMO information is stored in MAC7131?
I attach old and new instrument cluster dumps:
285854285855 (I attached the new dash dump with VIN changed...)
In the instrument cluster there is an EEPROM ST24C64, also MAC7131 MCU. I have tried to change the EEPROM, but no luck, instrument cluster wont even light... (I soldered good, both clusters do the same with different EEPROM).
I have red both instrument cluster EEPROMS, tried chaning only VIN number, but no luck.
Old dash is VISTEON PWB15123 VP8X2F-14A608-AB and the new one is VISTEON PWB16398 VP8X2F-14A608-AC.
I was wondering if someone could tell me what I could only change in new EEPROM dump that the IMMO would accept. Or IMMO information is stored in MAC7131?
I attach old and new instrument cluster dumps:
285854285855 (I attached the new dash dump with VIN changed...)