Audi A3 8L Magneti Marelli Jaeger to VDO swap

[Diagi]

Hello. There is a problem with keys erasing in new VDO cluster during adaptation. So I decided maybe to copy the vehicle data from MM/Jaeger cluster to VDO cluster. Is there such a possibility?

[borutkoz]

That is not possible. You only need a new id48 transponder and you will be able to adapt key.
If its possible you could also get from the car that you got the cluster the transponders.

[Diagi]

The most interesting thing is that earlier I have made such a conversion from Jaeger to VDO in A3 8L and A4 B5 without any problems and with the same transponders...

[borutkoz]

Dont really know why but some will go and some not without new transonders.
Did some conversion myself.

[yugo45]

Your problem is that you have VDO Immo2 and MM immo 3 . Not possible to do this.

[Diagi]

That's right, I've allready discovered that, thank you.

[Diagi]

Can someone please put the PIN out from Jaeger dump from my first post?

[yugo45]

Pin = 02868

[budaimark]

I have a '02 A3 with Jaeger (8L0920900L) cluster. I have replaced it once, but bought another bad one, so i would like to swap it. I wrote off earlier the immo from ecu. I have tried with 8L0919860e VDO cluster, but the backlights blinking, speedometer showing too high speed againist the real speed, when im driving, the coolant temp display won't works, and abs and srs check always lights.
Can i take it to work, or the only thing i can do is forget this project?
Thanks!

[evgeny87]

vdo cluster you installed is wrong, you must buy 8L0 920 ... .

[AudiS4]

vdo cluster you installed is wrong, you must buy 8L0 920 ... .

Correct XXX 919 XXX dash does not support canbus needs to be a 920.

[kiszka]

Hello. There is a problem with keys erasing in new VDO cluster during adaptation. So I decided maybe to copy the vehicle data from MM/Jaeger cluster to VDO cluster. Is there such a possibility?
there is such a possibility if I understood you correctly

[Elvin861]

Merry Christmas and Happy New Year!


I have a question about an old Audi A3 1.6 2003, I can no longer use my instrument cluster and after a long time I finally found a VDO but unfortunately I have the immobilizer off and now I can't set the new speedometer, the engine light doesn't light up first contact with the key and epc I also tried to code I get an error. Here are some pictures. Do I have to turn it on again so that the new speedometer works? With vcds diagnosis 17 combination test I get the engine light on. Why not with key my old speedometer jeager 8l0920900n new speedometer 8l0920900c vdo please help what do I have to do to get it working