PDA

View Full Version : Suzuku swift key prog



wzsola
14th November, 2014, 06:20 PM
Hi,
Anybody please add key to immo box dump. I read the key with zed-bull, but I can't make the new dump.
Thank you.

labase
15th November, 2014, 11:17 AM
Hi,
your dump is bad reading, read again.

wzsola
15th November, 2014, 12:04 PM
Hi,
My zed-bull recognise this dump. It's suzuki swift 2000. No key stored.
Thank you.

gwee
15th November, 2014, 01:37 PM
key added.........

wzsola
15th November, 2014, 02:02 PM
Hi,
Sorry, the engine didn't start. The engine lamp flash. I try add key, zed-bull shows it's correkt, but whitout success. Please check this.
Any advice? Thank you. Immo box: 33970-60G03

gwee
15th November, 2014, 02:54 PM
try again..........

wzsola
15th November, 2014, 03:19 PM
Hi,
No work. I check the zed-bul, transponder error.

wzsola
15th November, 2014, 08:14 PM
Hi,
Anyone have a good pair dump this immo and ecu?
Thank you.

ngakson2002
15th November, 2014, 08:31 PM
Hi,
Anyone have a good pair dump this immo and ecu?
Thank you.


Hello Mate,

Test dump attached.If not working you may have lost of Synchro between Engine ECU and immobox.Read ECU dump and post here.

Regards

wzsola
15th November, 2014, 09:48 PM
Hi,
Pass please. Thank you.

Bllinda
16th November, 2014, 12:39 PM
try and write back.

wzsola
18th November, 2014, 05:57 PM
Hi,
Problem is solved. I removed the ecu eeprom (TC97101P), the engine is start.
Thank you mate.