PDA

View Full Version : cheek sum erroooooooor



aslamaslam
16th November, 2014, 09:08 PM
hi to all
kia pride 2007 edc16c39

i read this ecu by kess obd and fvdi

i write the org file to other ecu with the same device the check lamp engin off and the car didnot run



please i need correct this dump 286351286352

daniel guerra
16th November, 2014, 09:13 PM
And what about the immo on the other ECU, is off? Have you read it by bdm?

bajad
16th November, 2014, 09:26 PM
chs is correct in both files

daniel guerra
17th November, 2014, 01:08 AM
The problem that he is expecting, is that he tried to use another ECU on this car, without complete BDM or IMMO offf, he will not be able to start the car, this is my interpretation of his problems.

gezame
17th November, 2014, 03:02 AM
Hi
You have write partial file incorrect (other ecu) in ecu.
You need bdm read damaged file in ecu, and restore partial read in complete bdm file.

aslamaslam
17th November, 2014, 06:21 AM
Hi
You have write partial file incorrect (other ecu) in ecu.
You need bdm read damaged file in ecu, and restore partial read in complete bdm file.
but i read full bdm
i hope to make sure if my file it is correct or damage
and What is the correct way to writing

bajad
17th November, 2014, 08:25 AM
if you read full BDM from old ECU then you need write this full BDM to the new ECU ,

jakkeviet
17th November, 2014, 03:34 PM
your read is not perfect it is full data whitout eeprom (immo)

gezame
18th November, 2014, 02:26 AM
your read is not perfect it is full data whitout eeprom (immo)

Hi
You are wrong, both read not BDM read, only obd read (parcial read flash).
Do not full data flash
Br.

jakkeviet
18th November, 2014, 05:02 AM
Hi
You are wrong, both read not BDM read, only obd read (parcial read flash).
Do not full data flash
Br.
This is exactly what I meant. if that data to write immo etc ... is gone. only the tuning of the fields have been read
YOU NEED FULL BDM READ

daniel guerra
18th November, 2014, 11:06 AM
That's what i said from the beginning, he needs the full BDM to write on the new ECU, if IMMO is off on the new ECU he will have no problems, but it seems it's not the case.

aslamaslam
18th November, 2014, 07:02 PM
you can gave me immo off of this ecu?

daniel guerra
19th November, 2014, 12:38 AM
You've to post your BDM files, and than me or someone else will try to help.

aslamaslam
19th November, 2014, 03:57 PM
You've to post your BDM files, and than me or someone else will try to help.



hi
I brought used ecu all ok lamp chek on . no fault code Except immo on
i read flash by x prog 286868
please
Make sure the file it is ok
and send me immo off
best regards

jakkeviet
19th November, 2014, 04:20 PM
hi
I brought used ecu all ok lamp chek on . no fault code Except immo on
i read flash by x prog 286868
please
Make sure the file it is ok
and send me immo off
best regards
you need read immo dump file (eeprom 95640) if you no have bdm

baltazar3
19th November, 2014, 05:36 PM
hi
I brought used ecu all ok lamp chek on . no fault code Except immo on
i read flash by x prog 286868
please
Make sure the file it is ok
and send me immo off
best regards

You have to open ECU,find and desolder eprom 95640,read and post here.

aslamaslam
19th November, 2014, 06:47 PM
You have to open ECU,find and desolder eprom 95640,read and post here.

95320
286895

aslamaslam
19th November, 2014, 07:21 PM
hallow to all
I have Kia prade 2007 diesel 1.5 litre with damaged ecu I I brought an other edc16c39 ecu I need to program full flash and eeprom

original ecu
Bosch 0 281 014 807
Kia Part No. 39100-2a610
and there is an other part No on ecu 39155-4A455

this ecu is without immo
i buy 3 ecu edc16c39 i tested this in the car the car run 1 second and turn off(the lamp check on) ..and

if I write the flash the lamp chek engin off I want to know why؟
I want a safe method for programming this flash i have bdm100.k tag kess v2. mpps. gallito v53 ....Tried to writefor all deves
i think immo in flash?
please i need full bdm or immo off to star this car

jakkeviet
19th November, 2014, 08:41 PM
change old eeprom you can use it

aslamaslam
19th November, 2014, 08:43 PM
i change it
Nothing new؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟

jakkeviet
19th November, 2014, 11:41 PM
and now write program

aslamaslam
20th November, 2014, 10:44 AM
Hi
You are wrong, both read not BDM read, only obd read (parcial read flash).
Do not full data flash
Br.
i post new flash i can not post the eprom because i change it

aslamaslam
20th November, 2014, 02:55 PM
any helpppppppppppppppppppppppppppppppppppppppp

gezame
21st November, 2014, 12:34 AM
Hi
At the ecu, I dont know immo-off.
As I said above, you only need to read the file (bdm) in ecu damaged, and restore bdm file with file obd-read.
That's the whole problem, not need another ecu, its original ecu can be recovered, obd writing no damage eeprom, only damage the flash file completely, but can be restored.






Deshacer cambios