Grand Caravan 2014

[hcip]

Anybody has info about mileage location of Grand Caravan 2014 year?
TiA

[XmoDDeR]

i did same as 2012

[hcip]

Anybody can change this to zero
original 416miles
dump attached
Thanks

[156alfa]

Hello Friend
Here is your file test
as 0 miles I do not think you know what you will see
try and report
Greetings from Italy

[hoangtu]

try this sister! :)

[hcip]

Thanks but your filies both give an error in display, already tried it before I post

I also tried to fill 0000's from line 200h to line 280h just give me 50miles on display

[hcip]

Many thanks for trying a help

Already sorted the problem, there is a checksum for this dump
Location of mileage is correct but need to calculate also the checksum to display the correct mileage

The only problem is a wrong word in display je je je.... "1miles" instead of "1mile"

[XmoDDeR]

1 miles ...lol What chip was it i have only dont the 2012-14 obd , i gues a new script will be made by her grace soon :) . can the mile/miles be corrected i know some cars say 0 miles

[hcip]

ha ha ha... its has an Atmel24C16 mate

and ist bloody to take out the meter... need to remove the whole Dashboard,
its harder to take than the range rover 2003

[claudio35]

Pardon my ignorance, for this vehicle, as the checksum is calculated?

[XmoDDeR]

ha ha ha... its has an Atmel24C16 mate

and ist bloody to take out the meter... need to remove the whole Dashboard,
its harder to take than the range rover 2003
haha SO i GUESS A SCRIPT is only for the die hard as most would chose OBD programming

[hcip]

Pardon my ignorance, for this vehicle, as the checksum is calculated?

The codes in address 0028Dh to 00293h if you change wrong the "ERROR" appear in dash
but if you will not touch the upper mileage address (from address 00214h to 0024C) you can change the checksum address and not displaying ERROR but the mileage doesnt change
if you will not change the codes in 0028Dh to 00293h and you change address 00214h to 0024C the lower value displayed in dash is 50 miles and the higher value will be about 4000miles, I stuck about 3 hours to study the codes of this car, very lucky that the meter can power up on the bench

[hcip]

haha SO i GUESS A SCRIPT is only for the die hard as most would chose OBD programming

what tool did you use for this that can access from OBDII? the dash is very pain to remove, to much job...and cannot do this car as other did here for about 20usd price charged....

[digimile]

hi
smelecom works....and one horn sound come and u done....thanks

[XmoDDeR]

what tool did you use for this that can access from OBDII? the dash is very pain to remove, to much job...and cannot do this car as other did here for about 20usd price charged....

i used smelecom , it was done fast and then SRI and finish job

[hcip]

i used smelecom , it was done fast and then SRI and finish job

So I need to buy smelecom so that I can charge it for 10usd.....:banghead:

[XmoDDeR]

well jprog does too, and dp3 i think fvdi i didnt check yet

[starmobile]

Hi DK,check from Codecard(Chrysler, Dodge, Jeep CANTOOL for dashboards and immoblisers) thanks.Chrysler, Dodge, Jeep CANTOOL for dashboards and immoblisers (http://www.codecard.lt/dash/chrysler-dodge-jeep-cantool-for-dashboards-and-immoblisers/prod_761.html)

[XmoDDeR]

CANTOOL NO SUPPORT FOR THER 2014 SPOKE TO MAKER AND HE SAID NO SUPPORT UNKNOWN

[cklair]

I have done one 2014 caravan with original avdi.

[buga37]

well jprog does too, and dp3 i think fvdi i didnt check yet
i have tried 2014 Grand caravan with Digiprog 3, it shows wrong mileage, didn't take chance to change it

[XmoDDeR]

i have tried 2014 Grand caravan with Digiprog 3, it shows wrong mileage, didn't take chance to change it

GOOD CHOICE WRONG MILEAGE EITHER WRONG ALGO OR WRONG LOCATION