PDA

View Full Version : Opel Denso DPF fault



Pzolee
18th November, 2014, 05:38 PM
Hello.

I have a problem with a A17DTJ Opel. I flashed a file with an EU clone piasini (sh7058 ), switched off DPF ( swiftec). But I get an error P1602-48 : reprogramming or replace engine ecu?
How can i solve this? What I'm doing wrong?
Please check and modiy checksum.
Thanks for every help :)

atomiczen
19th November, 2014, 01:57 AM
post your file, seems bad checksum in writing
try to flash again ori dump

Music73
19th November, 2014, 10:00 AM
I know this seems like a stupid question but did you check the chip in the ecu...

The reason i ask is because i did a similar thing... i read mine as a 2010 on as the car was a 2012 so had a file that was 1.5mb but when i actually looked at the chip it was a -2010 (type 7508 i think instead of a 7509) and i only realized after i had erased the chip luckily i was able to cut the file down to 1mb as it just repeated the read for the other .5mb

Pzolee
19th November, 2014, 10:15 AM
check mcu...sh7058.
Piasini read sh7058.

Pzolee
19th November, 2014, 10:20 AM
post your file, seems bad checksum in writing
try to flash again ori dump


With the original dump car is ok.

atomiczen
19th November, 2014, 07:11 PM
AU15NCLZQ60J software
try to flash it with ktag