bmw e60 cluster problem

[vlado kljucar]

Hello friend does any one have same problem with car like this. Bmw e60 2006 year, when start car needles normal goes up but then all needles are frozen and stay on same place, I drive car nothing still frozen no moving, On diagnostic there is no faulty anywhere...Thanks and any idea will be very helpfull...

[tech_cz]

Did you tried Dashboard Test No.:2 ?

[vlado kljucar]

yes my friend on test work all fine , Im confused...

[donkez]

Had one with bad soldering on 35080 eeprom, someone did mileage on it. All I had to do is to resolder.

[ahsan khan]

Hi mate gauge gone bad so replace or repair it

[electronicservicemate]

I have same problem with this dash, solve it by desolder procesor bad contact on it use flux and hot air, for me that work great

[andrym3]

Check short circuit in pin of MCU but not bad contact

[electronicservicemate]

BAD CONTACT IN MY DASH!!

[vlado kljucar]

ok friends thanks all for answer, i will try , now i remove cluster and i will report , thanks again for all!!

[vlado kljucar]

nothing i try everything solder, change cluster and on other cluster same situation, Think problem is somewhere on comunication...

[MACKIE]

Did you check TCU ?

Regards
Mackie