'05 KIA RIO - Adding key data manually

[estate]

I've got a 2005 1.3 Kia Rio that for some reason my SBB will not write. I only have an early demo version of EFFI ( i had tried to buy the full version but cannot get a response :( ). How can i add this key manually? All help greatly received :)

[autochei]

buy another sbb u easy to add key

[estate]

My SBB has no issues with 100's of cars though?

[szkeptmen]

Look this:

http://www.digital-kaos.co.uk/forums/f177/chevrolet-daewoo-kalos-big-trouble-after-t300-393576/index2.html

Interesting, I think...

[keysph]

What pincode are you using?

[siyadk]

can u post immo pic?

[Recoder]

Hi there Did one of these yesterday .
Used SBB kept trying but immo light flashed after procedure non starter.

Did notice that sbb said turn to Start in procedure which vehicle did ?.
Turned off vehicle immo on again (used Glass ID60 and ceramic ?) .
Had to get car out of compound before another nights storage so Started vehicle while connected to SBB then disconnected it .
told owner to driver vehicle home and i would invetigate.
After 2 mile drive turned vehicle off (Batt was Dead which it was when i started )So used jump box again and it staretd and ran fine tried it 10 times all ok ?/?.
HTH .
P.S vehicle didnt ask for pincode just horn beeps etc as i was trying to program it ?.

[keysph]

T300 dose them better and smooth.

[estate]

Recoder this is exactly what is happening to me! Car will start and run during sbb coding, but as soon as you stop it then won't restart............

[estate]

double post.

[Recoder]

Did it say maximum keys 2 ????
Think this maybe a error ?
Should be minimum 2 keys.
I/e switch to start for 5 seconds then off for 5 seconds each key????.
It ended up on a Glass t7 id60.
but i did try it with ceramic id60 also so maybe why it started in the end (2Chips in).
HTH

[estate]

got 2 keys here, will try cycling both keys when asked, both are glass Id60's so will try that :)

[Recoder]

it Will go on Id 60 t7 glass as mine is on its way to the docks with a very happy customer on a t7.

Im sure thats an error maximum of 2 keys on the SBB screen should be 2 keys min i think.
Worth a try mate .
If not get it running on SBB unplug while still running and leave for 30mins and then see?.

Let us know how it goes.

Regards Recoder

[estate]

Will get to it over the weekend. Thank you for the input :)

[Recoder]

A pleasure mate just hope it works for you .
I havr had some weird jobs lately the one you expect to go ok dont l.o.l

[estate]

2x Keys, both with glass id60's, as you suggested. Perfect! job done in less than a minute. Thank you Recoder.

[Recoder]

Its a pleasure mate glad it sorted it out for you .
i thought it was a typo on the SBB as it got comm,s ok and done most of it l.o.l.

[estate]

when i did it with one key, i found if i started the car during programming, it would start fine........ was convinced there was an immo issue.....

[doolittle]

using the sbb on a Rio had the same problems. Key only when in when I started the car during programing.
Engine managment light came on but left after a battery reset.

[Recoder]

I also did a getz a few weeks back absolute doddle .

Had to pass a Suzuki wagon r yesterday .
Went to it thursday spare key no go Sbb T300 AD100 no go .
Sent job back to Shop who passed job on to me first and we tried MVP pro even had Hickleys on the phone as well .
Failed tried everything ~~~~~even swore at it l.o.lalso it nicked a couple of his tokens too.

[estate]

are they not vx based immo 2? coil around ign barrel? read tms?

[Recoder]

Tried them under Vaux also mate still no go.