2007 toyota camry remote programming

[totalkey]

http://www.keyobd2.com/media/catalog/product/cache/1/thumbnail/56x/9df78eab33525d08d6e5fb8d27136e95/3/_/3_buttons_remote_key_japan_314_4mhz_4d-67_chip_for_toyota_camry_japan_hongkong_south-east_asia_taiwan_market_3524193_a_8.jpg
i try all manual way but couldn't success to enter the car to a programming mode
any advice please?
do i need master key or valet is ok?
do i need to do diagnostic way?
thanks

[wd bau]

hi
i think u should use OBD2 device to program this type of remote.

[totalkey]

any other advice?

[wd bau]

hi
i use SBB original , but u can try ad100 pro ,sbb clone or skp900 ,x100 ...etc

[Automat]

Not sure of your market, but SBB works on USA.

[malczykos]

You can program remote by SBB. I used this tool couple of times for program of USA Toyota like Camry RAV-4.

[PCF]

u can program the remote using x100 its so easy and fast

[Siham]

Try to lock and unlock one more time after you finished the regular procedure , sometime it work for chinese remote for manual remote programing.

Good Luck!

[philipcoin]

Close all doors and press the lock to lock all doors,
Unlock only the driver side door and open the door.
And plug your machine to the obd2 start programming finish.

I use SBB clone and CK100 both can do the programming.