PDA

View Full Version : Experience with Galletto 1250/1260 Tool!



Pages : [1] 2

vevepatronu
9th July, 2009, 04:59 PM
Hello to everyone,
I created this thread because i saw that on the internet there are several types of galletto tools. I want you people to share the information you have regarding this tools and also what type do you have (can also attach a photo) because the pcb's are diffrent from one to another.

Now i'll post some information about my tool that i bought it from china and it seems that doesn't do what it should...

I have a Dacia Logan that have Ecu Sirius 32 with flash 29f200BB, according to the galletto tool this should work, but when i try to connect it tells me Error Send Wake!

I'll attach here a picture of the pcb, it is galletto 1260 with the pcb that has a bicolor led.

Please share your experiences with me...

metsat
11th July, 2009, 12:36 AM
Do you have a clearer picture? . I think, galletto1250 not like this??

vevepatronu
11th July, 2009, 12:12 PM
Do you have a clearer picture? . I think, galletto1250 not like this??

i'll try to make one on monday... this is a galletto 1260, but i think are 2 different models of galletto 1260...

metsat
11th July, 2009, 06:10 PM
i'll try to make one on monday... this is a galletto 1260, but i think are 2 different models of galletto 1260...

ok. if, do you have mprog 2.8 software for fti232. You can read this program. is eeprom 93c46 or 93c56?

vevepatronu
11th July, 2009, 08:54 PM
ok. if, do you have mprog 2.8 software for fti232. You can read this program. is eeprom 93c46 or 93c56?

i'll reply on monday or tuesday my friend with all the details and the dump so please keep an eye on this thread. thanks for understanding.

Ciochy
22nd July, 2009, 08:06 AM
hello also have a galletto 1260 and a Dacia Logan and also i can't read the ecu ... cand some one give me some info about this problem ?

Steve L
22nd July, 2009, 09:44 AM
There is no specific DLL file for the Dacia cars, you will need to clearly indentify the ECU and try one of the DLL files from another maker which uses the same ECU model. This might work

vevepatronu
22nd July, 2009, 06:56 PM
There is no specific DLL file for the Dacia cars, you will need to clearly indentify the ECU and try one of the DLL files from another maker which uses the same ECU model. This might work

yes my friend i understand but the problem is the interface not the software because there are more types of the same interface... i'll try to post the pictures today of my interface.... i allready ordered another type and i am wayting to receive it. please post what type do you have!


Here are the photos :

vevepatronu
30th July, 2009, 06:26 PM
There is no specific DLL file for the Dacia cars, you will need to clearly indentify the ECU and try one of the DLL files from another maker which uses the same ECU model. This might work

hey m8 here is some pictures from the second galletto tool that i have, and this one can be modified and it can work with sirius 32 ecus.... will attach the pictures here so you can see the differences.
This 2 galletto tools does not work with sirius 32 because it doesn't have the L-line connected which it is used to wake the ecu, and that's why the error that gives galletto it is "Error send wake". If you have any ideea on how to modify it please let me know... thanks!

youssef70
31st July, 2009, 12:24 AM
may be that help

Chadder
31st July, 2009, 12:45 AM
hey m8 here is some pictures from the second galletto tool that i have, and this one can be modified and it can work with sirius 32 ecus.... will attach the pictures here so you can see the differences.
This 2 galletto tools does not work with sirius 32 because it doesn't have the L-line connected which it is used to wake the ecu, and that's why the error that gives galletto it is "Error send wake". If you have any ideea on how to modify it please let me know... thanks!


Spot on buddy .

multitek
8th August, 2009, 01:38 PM
hey m8 here is some pictures from the second galletto tool that i have, and this one can be modified and it can work with sirius 32 ecus.... will attach the pictures here so you can see the differences.
This 2 galletto tools does not work with sirius 32 because it doesn't have the L-line connected which it is used to wake the ecu, and that's why the error that gives galletto it is "Error send wake". If you have any ideea on how to modify it please let me know... thanks!

my galletto 1260version has L-line but also can't read sirius32 by obd,why?

electronics
19th August, 2009, 05:06 AM
Hello I think galletto doesn`t work with sirius :(

ggpanos
10th September, 2009, 04:29 AM
:stupido:
my galletto 1260version has L-line but also can't read sirius32 by obd,why?

I have the same problem. I have Galetto 1250 & 1260 both with K,L line. I have also boot the MCU of the ECU but nothing! I thing that ECU must be on the car and must have working immo as well ( or ECU to be virgine!) in order to R/W

danhans115
10th September, 2009, 11:21 AM
Does the ECU not need putting into boot mode?

I had similar errors reading my Stilo Abarth initially, had to ground a pin on the ECU to force it into boot mode to make a dump of the flash.

Im no expert but looking around at the various flash tools none of them seem to use the L line, this is usually just for sending the wake-up for diagnostic sessions.

tirlibibi
10th September, 2009, 11:36 AM
I think version 1260 is only a joke to make people think there is a new version and buy it !

If you compare Gallette 1250 and 1260 exe, the only difference is the FTDI Hardware ID Key ! and the vista driver for ftdi in the galletto dir !

Dreamer
23rd September, 2009, 12:40 PM
hello....!!!!

"Hello" and "thanks" posts get deleted as they are not relevant to the thread. Please make an intorduction post in the intorductions section. If you are not sure how to do that then click the link in blue below and read the guide.
http://www.digital-kaos.co.uk/forums/f2/new-forums-how-make-your-first-post-couple-other-helpful-tips-30279/

luis_sanchez_sanchez
23rd September, 2009, 01:33 PM
Hello I can confirm there is no diference between the hardware of galletto v1250 and v1260. At least I will expose how I get that conclusion.

The only differences is the software. It has been improved to manage more ecu's.

My experience.... I bought a galletto v1260 clone. It came with its software (patched NEW_SERIAL.exe v1260). At first I connected every thing but I did not work at all. What I did is to get FT_PROG form FTDI usb-serial converter (which is the chip used for usb to serial converter). At the same time I got (I do not remember where), the configuration file for FTDI galletto v1250, and I notice the info inside where the same as mine. Also I had the original galletto software v1260 and I try to use with the cloned cable, I did not work.

After that, I debug the new_serial.exe with IDA PRO, and I notice that after listing the FTDI devices, It gets the ID STRING of the ftdi chip (stored at EEPROM), and it compares with "47514789". What I did then, was to write that string to ftdi chip by using the FT_PROG.EXE. EUREKA.......!!!!!! Now the cloned hardware was comunincating with NEW_SERIAL.exe galletto.

After that, I did the same with the original Galletto v1260 software. Than I got the ID STRING was "73945120". EUREKA....!!! original sotware working with cloned hardware.

Finally, I compared the v1250 configuration file I got from internet with v1260 which I have working with the original software. Then ID STRING "73945110" very similas to v1260 but diferent.

Conclusion:

Origianl Galletto v1250 -> ID STRING "73945110"
Origianl Galletto v1250 -> ID STRING "73945120"
New_Serial.exe v1260 -> ID STRING "47514789"


I hope it will be usefull for somebody....!!!

luis_sanchez_sanchez
23rd September, 2009, 01:36 PM
Sorry.....!!!!!

These are the good ones:

Original Galletto v1250 -> ID STRING "73945110"
Original Galletto v1260 -> ID STRING "73945120"
New_Serial.exe v1260 -> ID STRING "47514789"

mmc83
5th October, 2009, 02:27 PM
you need a special conector taht uses both K and L line for wake-up...I will try to find you a icture...I have one

Steve L
5th October, 2009, 07:53 PM
Sometimes with clone tools, the L line is not connected and you have to take them apart to link it in.

Another thing I have been told is that L line is from older ECUs, and that they don't always connect to the same pin in the OBD connector, whereas the K line connection is a standardised position in the OBD connector.

You could look at the wiring and check this.

OpenOBD
6th October, 2009, 07:28 AM
Galleto works with sirius , il try it myself

erikfrog
6th October, 2009, 12:04 PM
Galleto works with sirius , il try it myself
Which one, year model?

del635
12th October, 2009, 01:16 AM
When I bought my 1250 from a portugese ebay seller it promised in the advert 'improved l line hardware' but I only bought from him because of the software package he supplied. Ive no experience with sirius but some ecu require a wire to be added to the dlc from the ecu eg some edc16 vag, this is because they dont have a k line they communicate through can and galletto cant its k line only. If your making money from this I would recommend mpps tool, 1000 euro and has good support and coverage, not exactly robbery like some tools for what it does and I predict it could more expensive as coverage improves.

OpenOBD
12th October, 2009, 06:47 AM
@ erikfrog i use it on a clio 2003 1.6 16V

erikfrog
12th October, 2009, 07:59 AM
@ erikfrog i use it on a clio 2003 1.6 16V
Have you read complete flash with it?

OpenOBD
12th October, 2009, 08:03 AM
@erikfrog

Yes i read and flash it more times , it was sirius 32 or 34 i forget but 100% works ok. Dont worry

pokerfaced2k4
2nd November, 2009, 10:37 AM
Hi, do you have schematic for galletto 1250 clone, I need know the pin on the board thanks.

ipejasinovic
2nd November, 2009, 09:10 PM
Sorry.....!!!!!

These are the good ones:

Original Galletto v1250 -> ID STRING "73945110"
Original Galletto v1260 -> ID STRING "73945120"
New_Serial.exe v1260 -> ID STRING "47514789"

Can you upload original 1260 sw? How is protected?

zecas
2nd November, 2009, 10:41 PM
HI

if you look closly you will see that there are some drivers that are diferent from 1250 and 1260 also the 1260 opens in vista the 1250 not works in vista and xp sp3.

the L line is necessary for sirius ecu maby there are other ecu that requires this.

an good hardwrae should have (in my opinion) ft232rl + si9243 with k+l conected with transistores.

sometimes need to change pull resistor value

djcristi
28th November, 2009, 03:51 PM
this means that if we set that ID STRING to any cheap vag-com 409.1 kkl interface , it will work with galletto software?

HsamehH
30th November, 2009, 06:37 AM
does anyone knows how to connect L line to galletto 1260 ?

tordu
30th November, 2009, 04:25 PM
this means that if we set that ID STRING to any cheap vag-com 409.1 kkl interface , it will work with galletto software?

I'm thinking too, if you try let us know

tmario
1st December, 2009, 08:57 PM
Hi , if someone knows where I can find
MPPS software

Thanks

djcristi
10th December, 2009, 11:29 AM
this means that if we set that ID STRING to any cheap vag-com 409.1 kkl interface , it will work with galletto software?

first, the vag com interfaces are based on ft232bm, which doesn't have attached an external eeprom, so you have to modify it.

one vag com interface si 12$ and galletto is 25$ . so there's not big difference.

but the problem with the galletto is that it don't work as the vag com interface for diagnostic, i think because it doesn't have the l-line connected.

alin6
28th December, 2009, 06:35 PM
Hi guys,

I get galletto error when I try to read ecu data from my car (Vw passat 1.9). I just bought a galletto 1260 clone.
Can someone please help me?
Thanks.

djcristi
28th December, 2009, 07:08 PM
maybe you haven't selected the wright driver

alin6
28th December, 2009, 07:19 PM
maybe you haven't selected the wright driver


Maybe...
I've copied the cd content on my computer and then run new serial.exe. Ecu data is read but at 100% I get the error and the file isn't saved.
Is there anything that need to be installed before first run?

Thanks

djcristi
28th December, 2009, 08:27 PM
nope, you installed ok, maybe your windows directory path is too long or has strange chars and the program can't write the file. try copying the software closer to the root of one drive and run from there.

valymad
29th December, 2009, 08:54 PM
Maybe...
I've copied the cd content on my computer and then run new serial.exe. Ecu data is read but at 100% I get the error and the file isn't saved.
Is there anything that need to be installed before first run?

Thanks


did you remove the instrument cluster fuse?
To read/write some VAG cars you need to remove that fuse,i don't remeber the number i think is 12.

youk
30th December, 2009, 08:32 AM
Index of /temp (http://myrezo.free.fr/temp/)

iustin73
5th January, 2010, 09:22 PM
hello everybody need help my ft232bm is writed with one ept and it give to me "this clone is not permited" how to fix?

cosmind
6th January, 2010, 07:32 PM
2 pics with different Galletto.
one is compatible with the Dacia Logan and one is not

djcristi
7th January, 2010, 03:25 AM
can you tell us where did you bought them?

the only problem with logan are the petrol ones, which have Siemens ECU , and they need L-line for wakeup. Not all Gallettos have L-line connected.

Givik
7th January, 2010, 10:02 PM
The same trouble.
Recently I've received Galletto 1260, based on FT232RL and with L-Line connected. But it can't connect with Logan, giving me "ERROR SEND WAKE"...
Photos attached (I also tried to connect K and L directly, as shown on the pic, but no result).

cosmind
8th January, 2010, 12:11 AM
can you tell us where did you bought them?

the only problem with logan are the petrol ones, which have Siemens ECU , and they need L-line for wakeup. Not all Gallettos have L-line connected.

I bought it from someone in Romania last year. I do not have his contact details.
I suppose he bought it all from China

cosmind
11th January, 2010, 06:39 PM
@erikfrog

Yes i read and flash it more times , it was sirius 32 or 34 i forget but 100% works ok. Dont worry


hello,which galletto did u use for sirius ? as in picture 1, 2 or 3 ?

Givik
17th January, 2010, 10:08 AM
So, can anybody post a photo of Gal, which 100% works with Logan?

magnat
20th January, 2010, 09:46 PM
Hello, I have Galletto 1250 and i have the same problem with the reading of ecu... i tried to read ecu from Dacia Logan 1.4 MPI and for Renault Megan 1.9 dCI... and without result

cosmind
20th January, 2010, 10:17 PM
gallettto from 2end picture is not working on all Logan. few days ago I read a 1.4 mpi Logan but today I tried on another 1.4 mpi and not working

magnat
20th January, 2010, 10:27 PM
gallettto from 2end picture is not working on all Logan. few days ago I read a 1.4 mpi Logan but today I tried on another 1.4 mpi and not working

Because I'm new to this forum I can't view the picture... if you can send me the pics...

magnat
20th January, 2010, 10:42 PM
I looked in the interface and is the model http://www.digital-kaos.co.uk/forums/attachments/f68/9334d1263231397-experience-galletto-1250-1260-tool-06012010914.jpghttp://www.digital-kaos.co.uk/forums/I%20looked%20in%20the%20interface%20and%20is%20the %20model%20http://www.digital-kaos.co.uk/forums/attachments/f68/9334d1263231397-experience-galletto-1250-1260-tool-06012010914.jpg (http://www.digital-kaos.co.uk/forums/attachments/f68/9334d1263231397-experience-galletto-1250-1260-tool-06012010914.jpg)

paul_12345
24th January, 2010, 04:22 AM
anyone got a dump from a galletto *edit - no need found it

Givik
24th January, 2010, 07:56 PM
gallettto from 2end picture is not working on all Logan. few days ago I read a 1.4 mpi Logan but today I tried on another 1.4 mpi and not working
I improved my second Galletto clone and had success with Logan 1.6mpi. But today when I tried to read 1.4mpi, I had to try it many times (2 or 3) until successed.
So, next time try to connect again.

PS. Now I have some ideas what to fix in my chineese clone. I'll write if I have success with it.
PPS. Can U post the dump from your FT232R?

djcristi
24th January, 2010, 08:59 PM
I improved my second Galletto clone and had success with Logan 1.6mpi. But today when I tried to read 1.4mpi, I had to try it many times (2 or 3) until successed.
So, next time try to connect again.

PS. Now I have some ideas what to fix in my chineese clone. I'll write if I have success with it.
PPS. Can U post the dump from your FT232R?

ft_prog dump

ovix
2nd February, 2010, 11:08 PM
Because I'm new to this forum I can't view the picture... if you can send me the pics with galletto 1260 schematics and dumps?!

achourvcnsa
2nd February, 2010, 11:22 PM
hello everybody I am looking to buy a diagnostic connector multidiag please

ipejasinovic
4th February, 2010, 11:11 PM
Can someone upload original 1260 software?

youk
5th February, 2010, 01:02 PM
http://myrezo.free.fr/temp/SETUP_EOBD2_1260.rar

ipejasinovic
5th February, 2010, 04:16 PM
Nope, this is 1250...

vevepatronu
7th February, 2010, 05:59 PM
when you want to buy a galleto that works with Sirius32 just ask for one with pcb without LED and when you receive it, open it and connect inside L-line with K-line with a rezistor... or you can make it directly with a wire but it is safe with a rezistor....
now your Galletto will work on Sirius 32 :P

sl4ck
7th February, 2010, 07:22 PM
I improved my second Galletto clone and had success with Logan 1.6mpi. But today when I tried to read 1.4mpi, I had to try it many times (2 or 3) until successed.
So, next time try to connect again.

PS. Now I have some ideas what to fix in my chineese clone. I'll write if I have success with it.
PPS. Can U post the dump from your FT232R?

Did your improvement worked, or new solution ?
Plz share


when you want to buy a galleto that works with Sirius32 just ask for one with pcb without LED and when you receive it, open it and connect inside L-line with K-line with a rezistor... or you can make it directly with a wire but it is safe with a rezistor....
now your Galletto will work on Sirius 32 :P

what resistor m8 ?

vevepatronu
7th February, 2010, 07:57 PM
a 2kohm i think it is ok ...

sl4ck
7th February, 2010, 08:01 PM
So, we have to do something like this with a 2kohm resistor?

vevepatronu
7th February, 2010, 08:39 PM
So, we have to do something like this with a 2kohm resistor?


This solution only works on interface WITHOUT LED!!!

ducki
8th February, 2010, 03:39 PM
Hi all,


original from ipejasinovic
Nope, this is 1250...

this not correct. This Soft from youk works well with my Galletto 1260 clone from china. FTDI-Driver are better then driver from the cd.

I have found a solution for the Problem "changing speed error" .
The Adapter can not read the ECU Flash - only the ECU-ID!
The ECU must be in the car , ignation on, engine must not running. Then can read the adapter the flash from ECU.
If the ECU to take off from the car on my table, i can't read the flash :hmmmm2:
Why this is ??? Im*o:hmmmm2:

Thanks for a lot of tips here. There is a good forum.

ipejasinovic
8th February, 2010, 04:27 PM
^Nope. It's fake. If in original 1260 software, only thing changed is name from 1250 to 1260, then it's original.

And, if I remember well, original author of EOBD2 is F.lli Galletto, not youk...

So, I want original software...

ducki
8th February, 2010, 04:40 PM
^Nope. It's fake. If in original 1260 software, only thing changed is name from 1250 to 1260, then it's original.

And, if I remember well, original author of EOBD2 is F.lli Galletto, not youk...

So, I want original software...

Hi,

i can't understanding. Why works 1250 Soft with origin Drivers with my China clone well??
In the registry , driversection, is ftdi-driver for 47514789 (china clone) and not ID STRING 73945110 (orig. 1250) :hmmmm2:

Is not a problem for me. Adapter works well with this soft, with New_Serial.exe (Original for 1260 ??) i had problems. The original -CD was broken on delivery,- i'm locking for Soft in this forum. Now i had found this version. Just i've read the Flash 29f400 from my Fiat Ducato ECU EDC15 C7 0281011047.
Have a Question: I've read the Flash two times. Both Files have different Checksums! Why??

Sorry -
And, if I remember well, original author of EOBD2 is F.lli Galletto, not youk shure - youk is not the author!!!

greetz.

lupu_sandu
8th February, 2010, 04:45 PM
Between 1250 and 1260 (from China is not a single difference - may in bad for 1260) :))
Use galletto 1250.

Use this 2 files for reprogram interface using Mprog.

CyberKareca
8th February, 2010, 05:09 PM
Between 1250 and 1260 (from China is not a single difference - may in bad for 1260) :))
Use galletto 1250.

Use this 2 files for reprogram interface using Mprog.

Hi !
I've programmed the eeprom usng MProg 3.5 and the 1250.ept file, i'm using latest FTDI page drivers, and still it doesn't connect to a MCC Smart Fortow EDC15 ECU.
When i press the "ECU Data" button, it start's the reading process but after a while 10 or 15 secs i get an error "power off wait 10sec and try again"
I've tryed with original 1250 software, original 1260 and with clone NEW_SERIAL.exe .
The interface im using is a cloned without the "L Line" and without led.

Any solution ?
TIA

ipejasinovic
8th February, 2010, 05:13 PM
i can't understanding.
Extract this exe to your galletto install dir and run. Look closer at version. So, the question is: Fake or Original?!

ducki
8th February, 2010, 05:43 PM
I will trying. Thanks.

ducki
8th February, 2010, 06:43 PM
Between 1250 and 1260 (from China is not a single difference - may in bad for 1260) :))
Use galletto 1250.

Use this 2 files for reprogram interface using Mprog.

Why i'm should change the *.ept files in the FTDI-Chip? Adapter works well on USB-Port.
It's a china clone without L-line and with LED.
I have only problems, when i like read the nacked ECU on my table. Adapter weak up the ECU on K-line, i can read the ECU-ID. Thats all. Is the ECU in a car, i have not problems, i can read the flash.

any suggestions?

ducki
8th February, 2010, 06:56 PM
Extract this exe to your galletto install dir and run. Look closer at version. So, the question is: Fake or Original?!

Hi,

is the Version 1270 from you ? :hmmmm2:
Is works well - i can not find a difference to the other versions.

ipejasinovic
8th February, 2010, 07:34 PM
is the Version 1270 from you ? :hmmmm2:
Yes. Do you see now, what I mean when I said that 1260 posted by youk is fake.

So, I want REAL 1260, if exist, of course...

vevepatronu
8th February, 2010, 09:22 PM
here is the working and good Galletto 1250/1260 PCB you should have this is without LED!!! All other galletto doesn't work with Sirius32....

ducki
9th February, 2010, 02:46 PM
Yes. Do you see now, what I mean when I said that 1260 posted by youk is fake.

So, I want REAL 1260, if exist, of course...

o.k.
I'v understand. I'v tell with a tuner, any minutes ago, he says the same. 1260 ist the faked 1250 with another drivers.

cu

ducki
9th February, 2010, 02:49 PM
here is the working and good Galletto 1250/1260 PCB you should have this is without LED!!! All other galletto doesn't work with Sirius32....

Hi,
i'v ordered this adapter. Hope ,he will working well .

thanks.

youk
9th February, 2010, 03:55 PM
this is a 1260 version modified

ducki
9th February, 2010, 04:17 PM
yes, i know this. It's a different hardware from my own Galletto with LED. My Device works not so well. I will trying.

cu

ipejasinovic
9th February, 2010, 04:47 PM
This should be schematic of Galletto with working L line, but also has LED diodes...

Tommy123Tommy
9th February, 2010, 06:54 PM
There was never original version 1260 ever, it was complied by an ebay seller from europe.

also the cable without l-line and led is from vagproduct, if you cantact him ask for Ji and tell him damos send you.

you will pay about 30usd if contact on msn, he is also 100% reliable
here is web

vagtool vag-com keyless vag-can commander BMW CARSOFT SCANNER (http://www.vagproduct.com/)

the site is a little outdated but he is working on bigger progect now .

Tommy123Tommy
9th February, 2010, 06:54 PM
There was never original version 1260 ever, it was complied by an ebay seller from europe.

also the cable without l-line and led is from vagproduct, if you cantact him ask for Ji and tell him damos send you.

you will pay about 30usd if contact on msn, he is also 100% reliable
here is web

vagtool vag-com keyless vag-can commander BMW CARSOFT SCANNER (http://www.vagproduct.com/)

the site is a little outdated but he is working on bigger projects now .

swpugsport
9th February, 2010, 06:55 PM
I have just purchased one of these from ebay, 1260. It trying to get it read the map on my Bosch ME7.4.4 in a Saxo VTR 8v 2001, with no joy, reads the ECU ID but will stop at reading the Rom, any ideas?

paganini
10th February, 2010, 06:17 AM
I plan to buy this interface, and I wonder which do you recommend ?

busaman
10th February, 2010, 10:55 AM
I plan to buy this interface, and I wonder which do you recommend ?


yes which one is the best i have one ans internallly it looks sh1t i want to replace it.

vevepatronu
10th February, 2010, 11:36 AM
yes which one is the best i have one ans internallly it looks sh1t i want to replace it.


Look on post #77 m8, that is the one i have and works very well if you connect the L-line

busaman
10th February, 2010, 02:00 PM
Look on post #77 m8, that is the one i have and works very well if you connect the L-line

where did you get yours from.it looks much better than mine

hardwareman2k
10th February, 2010, 05:35 PM
Hello to everyone,
I created this thread because i saw that on the internet there are several types of galletto tools. I want you people to share the information you have regarding this tools and also what type do you have (can also attach a photo) because the pcb's are diffrent from one to another.

Now i'll post some information about my tool that i bought it from china and it seems that doesn't do what it should...

I have a Dacia Logan that have Ecu Sirius 32 with flash 29f200BB, according to the galletto tool this should work, but when i try to connect it tells me Error Send Wake!

I'll attach here a picture of the pcb, it is galletto 1260 with the pcb that has a bicolor led.

Please share your experiences with me...

why can i see images? what account do i need? is there country restriction romania?

vevepatronu
10th February, 2010, 06:06 PM
@hardwareman2k (http://www.digital-kaos.co.uk/forums/members/115903-hardwareman2k/) read the rules...

Tommy123Tommy
11th February, 2010, 12:29 AM
where did you get yours from.it looks much better than mine

look at post #84 , that is the best place you will get that cable as that is the manufacturer.

cosmind
11th February, 2010, 10:51 AM
are you sure?
how they connect? directly or using a resistor



here is the working and good Galletto 1250/1260 PCB you should have this is without LED!!! All other galletto doesn't work with Sirius32....

vevepatronu
11th February, 2010, 01:16 PM
are you sure?
how they connect? directly or using a resistor


read all the thread and you will find the solution...

stitch_mau
12th February, 2010, 12:49 PM
Does anyone knows if that new "cable" is SID 301 compatible ?Or only work in Sirius"n" from Siemens ECU brand.

In my cable , and when try to connect to car give me the "error send seed"

Regards

trigital
13th February, 2010, 12:47 PM
Anybody succeed to read Mercedes EDC16 (A-Klasse) with Galleto?
My hardware is like in the picture and has allready L-line connected.


Thanks!

e.t.
14th February, 2010, 08:18 PM
Hi,
One can re-tool the L-LINE by switches or otherwise somehow

flor
25th February, 2010, 10:32 AM
i hawe problems with galletto 1260 on my passat 2003 1.9 tdi pd . on read ecu at 100% mesage galletto error but the file is save . i open new file .. download .. receive mesage ok but nothing new on ecu. some help ..?

fleadepot
25th February, 2010, 12:43 PM
i hawe problems with galletto 1260 on my passat 2003 1.9 tdi pd . on read ecu at 100% mesage galletto error but the file is save . i open new file .. download .. receive mesage ok but nothing new on ecu. some help ..?

some vag cars require you to remove the instrument cluster fuses before you start with gallletto. have you tried that?

flor
25th February, 2010, 01:54 PM
some vag cars require you to remove the instrument cluster fuses before you start with gallletto. have you tried that?
i do same story:devil:

Flynk
26th February, 2010, 03:34 AM
I have one of those 1250 clones with the bi-color led, when I plug it into the car both leds (red and green) are "on" giving an orange look, when I try to read the ecu info, after some seconds later the error "Turn OFF and turn ON the dashboard wait 10 sec before of continue" and another error "errori dati1 -1" appears.

My question is, is this normal that both leds are ON when I just plug the OBD connector? Is it ok that they never change? , it's always orange and never blink!

I'm trying to read a peugeot 206 1.6, Bosch ME7.4.4, it also says ME7.4.4 29F400BB, when I opened the ecu to get more info (physically I mean) the flash memory is indeed a ST29F400BB so I assume this is the correct option.

Wastegate
9th March, 2010, 02:25 PM
I have just purchased one of these from ebay, 1260. It trying to get it read the map on my Bosch ME7.4.4 in a Saxo VTR 8v 2001, with no joy, reads the ECU ID but will stop at reading the Rom, any ideas?

What are you guys paying for these items????

jstanchev
9th March, 2010, 09:56 PM
Can I use Galletto 1260 with 409.1 KKL adapter?

jstanchev
9th March, 2010, 10:01 PM
When I start the NEW_SERIAL.exe and press ECU DATA, program say "Start data reading...Opening port impossible".Drivers are installed from directory of galletto.What is problem?

Thanks

djcristi
10th March, 2010, 01:22 AM
Can I use Galletto 1260 with 409.1 KKL adapter?

no, it's different hardware

jstanchev
10th March, 2010, 06:29 AM
What is difference,FTDI chip or pins on OBD connector?Can i transformed this cable to work whit Galletto?

Thanks

ivanxxx
10th March, 2010, 06:21 PM
Can anyone upload original software, older 1250? Please.

djcristi
11th March, 2010, 01:38 PM
ftdi the same, other chips differ, please look at the Interface picture collection thrad, i posted pictures for both hardware there.

gma222
12th March, 2010, 05:21 PM
Can anyone upload original software, older 1250? Please.
1250 software

Floyd
13th March, 2010, 06:42 PM
I have tried reading edc16 on 2.0 diesel golf 5 but no success.

I can get id.

Could it be possible lead needs firmware update using mprog?

This car doesn't need fuse removing to get read/write because I can read/write ok with cmd genuine tool.

Any help appreciated.

djcristi
13th March, 2010, 09:25 PM
galletto doesn't work on CAN vehicles !!!

Floyd
15th March, 2010, 08:37 PM
galletto doesn't work on CAN vehicles !!!

Then why are they listed?

yellowstilo
15th March, 2010, 10:12 PM
because they also may have a K-line for diagnostics and reprogramming besides the CAN-bus in the car.....

djcristi
16th March, 2010, 08:25 AM
yes, few are not full-can

Grizzly74
17th March, 2010, 09:48 PM
with k line only lookin to com wth sirius 32 will link with res 2k k-l wake ecu to read and write as comes up with send wake any more info appreciated

thebenz
24th March, 2010, 03:30 AM
I cannot use my Galletto 1260
My configuration is as follows:
* Windows 7, 64-bit
* Volvo V70 Cross Country SE, Produced Oct-2000
* Galletto 1260 (with red LED on top), FT2xx USB-FTDI

I need the software to make it work.
The original SW provided to me with the cable does not work.

Does anybody know any ways I could use this Galletto 1260 I just purchased ?


I need to reset the SRS Airbag Light (Error Code 26) which turned on when I unplugged the front aircon panel to install a new car stereo.

My Volvo OBDII connector is located at the bottom/right underneath the steering wheel, just above the accelerator.:sheep:

Grizzly74
28th March, 2010, 01:38 AM
i had the same prob did you install the drivers from the disc as i never at first windows installed it for me and could not get it to do anything then installed them from disc and it started to connect but never worked for my ecu came up error send wake

00gtw00
3rd April, 2010, 10:20 PM
any schematics?

Floyd
10th April, 2010, 06:02 PM
because they also may have a K-line for diagnostics and reprogramming besides the CAN-bus in the car.....

So Galletto does work on can vehicles using K line and that's why they listed.

Reading with can is very slow anyway on most systems.

del635
10th April, 2010, 08:28 PM
You must add kline to ecu plug yourself, theres just no physical wire there at obd socket, then it should work fine. Wont work on bench afaik theres immo problem.

jimma72
19th April, 2010, 01:18 AM
I got read error on my audi tdi 1,9 -99 and same on my fathers audi a4 1,8t 2002. "speed error"

Some no why? have try to take out the fuse and have good power.

mimush
20th April, 2010, 08:27 PM
do you wont to see serial namber your Galleto? Opening Galleto to WinHex program and go to adress 0249E90.

bd_bboy
27th April, 2010, 09:20 PM
Can someone tell me where the drivers (which directory) that come with the CD should be installed on Windows? XP or Vista?
And should we choose the FTDI updated drivers on the oficial site posted before?
Thanks.

levisdj
27th April, 2010, 10:00 PM
It's only a matter of original vS clone galletto.Try buying the original one with all the updates and everything, then say if it works or not [all the expensive stuff, has a reason to make it's price worth.]

bd_bboy
27th April, 2010, 10:29 PM
I have install the CD drivers (old, from 2005).
But I cannot read or "ECU data"... I have choose EDC16U1 and EDC16U31 from VW, because I have an Altea from 2007 (BXE).
In a previous thread, I have asked and people from this forum told me that would work...
Any ideas? Am I doing something wrong?

PS: the galletto sw errors were always:
"Start reading...errore SK1
Errore SilentKeyLettura"

yuly4you
29th April, 2010, 10:13 AM
it's good for something that galletto 1260 or not?

yuly4you
29th April, 2010, 10:50 AM
knows one of you if i can use galletto to remap my ford mondeo 2.0TdCI 131hp engine code FMBA ???

yuly4you
30th April, 2010, 10:07 AM
i have received my new galleto 1260 and....is the one with bicolor led...i can make this one to work with sirius 32? if anyone can help me, please do it....i have read all the posts on this topic...it is ok il i link those 2 contacts?my version is that one that has a picture with a red color link made on it, posted many times here,,,,please help...

easytech
30th April, 2010, 12:47 PM
@bd-bbot Seat MY2007 is probably can-bus. Galetto clone is only K-line.

bd_bboy
1st May, 2010, 09:01 AM
@bd-bbot Seat MY2007 is probably can-bus. Galetto clone is only K-line.

So, clearly, the galletto clone does not always come with the correct FTDI drivers...
Why do all the commercial descriptions say that all of those EDC16's drivers work for reprogramming (R/W)???

AUDI VW BOSCH_EDC16U31 M58BW0160 R/W
A3 2.0 TDI 140 CV
A4 2.0 TDI 140 CV
Golf 5 1.9 TDI 105 CV
Golf 5 2.0 TDI 140 CV


And can galletto clone work for diagnostics, as someone mention before? With which SW ?

Thanks.

bd_bboy
1st May, 2010, 03:34 PM
You must add kline to ecu plug yourself, theres just no physical wire there at obd socket, then it should work fine. Wont work on bench afaik theres im*o problem.


@bd-bbot Seat MY2007 is probably can-bus. Galetto clone is only K-line.


My galletto is the same of a previous poster, but I have not connected K-Line with L-Line (with the 2k ohm resistor).
Do I have to do this?
Or instead, I have to add the K-Line to my ECU car plug?
Is there a schematic where we may change one of the wires in the ECU car plug to the K-Line connector of the ECU car plug(is this possible)?
Or do I have to do both things?

hollow
2nd May, 2010, 03:08 AM
i have same error as you .never had this before and must have read and writo 30 cars before until now edc16 u1 from 2003 .


car before this had errore changing speed and couldnt write to it . i still havent found a solution to any of these problems

hollow
2nd May, 2010, 05:50 PM
found the problem to the silent key errore

corrupt drivers ,but even with the correct drivers for galetto it still didnt work . i did solve it though i installed vagcan 1.4 drivers .

now works like a charm again

bd_bboy
3rd May, 2010, 08:38 AM
found the problem to the silent key errore

corrupt drivers ,but even with the correct drivers for galetto it still didnt work . i did solve it though i installed vagcan 1.4 drivers .

now works like a charm again

Thanks, Hollow. :top:
I will try it. Can you post or send PM with those drivers? Thanks again.

By the way, did you change your cable in some way (for ex, connected K-Line with L-Line)?

bd_bboy
4th May, 2010, 10:32 AM
Thanks, Hollow. :top:
I will try it. Can you post or send PM with those drivers? Thanks again.

By the way, did you change your cable in some way (for ex, connected K-Line with L-Line)?

Thanks A BUNCH, man!!!
That was the trick, the drivers of this thread (initial posts) from VAG K 1.4 and using galletto 1260 SW does work !!!
After choosing the ECU/driver, I had to pick line:
0---------------------0.
I don't know why, maybe because my car is a Seat Altea and the driver only shows Audi/VW models.
I did not change my cable in anyway, like said before for other cars.

My original file is in attach. Does anyone a modified one? How much extra power?
Bytes: 1FFFFF
Checksum: D86C
Marca: Bosch
Num. HW: 1037382082
Num. SW: 1037382082

Thanks to all.

bd_bboy
17th May, 2010, 10:42 AM
I have a SEAT ALTEA 1.9 TDI PD (105cv) EDC16U34 0281013232 03G906021LN (1037382082).
I will try to sum up my history with Galletto 1260.

First, when it arrived, didn't work with original drivers...don't know if it was my mess up, but in this forum someone said that FTDI drivers from VAG K+1.4 would work. AND IT DID, choosing option CHECKSUM at writing on EDC16U31 driver.
I have done 3 changes and all went fine, until yesterday... after erasing the BIN file in the ECU, and after starting initialization...KABUM! It crash! Worst of all, the ECU was erased and the car didn't START: "Writing initialization error"!!!
I WENT CRAZY!!!

But when I try to cool my head and try to uninstall the drivers. After finding the correct uninstall EXE for FTDI, I managed to uninstall and install again.
For my GREAT relief, the cable worked again!

So, moral of the story, expect the unexpected from the chinese clone cables, cheapness has a downside...
But this experience serves to all, don't get desperate, this driver problems can happen.

marto12
21st May, 2010, 02:55 PM
Hi,

Last year I bought the Galletto 1260 clone from e-Bay and had no success in reading the Sirius32N on my Scenik. I tried both inside the car and out of the car. In both cases I had the same result - cannot wake cpu, turn off dash and retry in ....
I think that my galletto has l-line connected. It also has a led.
As I have read several posts back, some people managed to read the ecu modding the pcb.
Does anyone have the solution for Galletto with led?

Thans in advance.

Martin

granada
25th May, 2010, 05:13 PM
i also bought a galletto 1260 clone, the one with the led on it. inside both pin 15(L) and pin 7(K) are conected on the board, but it still gives Error Wake Send message on sirius 32.

granada
26th May, 2010, 10:18 AM
look what i'we found, is it posible that K and L should be connected like this with current from pin 16 trough a 1kohm resistor? any ideas?

update:

nope, no good, it doesn't work.

seed212
29th May, 2010, 08:35 AM
You must add kline to ecu plug yourself, theres just no physical wire there at obd socket, then it should work fine. Wont work on bench afaik theres im*o problem.


please
how can i make k line to ecu ( CAN BUS ) plug ?
thanks

topwally
29th May, 2010, 08:09 PM
Hello everbody,just joined your forum and i am newbe to chip tuning ect, I would like to be pointed in the right direction to buy a GALLETTO V.1260 Who can supply .I have seen the GALLETTO V.1250 but not the 1260 version. Regards Topwally

hollow
30th May, 2010, 12:35 PM
sry for not replying sooner ,i havent changed anything in the interface ,the cable is used as it come ,not internal mods necessary .

alzaj
30th May, 2010, 01:28 PM
@bd_bboy, @hollow
You successfully use the galletto 1260 cable with bicolor led.
My led always shows red color. I even don't know what the other color is.
Can you please tell the meanings of the colors?
Thanks

seed212
1st June, 2010, 09:18 AM
PLEASE THE Galletto 1260 .
CAN I USE TO READ/WRITE ECU BOSCH ME9.6 CAN ?
http://www10.0zz0.com/2010/06/01/08/952115160.jpg (http://www.0zz0.com)
THANKS

medmyre
8th June, 2010, 05:40 PM
This should be schematic of Galletto with working L line, but also has LED diodes...

This actually does work? L line

superbaas
9th June, 2010, 10:13 AM
i posted something

HGV_DIAG
10th June, 2010, 12:04 AM
i posted something

WTF... So have i

bing17
13th June, 2010, 03:46 PM
:bike:the big g works everytime

moddingmaster
13th June, 2010, 09:52 PM
this clones 1260 are a pain in the ass.

Fordracer4life
15th June, 2010, 02:32 PM
where is the best place to by a original 1260 not a clone or who really makes it?

ipejasinovic
15th June, 2010, 03:17 PM
F.lli Galletto (http://www.galletto-flli.it/)

eSb
19th June, 2010, 03:54 PM
is it possable to use a Galletto 1250 Clone with 1260 Serial & Driver to Flash with windows 7 ?!

I dont like to change to windows xp again...

pawliukazz
19th June, 2010, 04:01 PM
is it possable to use a Galletto 1250 Clone with 1260 Serial & Driver to Flash with windows 7 ?!

I dont like to change to windows xp again...
I guarantee it won't work with win 7
If you want to use 1250 clone as 1260, you have to rewrite the FTDI chip inside or via usb cable with mcprog or simillar software. what you have to do is you just have so change it's serial number to a valid 1260 serial number :)

cheers :beer:

zecas
22nd June, 2010, 10:41 AM
I guarantee it won't work with win 7
If you want to use 1250 clone as 1260, you have to rewrite the FTDI chip inside or via usb cable with mcprog or simillar software. what you have to do is you just have so change it's serial number to a valid 1260 serial number :)

cheers :beer:
yes it is possible to use 1250 with 1260 without reprograming just use this exe in 1260 software with your 1250 cable.

it will work in vista 7 and xp

Ciochy
6th July, 2010, 10:29 PM
hello everybody, i checked the entire post. I got a galletto 1260 clone with bi-color LED. I can't read or write on sirus 32, i tried drivers and programs mentioned here but nothin, maybe i`m doing something wrong. i checked the SN in the chip it is : "New_Serial.exe v1260 -> ID STRING "47514789" and i am getting the PORT error. the device is set on com 2. hope to hear ideas thx

pawliukazz
7th July, 2010, 07:16 AM
hello everybody, i checked the entire post. I got a galletto 1260 clone with bi-color LED. I can't read or write on sirus 32, i tried drivers and programs mentioned here but nothin, maybe i`m doing something wrong. i checked the SN in the chip it is : "New_Serial.exe v1260 -> ID STRING "47514789" and i am getting the PORT error. the device is set on com 2. hope to hear ideas thx
1. What windows are you using?
2. Are you sure it's 1260, not 1250?
3. try using this version of galletto 1260:
http://www.digital-kaos.co.uk/forums/f104/galletto-1260-installer-113794/

Now post back results :)
cheers :beer:

Ciochy
7th July, 2010, 06:17 PM
ok tried the program still the "can't open port" or something error. I am using XP and on the interface it is written EOBD-1260 as i said in the FTDI chip is the 47.... serial. Still don't know how to solve the open port error.

pawliukazz
7th July, 2010, 06:26 PM
ok tried the program still the "can't open port" or something error. I am using XP and on the interface it is written EOBD-1260 as i said in the FTDI chip is the 47.... serial. Still don't know how to solve the open port error.
Try reinstalling drivers. Use drivers from the same installer.

I have no mere more ideas because it's with LED and as far as i know it differs from those without LED. (I have the one without LED).

Ciochy
7th July, 2010, 09:35 PM
i tried the drivers from the pack that i used. :(

pawliukazz
7th July, 2010, 09:57 PM
i tried the drivers from the pack that i used. :(
Well i suggest you trying on a different pc...

SatLinkX
8th July, 2010, 05:59 PM
Extract this exe to your galletto install dir and run. Look closer at version. So, the question is: Fake or Original?!
it's original software?

pawliukazz
8th July, 2010, 06:07 PM
it's original software?
If you are asking about mine posted here, then yes, it's original.

ipejasinovic
8th July, 2010, 07:03 PM
1260 original? lol

pawliukazz
8th July, 2010, 07:22 PM
1260 original? lol
Yes, m8. If you don't know yet :P

ipejasinovic
8th July, 2010, 07:28 PM
Should we ask guys from FG Technology (http://www.galletto-flli.it/)?

pawliukazz
8th July, 2010, 07:30 PM
Should we ask guys from FG Technology (http://www.galletto-flli.it/)?
Well interesting m8... Who made galletto 1260 cable? :D It didn't make itself and software didn't come out of nowhere... Maybe we really should ask them.

ipejasinovic
8th July, 2010, 07:34 PM
Who said that there is 1260 cable?

pawliukazz
8th July, 2010, 07:36 PM
Who said that there is 1260 cable?
I do :D Although the hardware is pretty much the same as 1250 but eprom differs m8 :)

ipejasinovic
8th July, 2010, 07:46 PM
You want to say, if I now put here a 1270 version with same schematic as 1250, but with different ept file for FTDI, with different serial number than 1250 and 1260 and with new icon on EXE file, is that going to be new and original 1270? If yes, give me 20 min. and new Galletto will be out!

pawliukazz
8th July, 2010, 07:53 PM
NO m8. Galletto 1260 is OUT THERE! and it has more functions that 1250! Becides, why do you think this thread is named "Experience with Galletto 1250/1260 tool" Have you installed 1260 version? See yourself that it differs from 1250 and it's NOT HexEdited :D

ipejasinovic
8th July, 2010, 08:07 PM
1. Count for me that functions
2. This isn't official forum of Galletto. I can make my own thread about 1270 version. That doesn't mean v1270 is for real.
3. Hex editor is relevant to you as only measure for checking do two different EXEs represent same program or not?! What if I pack one original EXE with PCGuard and copy of original EXE with WinLicense, they are now different programs?! Dude, dude...

pawliukazz
8th July, 2010, 08:11 PM
1. Count for me that functions
2. This isn't official forum of Galletto. I can make my own thread about 1270 version. That doesn't mean v1270 is for real.
3. Hex editor is relevant to you as only measure for checking do two different EXEs represent same program or not?! What if I pack one original EXE with PCGuard and copy of original EXE with WinLicense, they are now different programs?! Dude, dude...
oh my god... I have galletto 1250 and 1260. And 1250 works only with 1250 soft and 1260 only with 1260 soft.... Just download 1260 version which i provided here, you will see the dofference yourself? M8, what makes you so convinced that you are right?

New function (for example): For some VAG cars on 1250 there was ability to read only in "boot mode" which means you would have to remove it from the car, on 1260 you can read it in the car, which means no need to remove it from the car :)

ipejasinovic
8th July, 2010, 08:15 PM
Because I know. My friend has original 1250 and he said that was last version of Galletto 1 series. After 1.2.5.0, version 2 arrived with new software and hardware (which can be now seen on Galletto site).

If you do have real 1260, then I'll shut up!

pawliukazz
8th July, 2010, 08:17 PM
Because I know. My friend has original 1250 and he said that was last version of Galletto 1 series. After 1.2.5.0, version 2 arrived with new software and hardware (which can be now seen on Galletto site).

If you do have real 1260, then I'll shut up!
then why come that i somehow have 1260 m8? And if you looked more on the treads, many people have 1260...

ipejasinovic
8th July, 2010, 08:19 PM
New function (for example): For some VAG cars on 1250 there was ability to read only in "boot mode" which means you would have to remove it from the car, on 1260 you can read it in the car, which means no need to remove it from the car :)
That was because on 1250 clones, current wasn't right and also L line didn't work well.

ipejasinovic
8th July, 2010, 08:19 PM
then why come that i somehow have 1260 m8? And if you looked more on the treads, many people have 1260...
Clones, dude, clones! No one here has 1260 original.

pawliukazz
8th July, 2010, 08:21 PM
That was because on 1250 clones, current wasn't right and also L line didn't work well.
galletto 1260v-OBDAUTO---BMW OPS VAG-COM,Tacho Universal,KWP2000,BMW Scanner,BMW Carsoft,ELM323,Code Reader,Can-bus (http://obdauto.com/views.asp?hw_id=201) - what can i say...

pawliukazz
8th July, 2010, 08:22 PM
Clones, dude, clones! No one here has 1260 original.
are you saying that chineese made 1260??? and changed software/hardware>>

ipejasinovic
8th July, 2010, 08:23 PM
lol original Galletto for 23$ on Chinese site lol lol lol

pawliukazz
8th July, 2010, 08:25 PM
lol original Galletto for 23$ on Chinese site lol lol lol
dude, i'm talking about software! that software is original and not modified as many others here likes to edit to 1270 or 1280!

ipejasinovic
8th July, 2010, 08:33 PM
that software is original and not modified
:rofl: :rofl: :rofl:

Stop talking please, You'll kill me!

:rofl: :rofl: :rofl:

pawliukazz
8th July, 2010, 08:38 PM
:rofl: :rofl: :rofl:

Stop talking please, You'll kill me!

:rofl: :rofl: :rofl:
Well i can say the same about you m8, since you don't have galletto, but you post as you do.... Anyways it won't stop forever... Let's say we both know our truth alright?

ipejasinovic
8th July, 2010, 08:46 PM
OK, let's make conclusion: If there was original 1260 (Maybe was, no one knows for sure) why:
1. Signs of LordPE are inside EXE?
2. Why your Galletto use 47514789 serial when original was like 739451xx?
3. Why your Galletto doesn't ask for registration, when original does?
4. Why there are Red lines in SW when original didn't have?
5. Why icon of exe is different than original? (Even v2 has same icon as 1250)

What did you said? Not modified?!

lol :rofl: lol :rofl: lol :rofl:

pawliukazz
8th July, 2010, 08:53 PM
OK, let's make conclusion: If there was original 1260 (Maybe was, no one knows for sure) why:
1. Signs of LordPE are inside EXE?
2. Why your Galletto use 47514789 serial when original was like 739451xx?
3. Why your Galletto doesn't ask for registration, when original does?
4. Why there are Red lines in SW when original didn't have?
5. Why icon of exe is different than original? (Even v2 has same icon as 1250)

What did you said? Not modified?!

lol :rofl: lol :rofl: lol :rofl:
You still don't get it do you?... To be clear:

1. There are a LOT of fake versions on the internet which were edited to galletto 1270 or "supper eobd 1300 whatever" They were edited the name ONLY, and many pleople get comfused, and think that it's real version. What i mean "Original" is unmodified version of v1260 that works with galletto 1260 cable, clone or oridinal, doesn't matter. Are we clear now?

Anyways we're just flooding thread, and it can continue forever... Good luck m8...

Cheers!

ipejasinovic
8th July, 2010, 08:57 PM
Dude, just answer on my questions (All informations for my question I've get from files you posted). One by one. Please!

I'll repeat them:
1. Why signs of LordPE are inside EXE?
2. Why your Galletto use 47514789 serial when original was like 739451xx?
3. Why your Galletto doesn't ask for registration, when original does?
4. Why there are Red lines in SW when original didn't have?
5. Why icon of exe is different than original? (Even v2 has same icon as 1250)

pawliukazz
8th July, 2010, 09:00 PM
Dude, just answer on my questions (All informations for my question I've get from files you posted). One by one. Please!

I'll repeat them:
1. Why signs of LordPE are inside EXE?
2. Why your Galletto use 47514789 serial when original was like 739451xx?
3. Why your Galletto doesn't ask for registration, when original does?
4. Why there are Red lines in SW when original didn't have?
5. Why icon of exe is different than original? (Even v2 has same icon as 1250)
You don't get what i want to say.

Maybe this will help you:
http://www.digital-kaos.co.uk/forums/f104/galletto-1265-a-63400/

ipejasinovic
8th July, 2010, 09:03 PM
So, you admit that your version is fake?!

pawliukazz
8th July, 2010, 09:14 PM
So, you admit that your version is fake?!
Am i talking chineese? Ok, last post for you, hope you will finally understand.

The thread was opened when the 1260 wasnt out. So at the beginning of the thread people say that 1260 is fake. On the older ones posts, people buy real 1260 cables and want the software for them, so they need software. And what do they see? A fake versions iof 1280 and blabla. So they think they are real ones. what i'm trying to say now, is that people who has 1260 cable (clone or not) they shall use this version, as i said "original" (i admit maybe the wrong word used), because this version is working with 1260 cable and software from this point wasn't more edited and it real 1260, not a fake 1280 or blabla.

ipejasinovic
8th July, 2010, 09:32 PM
I'll explain what really happen'. Chinese didn't have a good clone for 1250 and L line didn't work. On some cars, wake up signal is sent trough L line. So, that Chinese version didn't work well. Then, they figure out how to create a working L line (for you, that it's science fiction). Since F.lli. Galletto came out with new version (new version after 1.2.5.0 was 2.0.0.0), Chinese came out with also new version 1260 which finally was like 1.2.5.0 should be. But, how can they make you buy new device, if you already have 1250. So, they changed a serial inside eeprom and inside exe, so now 1260 won't work with 1250 and you think it's new product. But, it wasn't!

You said that you have 1250 and 1260. Do you want me to make small correction inside 1250 exe so that you can use it with 1260 hardware and vice-versa?

pawliukazz
8th July, 2010, 09:43 PM
I'll explain what really happen'. Chinese didn't have a good clone for 1250 and L line didn't work. On some cars, wake up signal is sent trough L line. So, that Chinese version didn't work well. Then, they figure out how to create a working L line (for you, that it's science fiction). Since F.lli. Galletto came out with new version (new version after 1.2.5.0 was 2.0.0.0), Chinese came out with also new version 1260 which finally was like 1.2.5.0 should be. But, how can they make you buy new device, if you already have 1250. So, they changed a serial inside eeprom and inside exe, so now 1260 won't work with 1250 and you think it's new product. But, it wasn't!

You said that you have 1250 and 1260. Do you want me to make small correction inside 1250 exe so that you can use it with 1260 hardware and vice-versa?

Thanks m8 i understand that now. It's just we were talking about different things with a "not high quality" english language :D so this was a misunderstanding :)

And thanks, no need to change exe. I rewrote eprom from 1250 cable and now it works ok.

Just for the future. I'm not so bad at electronics m8, so that's not so science fiction for me :) Ofc i'm not a hero in electronics, but i know what i do.

Hope no more misunderstandings m8 :D :boxing:
Peace

ipejasinovic
8th July, 2010, 09:55 PM
Thanks m8 i understand that now. It's just we were talking about different things with a "not high quality" english language :D so this was a misunderstanding :)

I agree.


And thanks, no need to change exe. I rewrote eprom from 1250 cable and now it works ok.That's what I'm talking about. 1260 is just better cracked and copied version 1250. About eeprom, yes, you could do that too, no problem. You can change sn inside exe or eeprom, but must be the same to work.


Just for the future. I'm not so bad at electronics m8, so that's not so science fiction for me :) Ofc i'm not a hero in electronics, but i know what i do.I didn't want to say that you're dumb. You just seems amazed when I mention L line which Chinese have fixed. If you open Galletto, you can see that is basically KL device with a few things changed. No science fiction, of course.


Hope no more misunderstandings m8 :D :boxing:
PeaceI hope so too.

Ciochy
12th July, 2010, 08:15 AM
installed FTDI driver 2.06 now the program doesn't show the PORT error, but in 3 sec it freezes, tried the interface on 2 different laptops with different OS

saxon1978
13th July, 2010, 11:50 PM
is there a way

campy
14th July, 2010, 02:09 AM
work in clone 1260?

SergeyIg
28th July, 2010, 10:43 PM
Hi, lay out please the scheme the worker

magnacin
29th July, 2010, 08:18 PM
Hello,
I have a small issue with cloned galletto 1260.
I have a peugeot 206 1.6 lt 16 valve petrol engine ECU bosch me 7.4.4.
I can read ECU fine but when I try to program I get write errore 2
Can ayone help me with this.
Thanks in advance

lagas
17th August, 2010, 06:08 PM
hello,

anyone has successfully read with galleto 1260(clone) like this http://www.digital-kaos.co.uk/forums/f173/experience-galletto-1250-1260-tool-45024/index4.html

ecu audi a4 2005 1,9 TDI PD 85kw 115hp
ECU: Bosch, EDC16U31, 03G 906 016 FE, HW: 028 101 212 7

I found what this car is Kline/Can, but i can't read ecu. Maybe need it on bench. I read here what k-line wire of the ecu not in obd, it is really for this model?

Thank's.

blackpirate
20th August, 2010, 11:30 AM
STUPID QUESTION???

i dont have a galletto , but i saw the software!

now comes the question:
can be used to read ecu and do immo off? then write the file back to the ecu?

because i see reading options flash or eeprom....


thnx in advance!

lagas
20th August, 2010, 11:33 AM
my knowledge, it only reads the parts of flash, only maps table. If I'm wrong this was corrected with colleagues.

pawliukazz
20th August, 2010, 08:15 PM
STUPID QUESTION???

i dont have a galletto , but i saw the software!

now comes the question:
can be used to read ecu and do immo off? then write the file back to the ecu?

because i see reading options flash or eeprom....


thnx in advance!
It reads the flash not the eprom, and flash usualy has nothing to do with immo... so it's pretty useless for immo. It can be used to read flash, modify it (add more power for engine), then to write the new file to ecu...

@lagas it usually reads all flash, ofcource there are exeptions, but i was always able to read flash fully from cars such as, peugeot, audi, vw, mb. i was only able read "maps table" for BMW...

lagas
21st August, 2010, 11:53 AM
@lagas it usually reads all flash, ofcource there are exeptions, but i was always able to read flash fully from cars such as, peugeot, audi, vw, mb. i was only able read "maps table" for BMW...


jap, now I do remember that. thank's

pepar
23rd August, 2010, 03:39 AM
Galletto 1260 lol with Bicolor- LED does not work with my "Renault Clio C RS 2.0 16V 197cv" and my Girlfriends "Renault Clio B Campus 1.2 8V"...
i have to try changing the Serial Numbers, the Drivers, insert a resistor with a switch between k and l line...but nothing happend...
it is a pity, that i?ve payed $7 for this tool on Ebay + $18 for shipping... and invest so much time...

its a lemon tool, so keep your hands off!!!

:coffin:

georgegt
23rd August, 2010, 09:20 AM
I have the galletto 1080 and the interface with reprograming dump can be 1250 and 1260 with working K an L line but inside is 2 si9241 one for K and one for L
and for edc16 wv group galletto give conection to ecu directly for K line

dott.chem
23rd August, 2010, 06:46 PM
hi, anybody tried it on fiesta 1.4tdi (siemens ecu) ?

exxl
23rd August, 2010, 09:53 PM
i can say only beware of galetto clone...

this is not good tool .... early or later you will have problems with it....if you want throw money away buy the clone galetto

if you want earn money then think twice about it what to buy for this serious job like ecu flashing.

regards

pawliukazz
24th August, 2010, 06:33 PM
i can say only beware of galetto clone...

this is not good tool .... early or later you will have problems with it....if you want throw money away buy the clone galetto

if you want earn money then think twice about it what to buy for this serious job like ecu flashing.

regards
I partly agree with you, galleto was cheaply designed\made, but as long as you have brain in your head, you shouldn't have problems at all...

gzk
15th September, 2010, 09:00 PM
i have read all the topic and come to gyve my 2 cents .
i have many clone interface , in fact all myine are cloned....
kwp2000+ gray/alu case clone, galletto 1250 and galletto 1260 clone , etc...

all my cloned interface exept a vag commander , and a bdm100 who as burn the first day are work .

never have trouble on any ecu caused by the interface , the few time it was by me (flat laptop battery etc..)

now i have order the last mpps and i will see .

person with trouble have to check them computer :
i have a netbook dedicated for my engine stuff.
some time can not read ecu with my galletto 1260 without any reason , just today i don't work .

i just plug my galletto on my other laptop and it work!! .
some time later , it work again on my netbook , so the problem come from the netbook not my galletto , you see what i mean ??

there are good and bad clone , but the one you can find on the store now are for the most good quality .

you can have issue with multiple version of ftdi drivers installed on you pc like when you have many cable (vag, tacho , etc...)
when you pug your galletto , the computer don't ask you what version you run , on the peripheric panel it seem your galletto is right installed but in fact it false , windows use perhaps the ftdi drivers of you tacho , and your galletto not work .

many time i had this issue and have to reinstall my windows to get it work back .

hope this can help

i have already make sirius with mine no problem

bazare
15th September, 2010, 09:48 PM
galletto clone is reliable on some ecus. if you use it right it wont ever cause trouble. i have both 1250 and 1260 and both work ok on edc15 and sirius32

bd_bboy
21st September, 2010, 03:45 PM
@bd_bboy, @hollow
You successfully use the galletto 1260 cable with bicolor led.
My led always shows red color. I even don't know what the other color is.
Can you please tell the meanings of the colors?
Thanks

Sorry for the late reply, my Galletto 1260 does not have bicolor led, it's always red. But you can listen the ECU working, kind of a hard drive.

Addicionaty, I follow this rule that someone said somewhere:
Crash galleto:
With galleto, if the flash crashes after it says "erasing ecu", do not disconnect the cable, turn off the key without removing it, then do CTRL+ALT+DEL and end "new serial". Turn the key back to ON position, run new serial, read ecu and try to flash again either the ORI or the tuned file if it wasnt a problem related to it.

Besides this, I always reinstall the drivers, each time I use it. Cannot have Galletto and VagCom installed in same computer. Then I follow this procedure:
1) Install cable drivers in laptop
2) Connect the cable to the car OBD plug
3) Turn on car key
4) Open GallettoV1260 sw
5) Select ECU and click on "Checksum on writing" line
6) Read ECU DATA
7) Read ECU file
8) Open file to write
9) Download file to write
10) Read new file from ECU
11) Unninstall drivers (VagKCan1.4china)

Hope this help.

dariusddj
22nd September, 2010, 11:15 AM
i have audi a4 2.0i. works with galletto 1260?

gzk
22nd September, 2010, 06:26 PM
Sorry for the late reply, my Galletto 1260 does not have bicolor led, it's always red. But you can listen the ECU working, kind of a hard drive.

Addicionaty, I follow this rule that someone said somewhere:
Crash galleto:
With galleto, if the flash crashes after it says "erasing ecu", do not disconnect the cable, turn off the key without removing it, then do CTRL+ALT+DEL and end "new serial". Turn the key back to ON position, run new serial, read ecu and try to flash again either the ORI or the tuned file if it wasnt a problem related to it.

Besides this, I always reinstall the drivers, each time I use it. Cannot have Galletto and VagCom installed in same computer. Then I follow this procedure:
1) Install cable drivers in laptop
2) Connect the cable to the car OBD plug
3) Turn on car key
4) Open GallettoV1260 sw
5) Select ECU and click on "Checksum on writing" line
6) Read ECU DATA
7) Read ECU file
8) Open file to write
9) Download file to write
10) Read new file from ECU
11) Unninstall drivers (VagKCan1.4china)

Hope this help.

you can set windows for multiple hardware profile

on each boot it will ask you what hardware profile you want to load .
with this you can have one windows installation , and multiple boot choice to you vag cable , your galletto etc...

dariusddj
25th September, 2010, 09:43 AM
why i have this error? this is my ept file

banetv
26th September, 2010, 11:02 AM
I bought Galletto1260 (clone) and work fine. Chips are FT232RL, MAX232, TL072 and ICL7662. But software galletto has many read and flash options: flash-complete and tab; eprom-complete and tab. OK, but what is different? When I read flash-complete from my car it work abouth 30min (for 448KB file). What are smaller files 64KB or 6KB from TAB option? What is enough for copy CAR-MAP?

satfox69
30th September, 2010, 05:10 PM
FIAT GRANDE PUNTO 1.3 MULTIJET 14/05/08

hw: MJD6F3HW04P

sw: 3546P780

iso: 680723076E

type: 6F3P7

WHEN i READ XITH GALLETO 1260 I BECOME

........
........
000000
.........

DID ANYONE NOW THIS PROBLEM

banetv
30th September, 2010, 08:17 PM
You must have new ftdi driver D2XX Direct Drivers (http://www.ftdichip.com/Drivers/D2XX.htm) and set boud/rate at 38400 in device manager.
I have Punto 1.3mjt IAW Marelli and Galletto 1260 work fine.

satfox69
30th September, 2010, 09:04 PM
thanks, I updated already and tommorow I will test it out

tambalagiul
3rd October, 2010, 11:38 AM
logan tuning can use DDT 2000,that works with KKL USB

cosmind
3rd October, 2010, 12:58 PM
can you post more information about tuning with ddt2000

tambalagiul
3rd October, 2010, 08:18 PM
We use the original database file and tuned. To function, the DDT2000 can be set to unlock the ECU.

:flybye:


:ridinghorse:

tambalagiul
4th October, 2010, 08:04 PM
:thrasher::thrasher:ECU to unlock private relationships!

banetv
6th October, 2010, 10:08 AM
I think, this is one of better vesions of Galletto http://www.autonumen.com/down/EOBD2_1250.zip
I am not sure, is it from original release?

bazare
7th October, 2010, 06:31 PM
We use the original database file and tuned. To function, the DDT2000 can be set to unlock the ECU.

:flybye:

:ridinghorse:
have you tried this? it really works?

banetv
7th October, 2010, 07:34 PM
There are many version of Galletto. I must test it...
Galletto_eobd2_KKL_333.rar.rar download for free on file share letitbit.net (http://go.rapiddigger.com/filehosting/galletto-eobd2-kkl-333-rar-rar-50193075/)

tambalagiul
8th October, 2010, 08:56 PM
I think the word!
ECU to unlock private relationships.....!

grigorean_alexandru
11th October, 2010, 09:56 PM
hello guys, i have read all your threads.. and what i am curious is..

i have bought recently a galetto clone, and i want to know what risks exists, what cars should i try and what cars i shouldn't because i really don't want to burn any ecu.

thank you for being so kind!

bazare
11th October, 2010, 10:59 PM
being only a cheap clone you should never rely on this tool. you should always have a second plan. I have tried some ecu's many worked many didn't worked. Most of those that didn't worked I managed to reflash using other tools. One ecu is still dead after galletto experience:D. I will try one more method and then desolder job:)
so my advice is stay away if you don't always have recovery plan.

in principiu nu te baza pe interfata asta pentru ca atata dai atata face. Am blocat destule ECU cu scula asta.

rappttor
11th October, 2010, 11:22 PM
i didnt succeded in bloking any ecu with the galeto clones i used, but the risk is always there, so bazare is right, a backup plan is always good...or someone to back you up...

bazare
12th October, 2010, 08:56 AM
hello... ever tried sid803 via galletto?
i can't read but manual say it can write. i need to remap a friends Peugeot 407 sid 803. anyway my last option will be bdm:)

grigorean_alexandru
13th October, 2010, 11:57 AM
being only a cheap clone you should never rely on this tool. you should always have a second plan. I have tried some ecu's many worked many didn't worked. Most of those that didn't worked I managed to reflash using other tools. One ecu is still dead after galletto experience:D. I will try one more method and then desolder job:)
so my advice is stay away if you don't always have recovery plan.

in principiu nu te baza pe interfata asta pentru ca atata dai atata face. Am blocat destule ECU cu scula asta.

and can you help me? i mean ecus are ok to read and write and what not?

nu vreau sa fur painea nimanui.

thank you

bazare
13th October, 2010, 09:30 PM
Hey there again ... as I already said galletto clone does the job in many cases ... in many cases you can't read or write and there are some cases when galletto locks the ecu. In those cases you need a second plan ... programer or bdm whatever the case. it depends on what risks you are ready to take. to answer you question edc15 is ok via galletto and some edc16.

rappttor
14th October, 2010, 06:11 PM
maybe we should just post here the ecus and cars platform wich this clones bloked...

pawliukazz
14th October, 2010, 08:18 PM
As i mentioned earlier:

Galletto is cheaply made, but if you do everything as it has to be - you won't have problems.

Mostly you block ecu only with your own fauts e.g. you flash different firmware to different ecu, ecu get's unreadible and unwritable, in this case you have to reprogram flash "on the table", if you have original file ofcource, and there is no other solution to fix this problem.

Plus NEVER do anything on the car while writing/reading, that could cause to stop at the middle and leave ecu "blocked"

Always put on charger to the car to maintain good voltage...

rappttor
14th October, 2010, 09:18 PM
hello... ever tried sid803 via galletto?
i can't read but manual say it can write. i need to remap a friends Peugeot 407 sid 803. anyway my last option will be bdm:)

read it only by bdm or something more powerfull...just to be sure that it is corect.
for writing you can use galeto or flasher too...

banetv
19th October, 2010, 06:14 PM
Look, i find here Galletto instalation but I am not sure what is it? Hoax?
Galletto 1260 Install.zip (http://www.mediafire.com/?mzumtoizmzy)
I think this is maked instalation of any user.

pawliukazz
19th October, 2010, 09:00 PM
Actually I made this installer, but someone has apperantly password protected it and may be selling. I posted it here on DK before but due to new rules on the forum, it got deleted.... Anyways, i made it Free For ALL, so i give it here again :)

P.S. PuKazZ is my previous nickname (before digital-kaos)

Enjoy :top:

obdflasher
19th October, 2010, 09:15 PM
Galleto 1250 and 1260 is its same only any idi.t change inside software serial number and too serial number inside eeprom ept cable.

That all !!!

:ridinghorse:

pawliukazz
19th October, 2010, 09:18 PM
Galleto 1250 and 1260 is its same only any idi.t change inside software serial number and too serial number inside eeprom ept cable.

That all !!!

:ridinghorse:
Yes, but you do realise, that if you have a right software then you don't need to change any serial number ;)

bazare
20th October, 2010, 09:38 PM
galletto software is the same in 1250 and 1260... but there are different architectures in the hw. I think the best is the one without LED. The newer one are badly soldered.

banetv
21st October, 2010, 12:21 PM
For me, the best is with chips: FT232RL - usb, and
MAX232 - KKL. Work without errors... until now.

rappttor
21st October, 2010, 12:53 PM
i had both version (RL_BL/M), both worked just fine, the diference between theme was that the RL version didnt make renault 1.4mpi, i dont know why; the BL version (with k,l strap) do it.
anyway both are good and witout any problems.
the difference between 1260 and 1250 is that the first is optimised for vista.

sepistar
21st October, 2010, 01:28 PM
Well try to read ecu of audi a6 3.0 tdi 2006,but no chance:hmmmm2:.Someone made it?
Regards.

banetv
21st October, 2010, 03:45 PM
FTDI chip FT232BM work with USB and directly with KKL (some small help with LM339 or Si9243, buth Si is much better), FT232RL work only with USB and for KKL is some older but good MAX232.

sepistar
21st October, 2010, 08:26 PM
FTDI chip FT232BM work with USB and directly with KKL (some small help with LM339 or Si9243, buth Si is much better), FT232RL work only with USB and for KKL is some older but good MAX232.

You mean that the FT232BM and FT232RL,work on A6 3.0 tdi?
have you succesfull try it?
Regards.

banetv
22nd October, 2010, 09:58 AM
FT232xx is USB connection interface. But FT232BM is sometime used and for receving k and l-line (with signal amplifier and treatment with other chips) in some adapters like KWP, Galletto...FT232RL is used in my Galletto1260 and ELM327v1.4 too. Important is what is K and L line chip? My Galletto has Max232 and work wiht many, many cars but today will not wok with Grande Punto 1.3mjt !! Software is important too. It is lottery . You must try.

sepistar
22nd October, 2010, 10:04 PM
FT232xx is USB connection interface. But FT232BM is sometime used and for receving k and l-line (with signal amplifier and treatment with other chips) in some adapters like KWP, Galletto...FT232RL is used in my Galletto1260 and ELM327v1.4 too. Important is what is K and L line chip? My Galletto has Max232 and work wiht many, many cars but today will not wok with Grande Punto 1.3mjt !! Software is important too. It is lottery . You must try.

Thanks for replay mate,tomorow will open it to see exactly what chip have inside.
Regards

banetv
23rd October, 2010, 01:56 PM
Yesterday I was tested Galletto1260 on Fiat Grande Punto 1.3mjt and did not work wiht its software. Not connect. As KKL scan it work !! I will repaet some tests...

sepistar
23rd October, 2010, 03:56 PM
Mine has FTDI232RL and MAX 232A,but it wont work on audi edc 16.Put some foto on.
Regards

easytech
23rd October, 2010, 09:12 PM
In some of these A6 3.0 the K-line from the ecu was not connected on the OBD connector.(only Can)
You have to connect the K-line to pin72 on the EDC16.

alfabit
24th October, 2010, 05:00 PM
There are two types of ECM initialization : slow init ( 5 baud ) and fast init. On slow init lines K and L are working together so line L needs to be connected, for fast init only line K works, so hardware galetto 1260 is good for ECM on fast init ex. EDC15, DCM12, Sirius34 etc. Slow init is for Sirius 32, so it won`t work on Logan 1.4, 1.6 gasoline.

sepistar
25th October, 2010, 12:40 PM
In some of these A6 3.0 the K-line from the ecu was not connected on the OBD connector.(only Can)
You have to connect the K-line to pin72 on the EDC16.

u now wich pin on obd conector are k-line?
regards

alfabit
25th October, 2010, 02:23 PM
u now wich pin on obd conector are k-line?


pin 7 = k - line