Renault Meganne 2011 CAN TIMEOUT

[paulocallaghan]

I tried doing abs unit on 2011 Meganne today , after my DP3 does the reading , and writing process I can the message can timeout on screen and dp3 stops and program does not work , I have tried 3times and same thing happens every time, my DP3 mmc card is fine , what could be the problem???

[TULGEYWOODMAN]

I tried doing abs unit on 2011 Meganne today , after my DP3 does the reading , and writing process I can the message can timeout on screen and dp3 stops and program does not work , I have tried 3times and same thing happens every time, my DP3 mmc card is fine , what could be the problem???

Have you done a test on the dp3 pins using a multimeter?
Have you done other cars obd the same day, or since?
Have you checked your D3 (all connections) for loose or disconnected wire?
Have you tried a different card?

Are you using jumper leads connected to running donor vehicle?

[paulocallaghan]

Checkedvall the above that you mentioned and I can't find any fault

[Gonpino]

i read dp3 can't do megane3 and fluence, usually kill dash... you need to do direct on epprom.


regards

[paulocallaghan]

Actually did this with the car running and all worked fine

[lupu_sandu]

Always make Laguna3 and Megane3 with engine running.

[smt]

YOU NEED TO DO IT MANUALY

[javyb]

YOU NEED TO DO IT MANUALY
No he doesn't if u read post he solved issue by having car running

[Meat-Head]

PARTLY ON TOPIC:-


often found with ANY Reno diagnostic computer seems hapier with indain running