Piasini siemens cloning problem

[dariobmw]

Try to clone in BDM a sid 206 from a Smax , and the piasini read but
no write , i try to write but it remains stuck in write forever , is any
way to clone the MPC561 ? my galletto 2 no connect to this ecu
in bdm , and xprogm say , the 561 has no flash inside .
Thank's to all for help

[bursuc]

did you try BDM 100 ?

[dariobmw]

Yes but mpc561 in bdm100 is shadowed (not allowed to read) it could be old version my bdm but i will try tomorrow again

[mislav88]

mpc flash is blank in this ecu, copy only flash and eeprom.

[dariobmw]

Yes you are right but i need to clone the mpc561 too (i dont know why ) because the ecu is not perfectly the same , and cloning only the flash
the ecu have the internal error .
No problem of injectors or so , if i only put the key on the ecu say error crank sensor range performance ( not with the original ecu ).
If i put the original donor ecu software , immo problem but no sensors errors .
Original ecu water damaged , donor ecu now crank but erratically rpm recognised (no problem with original ecu but injector session burnt, trust no
reparable ).

Thanks to all for help DK people ever the best