PDA

View Full Version : golf 6 problem after egr off



smt
29th November, 2014, 02:24 PM
hi to all, after many pcr2.1 egr off i constate thers a problem for some(not for all) version when we do egr off
car start fine but spring light on dash board & you found abs communication problem on engine ecu
& you can diagnose abs unit with no fault code & no abs light on
thers a solution for this pb??
thx to all

smt
29th November, 2014, 04:38 PM
NO ONE HAVE EXPERIECE WITH THIS PROBLEM

smt
30th November, 2014, 04:18 PM
?????????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !

mastaflex
30th November, 2014, 07:50 PM
?????????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !

is it necessary that another one must have your problem ?


the problem is the tool you are using .

budG60
30th November, 2014, 08:53 PM
Sounds like you might have deleted too much! You can check if it is related to your file or tool by writing the ori file back again and check what happens.

smt
1st December, 2014, 11:37 AM
is it necessary that another one must have your problem ?


the problem is the tool you are using .
what tool you mean,i told i have done a lot of this ecu without problem only for some version i had this fault

morgano
2nd December, 2014, 12:02 AM
Maybe you turn the wrong switch?

smt
2nd December, 2014, 09:35 AM
-------------------------------------------------------[solved]-----------------------------------------------------

morgano
2nd December, 2014, 01:04 PM
And the winner is? Egr controller switch was at another place? :)