PDA

View Full Version : VOLVO s40 how to read 4N51 1,6D



ZYGI66
4th December, 2014, 07:52 PM
I have galleto ,xprog dont no how to read its bosh 0281011775 any adwise

ZYGI66
5th December, 2014, 12:56 AM
i need read bdm or obd need dpf off i conect like audi edc16 bdm but no work

FritzP
26th December, 2014, 09:54 AM
For Volvo S40 with DV6 engine (PSA) EDC16C34, the best solution are read/write with BDM.
BDM100 EVC do this without problem.

Babos
26th December, 2014, 09:58 AM
Do you know any tool who can read that ecu via OBD?
Or you want just show have smart you are?

FritzP
26th December, 2014, 10:05 AM
Actually, I dont know any tool which do this over OBD, however I know RICA engineering do this over OBD.
Volvo dont have K-line wired to the OBD connector, otherwise maybe the protocol for PSA or Ford with similar engine culd be used.
These ecu's are known to give problems with injectorcodes if the flash are not correct performed, and because of that BDM are the better way.
I am not trying to be smart, but rather helpful.

gttuning
26th December, 2014, 11:01 AM
never see this car done by obd
bdm will work like any other edc16

jolidj
26th December, 2014, 04:35 PM
read write by bdm.