PDA

View Full Version : FGTech Galletto 2 EU version error : tricore password tprot v08



spiridonas
7th December, 2014, 06:28 PM
Hi guys i tried to read in boot mode the
ECU EDC17 C41 - TC1797 from bmw 116 F20
bosch nr. 0281030980
with FGTech Galletto 2 EU (i buy from car-prog.com) and when click in "Ecu Data" button appear this info from ecu :

" Infineon Tricore TC1797
CPU-ID=0000910100001820
Internal Flash ID = 0053C001
Internal Flash 4096Kb Protected
OTP Protect: 0x14000 -- 0x17FFF
Internal Flash2 ID = 0055C001
Internal Flash 4096Kb Protected
EEprom 64Kb Protected

READING ECU
Start reading...ERROR UNLOCK READ - TRY TOOL TRICORE PASSWORD TPROT V08 "


I tried to use the TRICORE PASSWORD TPROT V08 from menu without boot mode but i can't.
Says the message in my photo.

Please how can to read / write this ecu for tuning with my tool FGTech Galletto 2 EU version ?

Many thanks in advance.

Reco
7th December, 2014, 06:46 PM
You must perform these instructions are the documents folder fgtech2

mislav88
7th December, 2014, 06:58 PM
forget about F series with this tool, you cant do it

spiridonas
7th December, 2014, 07:06 PM
You must perform these instructions are the documents folder fgtech2
Hi many thanks i tried to use the TRICORE PASSWORD TPROT V08 with instruction (replace green igniction cable with red permanent and remove resistance and boot mode cable ) but nothing.

spiridonas
7th December, 2014, 08:08 PM
Please with FGTech v54 i can read / write this ecu ?
Thanks

mislav88
7th December, 2014, 08:09 PM
no, for now only magpro xflasher.

spiridonas
7th December, 2014, 08:31 PM
Kess can read / write this ecu ?
Thanks

mislav88
7th December, 2014, 08:34 PM
you really dont give up easily....

spiridonas
7th December, 2014, 08:46 PM
I saw and KTAG K-TAG can do this work :
(Car BMW BOSCH EDC17 C41 DDE8 1220 )





has anyone tried with this tool ?
Thanks

mislav88
7th December, 2014, 08:48 PM
yes it can but only on Exx series BMW, NOT Fxx

spiridonas
7th December, 2014, 09:22 PM
yes it can but only on Exx series BMW, NOT Fxx
Please can you tell me where can find these tool ?
Many thanks my friend for you time !!!!!!!!!!!!!

jakkeviet
7th December, 2014, 09:27 PM
you can not found any clone tools this car. use tuning box

spiridonas
8th December, 2014, 07:43 AM
Many thanks guys, i communicate with carprog and i waiting answer and will forward here.
Thanks

austingreen
8th December, 2014, 08:36 AM
had one KESS V2, it couldn't read data from EDC17, then bought DS17 Infineon Tricore Boot Reader to have a try, finally it works.

spiridonas
8th December, 2014, 09:03 AM
had one KESS V2, it couldn't read data from EDC17, then bought DS17 Infineon Tricore Boot Reader to have a try, finally it works.
I will waiting help from carprog team .
Please can you tell me if DS17 Infineon Tricore Boot Reader can write this ecu ?
Thanks

obnchip
8th December, 2014, 09:47 AM
i done with v54 china 2011 F01 740d edc17cp09....

mislav88
8th December, 2014, 05:44 PM
by the way, how did you open this ecu?

mads36
22nd January, 2016, 06:46 AM
hi

i also made write / read 2009 f02 740D edc17cp9 with out any problems at all with my transdata i was abel to to all 3 options ex / micro/ tuning..
i just read out and x6 same engine with me transdata as well.. so if any willing to sell a2l / setting fil over edc17cp09 740D 302hp i like to hear price?
br

CustomCars
22nd January, 2016, 09:08 AM
hi

i also made write / read 2009 f02 740D edc17cp9 with out any problems at all with my transdata i was abel to to all 3 options ex / micro/ tuning..
i just read out and x6 same engine with me transdata as well.. so if any willing to sell a2l / setting fil over edc17cp09 740D 302hp i like to hear price?
br

Hello, we have super map pack for it. Damos/AL not seeing yet but that's no really needed to much.