Nissan Navara D40 Denso read problem :(

[erdilmen]

Dear friends
i have problem with navara D40 2.5 td with particule filter.
I need to remove dpf from ecu.
I tried read ecu with galleto 2 v54 clone but i cant.
Can anyone share me connection diagram which is working.
I have galletto 2 v54 and bdm.
Ecu part number is
mb275800-6733 denso
B.regards

[mastaflex]

you have FGtech V54 so i think you have the doc that goes with.

you have BDM !!!! no comments :torn:

sincerely , do you know enough about the ecu you are about to make ?

and suppose you succeed to read , there will be another thread asking mod ?

[erdilmen]

you have FGtech V54 so i think you have the doc that goes with.

you have BDM !!!! no comments :torn:

sincerely , do you know enough about the ecu you are about to make ?

and suppose you succeed to read , there will be another thread asking mod ?
i connect it via original document butnot read.
Im normally not working on japanese and korean cars.just german...
This car come to us cancel dpf and i need help this device can or not?
Because on dk someone says fgtech cant some one says can...
If you know anythink about this please help...

[VirtualTech]

Japan and read ecu = piasini.

[LaraVAG]

do corect soldering and will be good

[Babos]

And read good manual how you must work with fgtech!! in original tool is important notes!!!! about use manual you can broken Tool and you PC! and that is write in original manual think about that what surprise can wait you in china tool :D
I have few reports from customer who try read denos ecu with fgtech Jtag and he cant do! My friend have orig ktag and one time he to cant remap denso ecu!
Piasini 4.1 clone work great with Denso ecu and cost is FANTASTIC LOW :D
Buy and forget problems with Fgtech in this Denso ecus.

[erdilmen]

do corect soldering and will be good
all correct! its not about soldering.
also i tried to read x20xev vectra b from obd.
Normally file size have to be 128 kb but it reads 64kb...
I dont understand this device...

[CLK1201]

KTAG is the best for denso ECU

[Music73]

Piasini works well on this Ecu.. You may find that you have to flip the ribbon cable from the way you think it is... But doesn't harm Ecu if done work way round...

[erdilmen]

And read good manual how you must work with fgtech!! in original tool is important notes!!!! about use manual you can broken Tool and you PC! and that is write in original manual think about that what surprise can wait you in china tool :D
I have few reports from customer who try read denos ecu with fgtech Jtag and he cant do! My friend have orig ktag and one time he to cant remap denso ecu!
Piasini 4.1 clone work great with Denso ecu and cost is FANTASTIC LOW :D
Buy and forget problems with Fgtech in this Denso ecus.
dear friend today i get piassini and its really good as you said.
i read ecu today.
every reading file is changing
car is in safe mode.
can you make it dpf off for me?

[bursuc]

dear friend today i get piassini and its really good as you said.
i read ecu today.
every reading file is changing
car is in safe mode.
can you make it dpf off for me?


if every reading is changing flash that means something is not right. please check your soldering points and check if right voltage is supplying the ECU .
I test with piasini on vauxhall astra H 1.7 CDTI denso ECU and the readin is same all time.
If you gonna mess the file you know the car will not start anymore after that .
There was another thread asewell.

Check what are you reading from ecu and be sure is the same file all the time.

Best regards. Happy new Year to everyone ! :)

[moky]

Io terminal read and write 5mn without soldering..

[Babos]

not only he :D

[smt]

some times with free help you need to try & try & try & tryyyyyyyyyyy

[CLK1201]

MMC FLASHER is the best obd2 for denso nissan navara too

[CLK1201]

dear friend today i get piassini and its really good as you said.
i read ecu today.
every reading file is changing
car is in safe mode.
can you make it dpf off for me?
i have solution too for nissan navara dpf

[CLK1201]

Io terminal read and write 5mn without soldering..
MMC FLASHER is the best obd2 for denso nissan navara too

[erdilmen]

i read ecu with piassini

[Nikola123]

Piasini is great tool for read and programming denso ecu, many times without any problem...

[mishu_b]

i have solution too for nissan navara dpf

if you have support the forum member to solve the issue.
if you only say that it looks like advertise, than you have to read the forum rules!!!!

[CLK1201]

here u go that i promise

[speedservice]

Ioterminal can read flash & eeprom without open the ecu!!!