View Full Version : car 2003
nesko0707
11th December, 2014, 01:17 PM
Hi, i need code for CAR 2003 radio
sn GM020317510131
7 649 200 324
another question, display is broken, the new no shows radio station and rds, only the date and time..
tnx
Faraday
11th December, 2014, 01:23 PM
try 4775...............
Check iso connector if non opel radio was fitted before then one pin is disconnected
nesko0707
11th December, 2014, 01:26 PM
tnx m8, its opel radio, it is necessary to encode new display fod old radio?
Faraday
11th December, 2014, 02:43 PM
Check wiring
nesko0707
11th December, 2014, 02:57 PM
wiring ok, flet cable on display is broken,i can not input code, safe on display, barely recognizable to see, where is the dump to reset the counter in eeprom (24c01) or mcu?
mcd76
11th December, 2014, 03:23 PM
Code Entry as Follows:
Turn Off Stereo
Switch On Ignition (No Need To Start Engine)
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps
nesko0707
11th December, 2014, 04:03 PM
after "SAFE" not show " 10 - - - -", it's probably typed the wrong code several times, now car is ON ignition, waiting a few minutes or hours...
barbatecat
11th December, 2014, 07:17 PM
"10 - - - -" means that the code is not entered even once, this is the first attempt
===================================
Sorry, misunderstood
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.