View Full Version : Fiat Doblo 1.3 multijet dpf off
mipmf
12th December, 2014, 08:45 PM
Please remove dpf from file, car is Fiat Doblo 1.3 mjet ecu no 51839150,MJD 6F3.D1/HW03R, 85HP,file read with mpps.
Thanks!
baltazar3
12th December, 2014, 09:28 PM
Here is ....pm
Check all sensors and reset eeprom.
mipmf
13th December, 2014, 07:38 AM
dont have pm from you...
baltazar3
13th December, 2014, 12:21 PM
dont have pm from you...
Just send again.....check pm
mipmf
13th December, 2014, 08:54 PM
test on monday ,what is mean reset eprom?
mihaiservice
14th December, 2014, 09:46 AM
test on monday ,what is mean reset eprom?
Hi
before write the flash file you must reset dpf value to new or 0% with any diag tool like Autocom/Fiat ecuScan or other...
Mike
mipmf
16th December, 2014, 08:14 AM
Hi
before write the flash file you must reset dpf value to new or 0% with any diag tool like Autocom/Fiat ecuScan or other...
Mike
Understood!
mijatx
22nd December, 2014, 10:51 AM
Can you help me please to remove DPF from Fiat Doblo 1.3 mjet ECU MJD6F3.D1
-Flash and MPC 563 dump by BDM 100:
291881
291882
Do I have to reset all values to 0% related to DPF in the EEPROM with any diag. device before I write back dump files?
Thanks in advance!:)
smt
22nd December, 2014, 04:21 PM
http://www.digital-kaos.co.uk/forums/f173/fiat-doblo-1-3-mjet-need-help-dpf-off-455197/#post2443363
ziko
3rd February, 2017, 05:17 PM
Need dpf off ,readed with galleto , it takes 1 hour
Here is also flash via bdm readed
baltazar3
6th February, 2017, 03:21 PM
Need dpf off ,readed with galleto , it takes 1 hour
Here is also flash via bdm readed
Here is...pm
ecumix
18th June, 2018, 04:59 PM
Hi
baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
can you help me with dpf reset in eeprom doblo marelli mjd6f3
ecumix
18th June, 2018, 06:04 PM
here you are
baltazar3
18th June, 2018, 06:06 PM
Hi
baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
can you help me with dpf reset in eeprom doblo marelli mjd6f3
No prob m8...post flash here
baltazar3
18th June, 2018, 08:12 PM
here you are
Your file is not ORI.I dont have this Sw version:
Here is Your repaired file.Before flashing take a look with diag ash load %.If not "0",write ORI back,reset
and then write OFF file.......pm
baltazar3
26th June, 2018, 04:57 PM
here you are
Any news m8 ?
francobono
27th June, 2018, 10:23 PM
hello, maps pack for fiat punto same ecu but 90hp
regards
tomek0410
31st May, 2019, 06:38 PM
Here is ....pm
Check all sensors and reset eeprom.
Hallo, I have the same car Fiat Doblo 1.3 multijet MJD6F3.D1/HW03R. I'd like to disable DPF. Can I use this file (WinOLS (Fiat Doblo (dpf off)) ? Where can I get password?
yarikne
11th June, 2020, 06:22 PM
Hello! Need DPF EGR OFF
Help please
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.