PDA

View Full Version : Fiat Doblo 1.3 multijet dpf off



mipmf
12th December, 2014, 08:45 PM
Please remove dpf from file, car is Fiat Doblo 1.3 mjet ecu no 51839150,MJD 6F3.D1/HW03R, 85HP,file read with mpps.
Thanks!

baltazar3
12th December, 2014, 09:28 PM
Here is ....pm
Check all sensors and reset eeprom.

mipmf
13th December, 2014, 07:38 AM
dont have pm from you...

baltazar3
13th December, 2014, 12:21 PM
dont have pm from you...
Just send again.....check pm

mipmf
13th December, 2014, 08:54 PM
test on monday ,what is mean reset eprom?

mihaiservice
14th December, 2014, 09:46 AM
test on monday ,what is mean reset eprom?

Hi
before write the flash file you must reset dpf value to new or 0% with any diag tool like Autocom/Fiat ecuScan or other...


Mike

mipmf
16th December, 2014, 08:14 AM
Hi
before write the flash file you must reset dpf value to new or 0% with any diag tool like Autocom/Fiat ecuScan or other...


Mike
Understood!

mijatx
22nd December, 2014, 10:51 AM
Can you help me please to remove DPF from Fiat Doblo 1.3 mjet ECU MJD6F3.D1

-Flash and MPC 563 dump by BDM 100:
291881
291882

Do I have to reset all values to 0% related to DPF in the EEPROM with any diag. device before I write back dump files?

Thanks in advance!:)

smt
22nd December, 2014, 04:21 PM
http://www.digital-kaos.co.uk/forums/f173/fiat-doblo-1-3-mjet-need-help-dpf-off-455197/#post2443363

ziko
3rd February, 2017, 05:17 PM
Need dpf off ,readed with galleto , it takes 1 hour

Here is also flash via bdm readed

baltazar3
6th February, 2017, 03:21 PM
Need dpf off ,readed with galleto , it takes 1 hour

Here is also flash via bdm readed
Here is...pm

ecumix
18th June, 2018, 04:59 PM
Hi
baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
can you help me with dpf reset in eeprom doblo marelli mjd6f3

ecumix
18th June, 2018, 06:04 PM
here you are

baltazar3
18th June, 2018, 06:06 PM
Hi
baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
can you help me with dpf reset in eeprom doblo marelli mjd6f3
No prob m8...post flash here

baltazar3
18th June, 2018, 08:12 PM
here you are
Your file is not ORI.I dont have this Sw version:
Here is Your repaired file.Before flashing take a look with diag ash load %.If not "0",write ORI back,reset
and then write OFF file.......pm

baltazar3
26th June, 2018, 04:57 PM
here you are

Any news m8 ?

francobono
27th June, 2018, 10:23 PM
hello, maps pack for fiat punto same ecu but 90hp

regards

tomek0410
31st May, 2019, 06:38 PM
Here is ....pm
Check all sensors and reset eeprom.

Hallo, I have the same car Fiat Doblo 1.3 multijet MJD6F3.D1/HW03R. I'd like to disable DPF. Can I use this file (WinOLS (Fiat Doblo (dpf off)) ? Where can I get password?

yarikne
11th June, 2020, 06:22 PM
Hello! Need DPF EGR OFF
Help please