FVDI 18 softwares full + immo plus 13.6

[monter8484]

FVDI 18 softwares full + immo plus 13.6


https://mega.co.nz/#!WoJ0zYLQ!f64zqFC_jJtMUnTX3HL9fgQVY0h0dMOjAGsRl0k Q7dM




FVDI Software Version:
1.VAG - VW, Audi, Seat, Skoda:V21
2.Mercedes/Smart/Maybach:V64;
3.BMW:V10.3;
4.Porsche:V4.1;
5.OPEL/VAUXHALL: V6.2;
6.Peugeot/Citroen: V6.3;
7.Fiat/Alfa/Lancia:V5.4 ;
8.Renault:V5.4;
9.Toyota/Lexus:V6.0;
10.Hyundai/KIA:V2.1 ;
11.Nissan/Infiniti:V4.3;
12. Ford: V4.9
13. Chrysler: V3.1;
14. VOLVO: V4.3
15. Mitsubishi: V2.1;
16. DAF: V1.0;
17. Bike, Snowmobiles and Water scooters: V1.2
18.TAG Key Tool:V6.2;

[MarkPRP]

And? Without interface it's no good

[monter8484]

every diagnostic software Without interface it's no good :excitement:

[Rtronics]

and if you do have fvdi, just install and work ? i thought the software and interface serial number were linked.

[H.Wessel]

and if you do have fvdi, just install and work ? i thought the software and interface serial number were linked.

I heard that only works on fake fvdi ( copy of fvdi that have serial number 0), this was sold with 1 software and full, so with this link you can make your 1 soft to full fvdi.

[gwee]

FVDI 18 softwares full + immo plus 13.6


https://mega.co.nz/#!WoJ0zYLQ!f64zqFC_jJtMUnTX3HL9fgQVY0h0dMOjAGsRl0k Q7dM




FVDI Software Version:
1.VAG - VW, Audi, Seat, Skoda:V21
2.Mercedes/Smart/Maybach:V64;
3.BMW:V10.3;
4.Porsche:V4.1;
5.OPEL/VAUXHALL: V6.2;
6.Peugeot/Citroen: V6.3;
7.Fiat/Alfa/Lancia:V5.4 ;
8.Renault:V5.4;
9.Toyota/Lexus:V6.0;
10.Hyundai/KIA:V2.1 ;
11.Nissan/Infiniti:V4.3;
12. Ford: V4.9
13. Chrysler: V3.1;
14. VOLVO: V4.3
15. Mitsubishi: V2.1;
16. DAF: V1.0;
17. Bike, Snowmobiles and Water scooters: V1.2
18.TAG Key Tool:V6.2;

...........................for?
...........................:banghead:

[autocheck]

the interface with only 0 zero or starts with zero 0 ?

[autocheck]

on which interfaces does this software work on ?


FVDI 18 softwares full + immo plus 13.6


https://mega.co.nz/#!WoJ0zYLQ!f64zqFC_jJtMUnTX3HL9fgQVY0h0dMOjAGsRl0k Q7dM

(https://mega.co.nz/#!WoJ0zYLQ!f64zqFC_jJtMUnTX3HL9fgQVY0h0dMOjAGsRl0k Q7dM)




FVDI Software Version:
1.VAG - VW, Audi, Seat, Skoda:V21
2.Mercedes/Smart/Maybach:V64;
3.BMW:V10.3;
4.Porsche:V4.1;
5.OPEL/VAUXHALL: V6.2;
6.Peugeot/Citroen: V6.3;
7.Fiat/Alfa/Lancia:V5.4 ;
8.Renault:V5.4;
9.Toyota/Lexus:V6.0;
10.Hyundai/KIA:V2.1 ;
11.Nissan/Infiniti:V4.3;
12. Ford: V4.9
13. Chrysler: V3.1;
14. VOLVO: V4.3
15. Mitsubishi: V2.1;
16. DAF: V1.0;
17. Bike, Snowmobiles and Water scooters: V1.2
18.TAG Key Tool:V6.2;

[monter8484]

fvdi starts with zero 0

[autocheck]

mine starts with zero 0 , but its saying " interface not calibrated "

[NiZaTroniC]

don't waste your time white this
it's not gonna works
regards

[soxten]

I can't install this "full" setup.
I get problem on every map as it try to write the program.exe
Someone as have this problem too?



Christian Johansson via Iphone 5s

[autocheck]

Anyone who can calibrate the Fvdi interface work on all 18 software ..?.? Only have Ford , hyundai and tagtool working , others saying "interface not calibrated " .

[peko]

so nobody have success ? who post it without test it ...

[tziku]

Hi, i try to activate my FVDI full by an user "K*ER" . All was ok , when i use "Dump Tool" in renault i have error "Interface Not Calibrated" then red light on interface, now my interface is bricked not recognized by pc. I compare with another interface and problem is from software, i can't reflash interface and nothing interface complete dead. Now user "K*VER" no refund no repair solution, he destroy my interface.

[turbocip]

Thanks for sharing

[autocheck]

Here is working FVDI full activated.
Give thanks and reputation if this helped you.

Can you sort out the "INTERFACE not calibrated " error ?

[turbocip]

You need to have cracked fvdi
Have a great day

[H.Wessel]

Here is working FVDI full activated.
Give thanks and reputation if this helped you.

Does it work with any FVDI??????

[turbocip]

If u have cracked FVDI with not full sw, you can use that sw and will be FULL youre FVDI!
IF u don't have cracked FVDI or u have AVDI and you installing that sw, not will change.... you will getting error : interface is not calibrated

[peko]

hi

so maybe, better is begin to post files to crack fvdi ... to will use your file full

;)

[autocheck]

Thanks Peko, we need a patch to cracking the Fvdi interface. [emoji23] [emoji23] [emoji23] [emoji23]

[peko]

what is name of this crack or this file ?

[gurmk]

@ turbocip

How to crack FVDI

[sosmecano]

Here is working FVDI full activated.
Pass in PM (No Reputation and Thanks - No Pass)
pass please

[super jumbe]

Mine already dogy, pass please..

[jolidj]

you box is fuul. pass please.

[dyzio]

pass pleas

[turbocip]

Try again. Is clean now

[andrym3]

Here is working FVDI full activated.
Pass in PM (No Reputation and Thanks - No Pass)

Pass please.Thanks

[kelekele]

To use this kind of full activated fvdi software your interface must have serial number 000000.
If someone can change s/n to zero,then is able to use this soft.In other way get error "interface not calibrated".

[autocheck]

Who can change the serial number to 000000 ??

[pcofre]

pass please.

[tipoune2002]

HELLO
send me pass please

[diagun]

pass please

[baltazar3]

pass please

[kango11]

Pass please.Thanks

[eleeinidis]

HELLO Turbocip
send me pass please
Thanks

[blackpirate]

you dont need the psssword!
you cant do anything with the software! actvations are inside device not on software! the software its the same for all devices! database in mcu control activation!!

DONT BOTHRR TAKEING THE SOFTWARE, IT WILL NOT MAKE YOUR DEVICE FULL!!!!!!!!!!!!!!!!

[jolidj]

my interface dont have serial 000000. what can i do?

[blackpirate]

my interface dont have serial 000000. what can i do?
if its old pcb 3 you can make it full for some cash! in not, only to buy new unit!

[cfgebel]

i have fvdi with peugeot activate serial n 09313

with pcb 3 can make it full with this software ?

[psx1]

pass please

[jolidj]

wen can i see what pcb have??

[icogsm]

Pass please.Thanks

[shoy]

Please pass

Thanks

[yui]

pass please

[cemox]

Please pass

[Meat-Head]

Pass only in PM (No Reputation and Thanks - No Pass)

What kind of a cock statement is that.

your inbox will be for ever full off passss thanks, serves you right.

this thread will very soon be 16 pages of passsss thanks.

may your next shit be all your passwords.
Join Date
Oct 2009
Posts
188
Thanks
10
Thanked 24 Times in 5 Posts
Downloads
96
Uploads
0

[turbocip]

My inbox is not full !
now i will delete my post and delete all posts about pass , all will be ok
Have a great night .
i will share without password tomorrow in new thread .

[skens]

hi
thx for sw
please send the link where to buy interface 000000
regards

[monter8484]

i have some extra softwares for fvdi --- FW generator :)
No pass just press Thanks :)

[whiskeyman]

i have some extra softwares for fvdi --- FW generator :)
No pass just press Thanks :)

so what these do?

[isma123]

T OBRICK interface dont use them

[sapopt]

HELLO
send me pass please

[7936]

On units with all open. Need to run from main exe with all autos showing it has a loader built in.

[gopelhu]

hi all,

here is the link without pass... this is only cracked version....

https://mega.nz/#!eU1FiCrT!w-QZboKD49galkbmy2SpzRC0Zvco81nzhgrUunu1-OM

furthermore i can rewrite and change any avdi/fvdi serial :)

regards

[peko]

hi all,

here is the link without pass... this is only cracked version....

https://mega.nz/#!eU1FiCrT!w-QZboKD49galkbmy2SpzRC0Zvco81nzhgrUunu1-OM

furthermore i can rewrite and change any avdi/fvdi serial :)

regards

hi friend

is compatible with all fvdi ?

;)

[igorr]

only 000000 serial

[gopelhu]

hi friend

is compatible with all fvdi ?

;)


It is the cracked version....

if you need the orig fly version, pls write me asap and pls let me know what version do you need?

I have are the following:

Quickloader V4.0 , V5.0, V6.0, V6.2 and V6.3

V6.2 and V6.3 are with sofdog versions.

Regards, G

[crashi]

very nice, you made my day :-)

[thebigf2]

Hello Friends,

i need an AVDI Interface which Tool should i buy ?

[kuzia]

Привет
пришлите мне, пожалуйста

[giedri]

Pass please.Thanks

[lanrceds]

You already successfully tested?thanks

[totoo]

417270417271417272

[tawaf111]

thank you friend good partage im need't

[totoo]

Audi A6/A7/A8, VW Touareg , All keys lost


1,By OBD mode;
2,Key maker mode;
3,From 2010 to 2014-6;
4,Add key(free);
5,All keys lost(charge,online,6 minutes Only);
Note: BCM2 All keys lost (Audi A6/A7/A8, VW Touareg)
1,key maker mode, need to read BCM2(CG 100,Auto 200 ,Auto 300 and Orange 5 etc) and ELV(Orange 5) data;
2,By OBD mode, need to read ELV(Orange 5) data;

[totoo]

FVDI 2 and FLY OBD Terminator functions:


A4, S4, RS4, A5, S5, RS5, Q5, All keys lost


1,By OBD mode;
2,Key maker mode;
3,From 2010 to 2014-6;
4,Add key(free);
5,All keys key(free);
6,2016-12-22

[totoo]

FLY OBD Terminator do 2013 Audi A6L all keys lost video: https://v.qq.com/x/page/g0360dq812j.html


HIT! VAG BCM2 ALL KEYS LOST FOR AUDI A6/A7/A8,TOUAREG. Video link https://www.youtube.com/watch?v=dAzTehyRc9Y&t=10s

[haitam2017]

Hello how are you I want just announced.
Programme Immo Universal Decoding 3.2

[szengen]

Tooto + tow truck

[raimongil]

pase please.thanks

[totoo]

FVDI 2 Update online(2017-2-16) 4th immobilizer system


VW/Audi/Skoda/Seat/Porsche/Bentley vehicles all have 4th immobilizer car. (How to verify new key is dealer key? Key is learned success or not? Transponder is correct or not? Car ignition switch is work fine or not? About this you can find answer for Immo status in “Key Learn ->Key Learn”) Support following types:
1. Instrument - CDC3217/CDC3297/CDC3272 + 24C32
2. Instrument - NEC+24C32
3. Instrument - NEC+24C64
4. Instrument - NEC+24C64 (2013-)
5. Instrument– NEC+24C64 (2012 TFT color display)
6. Instrument– NEC+24C64 (2013 TFT color display)
7. Instrument– NEC35xx
8. Instrument– NEC+95320
9. Instrument– Motorola 9S12XHZ512(Golf6 MM7 – 2011)
10. Instrument– NEC+95320(Johnson Controls)
11. Instrument– NEC+95320(JCI – 2013 Bora/Jetta)
12. Instrument– Visteon
13. VW Passat B6/B7/CC Key Learn
14. Touareg/Phaeton/A8/Cayenne/Bentley 4th immobilizer
15. Audi A1 – NEC+24C64
16. Audi A3/TT/R8 – CDC3217/3297 + 24C32
17. Audi A4 – instrument Crypto RB4 (2001+)
18. Audi A4 –instrument Crypto RB8 (2004+)
19. Audi A6/Q7/Allroad – EZS-Kessy
20. Audi Q3

[kappaca]

hello can make my fvdi mercedes fiat full?

[totoo]

SVDI 2 = VVDI 2 , SVDI 2 support VVDI2 VAG , BMW and Transponder Programmer, software version is V3.0.3, Only 499 USD ;

[totoo]

Specific Function: VAG BCM2 ALL KEYS LOST FOR AUDI A6/A7/A8/TOUAREG from 2009 to 2013-6 is free for all fvdi 2 full and fvdi 2 vag customers.

[alyko88]

LINK PLEAS

[totoo]

Good News:
1, vvdi 2 VAG is free for all fvdi 2 VAG customers;
2, vvdi 2 BMW,is free for all fvdi 2 BMW customers;
3, vvdi 2 FULL ,is free for all fvdi 2 FULL customers;

[totoo]

Good News : you can exchange fvdi v2014 to fvdi 2 , please contact fly support engineer.

[spanaz1]

What are these for mate? I mean the files on page 4 post 52.

[Plah]

I need help! FVDI blinks red diode.

[Plah]

it doesn't help.

[Plah]

I think something is missing.

[Plah]

Can share a working calculator FWGenerator V34??? Thank you.

[diagauto741]

PASS PLAISE

[mohamedrhim]

FVDI 18 softwares full + immo plus 13.6


https://mega.co.nz/#!WoJ0zYLQ!f64zqFC_jJtMUnTX3HL9fgQVY0h0dMOjAGsRl0k Q7dM




FVDI Software Version:
1.VAG - VW, Audi, Seat, Skoda:V21
2.Mercedes/Smart/Maybach:V64;
3.BMW:V10.3;
4.Porsche:V4.1;
5.OPEL/VAUXHALL: V6.2;
6.Peugeot/Citroen: V6.3;
7.Fiat/Alfa/Lancia:V5.4 ;
8.Renault:V5.4;
9.Toyota/Lexus:V6.0;
10.Hyundai/KIA:V2.1 ;
11.Nissan/Infiniti:V4.3;
12. Ford: V4.9
13. Chrysler: V3.1;
14. VOLVO: V4.3
15. Mitsubishi: V2.1;
16. DAF: V1.0;
17. Bike, Snowmobiles and Water scooters: V1.2
18.TAG Key Tool:V6.2;PASS PLAISE
Thank you so very much

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

[mohamedrhim]

hi all,

here is the link without pass... this is only cracked version....

https://mega.nz/#!eU1FiCrT!w-QZboKD49galkbmy2SpzRC0Zvco81nzhgrUunu1-OM

furthermore i can rewrite and change any avdi/fvdi serial :)

regardsThe link is empty please send me this program

Thank you

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

[brend]

All fvdi SW calculated individual NXP Mcu ID away.
All NXP with individual ID and it's mean you can't put to work fvdi with same another sw,it's not work or kill your's device that's it!



The link is empty please send me this program

Thank you

تم الإرسال من Redmi Note 6 Pro باستخدام Tapatalk

[PierreTheron]

The best thing they release is vw latest an work almost like vvdi .Which i belived vvdi copied and almost made it there own with some updates ,,
I still believe maxisyst is the leader here ,.....

[putins]

Hi there! I need some help. A have upgraded my FVDI 2015 diagnostic tool with FWDownloader V2 and understood that I
miss "Table data" file and the tool now is "bricked". Could someone help me to get this "Table data" firmware file?
I have already uploaded:
Firmware 1 v.: 2.18
Firmware 2 v.: 2.10
Many thanks!

[ludek1]

Hello, I have problem with my FVDIv 2018 with 18 software programem conected with server ok but not synchronized with programmer pleas help me thanks

[ludek1]

PASS PLAISE
PASS PLEASE