PDA

View Full Version : Dpf off Ford Focus edc16c34



yannsaba
20th December, 2014, 06:27 PM
Hi guys I have a problem with the fap off this ford focus. The classic switch off the edc16c34 E5 does not work, the dpf off implementing Volta Sensor Decoding seems to work, but in addition to clear the entire area dtc me a message appears on the dashboard "Diesel filter clogged". Does anyone have a tested solution for this car. It is a ford focus 1.6 tdci Euro 5. With the classic switch off I find errors related to the probes of differential pressure, because of the dpf emptied.

junnnior
20th December, 2014, 07:00 PM
one bit change

dom8
20th December, 2014, 07:16 PM
i think In the dump find "01 01 00 0C 3B 0D" string and replace it to "00 01 00 0C 3B 0D

yannsaba
7th February, 2015, 12:41 PM
i have problem with this car. The single bit solution doesn't work and regeneration started. The solution with volta work but erase the dtc table. Everyone have a tested solution. I need help also remapping. Thank you in advance

ominimicu
7th February, 2015, 01:18 PM
i d say more than 1 bit. but as always sensors must be ok just for bits solutions ;D

soundnavigator
7th February, 2015, 04:49 PM
Good FAP OFF solution is with all sensors off and not 1 bit solution.

BR

AndrewW
7th February, 2015, 11:27 PM
your dump off

soundnavigator
8th February, 2015, 08:18 AM
Not good solution.

AndrewW
8th February, 2015, 01:51 PM
i think you dont know what are you writing:mad-new:,that solution is not good it is just perfect solution,done many cars and never ever problems,just checksum with BDM,first check after than tell good or bad,you didint check just write it is not workning,first check before you will write not true thinks,i done file and i wait for report,we will see working or not working...i am sure it will be 100% ok because i never ever had any problems,i done for free don't want any money$$$,no password FREE FOR EVRYBODY !!!

soundnavigator
8th February, 2015, 02:51 PM
OK ... and you know what you doing ? Maybe you also tried to disconnect EGT and differential sensors, Additive and etc ? I am sure that not. When you tried and all is ok, then post solutions and named is as "good" ?r "worked".

BR

AndrewW
10th February, 2015, 12:13 AM
you check my map?any anserw?