A4 CAB VIRGINE DASH

[tipoune2002]

HELLO
i have a probleme with my dash ori
dump hs and dash too

i have buy a new read the dump
help me to Virgin the dump
dash 8H0920900D
THANK FOR ALL

[audivwauto]

one its been virgined all data will be gone and you will have to programme vin ...serial numbers ect...whats wrong with old dump? did you use cheap chineese tool for millage ?
you can adapt secondhand cluster to the ecu

[tipoune2002]

the original dash is down to nothing works (failure) he went to repair and 24C04 was broken
the dash that I find no not have the same code
This is why I wanted to put a virgin and recode with VAS5054 or vcds (vin immo key ...)

[audivwauto]

vigin wont help ,is it not 24c08 ?read pin from cluster ,code new transponder and align please

[yugo45]

HELLO
i have a probleme with my dash ori
dump hs and dash too

i have buy a new read the dump
help me to Virgin the dump
dash 8H0920900D
THANK FOR ALL

Virgin dahs can be done only Via OBD.


vigin wont help ,is it not 24c08 ?read pin from cluster ,code new transponder and align please

Yes it will help if you Virgin dash to Mode 04. This is Rb4 Immo 3 and it can be done with VCDS once you put dash in Virgin/New 04 mode.

[audivwauto]

you right but I can only virgin obd 2

[badisan]

HAPPY NEW 2015!...:)

Послато са GT-I9001 користећи Тапаток 2

[tipoune2002]

hi and happy new year to all
with what tool I can do
I have yet immo off the engine
but when I turn on the car there are the warning
with ABRITES I can change the km
but I was unable to change the vin and set the key
thank for help

i read 24C08 dash ori but i dont no is it good

[Rerouter]

Looks like a valid dump,
Vin: WAUZZZ8H83K032681
Part: 8H0 920 930D
mileage : 94992
Year: 2003

Your first dump was:
VIN: WAUZZZ8H94K023389
Part: 8H0 920 900D
Mileage: 0
Year: 2004

[Rerouter]

Don't know if this will work, but i changed the VIN and part number to match your original, see how it goes,

[audivwauto]

still don't know why you cant code key , align to the ecu ....so simple takes 5 min,you all making lots of work for yourself

[tipoune2002]

hello

how you made the alignment
with what tool
you have a method
thank for your hepl

[audivwauto]

vcd .....code key to cluster first(tp24canbus).....then login in ecu ....adaption 50 ...add new cluster pin and save

[yugo45]

hello

how you made the alignment
with what tool
you have a method
thank for your hepl

http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_%28Instrument _Cluster%29


vcd .....code key to cluster first(tp24canbus).....then login in ecu ....adaption 50 ...add new cluster pin and save

Wrong, you need to adopt cluster to ECu not ECU to cluster.
This is immo 3 and does not need tp24canbus , ID 48 will work. Also if you replacing cluster old keys will work , it does not need new transponder.

[audivwauto]

strange.... that all my Audi B6's are running after my method done.

[tipoune2002]

hello
can you confirme my pin code in the ecu 24C04
THANK FOR YOUR HELP

[yugo45]

strange.... that all my Audi B6's are running after my method done.

It will work the way you said but VIN number will be different form car. Because if you adopt ECU to second hand cluster , ECU will get VIN form that cluster , not from car.
That is why you need to adopt cluster to ECU , Not ECU to cluster ,So adaptation needs to be done in Cluster at Ch 50 , not in ECU.

[yugo45]

hello
can you confirme my pin code in the ecu 24C04
THANK FOR YOUR HELP

Pin = 01360.
Now, put new cluster to New Mode.
After that ,
With VCDS go to Instruments -17
Go to adaptation -10
Ch 50
READ
In New value put Pin = 01360
Click TEST - wait till in left upper corner you see VIN
Click SAVE
Do it,
Close controller and go out,
Turn ignition off .
Wait 30 Sec.

With VCDS go to Instruments -17
Go to adaptation -21 and adopt keys.